China Best Sales 1.5 Meter Diameter Honed Steel Pipes for Hydraulic Cylinders near me factory

Product Description

Name : honed tubes, honing pipe, hydraulic cylinder tubes, pneumatic cylinder tubes, honed pipe, honing tube, seamless honed steel tube, precision tubes, cold drawn honed tubes, skived tubes, skived and roller burnished tubes, skived pipes, SRB tube, SRB pipe, hydraulic SRB tube, hydraulic cylinder skived tubes

Popular standard and steel grade:

EN10305-1

E355 E235 E410 E470 C45E

DIN2391-1

ST52 ST45 ST52.3

ASTM A519

SAE1571 SAE1045 SAE1026

GB/T

20# 45# 16Mn Q345B Q345D Q345E 42CrMo 27SiMn

 

Application: hydraulic cylinder, pneumatic cylinder,Jack, cylinder barrel

Manufacture Method: cold drawn, cold rolled, Hot rolled+Deep Hole Boring 

Heat Treating Method/Delivery Condition:

 

BK

BKS

GBK

NBK

Q+T

+C

+SR

+A

+N

Q+T

Cold drawn

Stress relieved

Annealed

Normalized

QUENCHED + TEMPERED

 

 Hydraulic & pneumatic tube size and parameters:

 

 

Manufacture

method

Cylinder ID (mm)

Length

(m)

Straightness

(mm/m)

Tolerance

on ID

Tolerance

on WT

Roughness

(μm)

 

Cold drawn

40-420

≤16M

0.2-0.5

Depends on

 requirement

±8%

0.8-1.6

 

Cold rolled

30-100

≥14M

0.2-0.5

Depends on

requirement

±5%

0.8-1.2

cold drawn-

honed

40-420

14M

0.2-0.3

H8-H9

±8%

0.2-0.8

Cold drawn-skived & burnished

40-300

9M

0.2-0.3

H8-H9

±8%

≤0.4

Deep hole

boring- honed

50-1000

12M

0.2-0.3

H8-H9

±8%

≤0.8

Deep hole

boring- skived

50-300

9M

0.2-0.3

H8-H9

±8%

≤0.4

 

Mechanical property:

 

Final Supply

Condition

Cold finished

(Hard)(BK)

Cold drawn and stress-relieved (BK+S or + SR)

Hardness HB

Parameters

T.S

obN/mm2

Elongation

δ5%

T.S

obN/mm2

Y.S

OsN/mm2

Elongation

δ5%

20# (A106B, ST45, E255)

>=550

>=8

>=520

>=375

>=12

175

45#(CK45)

>=650

>=5

>=600

>=500

>=10

190

Q345B(ST52, E355)

>=640

>=5

>=600

>=520

>=15

190

25Mn

>=640

>=5

>=600

>=510

>=15

195

27SiMn

>=840

>=5

>=720

>=600

>=10

210

Chemical Properties:

 

Material

C%

Mn%

Si%

S%

P%

20#

0.17-0.23

0.35-0.65

0.17-0.37

≤0.035

≤0.035

ST45

≤0.21

≥0.4

≤0.35

≤0.571

≤0.571

E255

≤0.21

0.4-1.1

≤0.35

≤0.571

≤0.571

45#

0.42-0.50

0.50-0.80

0.17-0.37

≤0.035

≤0.035

Q345B

≤0.20

≤1.70

≤0.50

≤0.035

≤0.035

E355

≤0.22

≤1.6

≤0.55

≤0.571

≤0.571

ST52

≤0.22

≤1.6

≤0.55

≤0.04

≤0.04

25Mn

0.22-0.29

0.70-1.0

0.17-0.37

≤0.035

≤0.035

27SiMn

0.24-0.32

1.10-1.40

1.10-1.40

≤0.035

≤0.035

 

Tolerance on ID:

ID

Tolerance for ID  (μm)

H7

H8

H9

H10

30

+21

0

+33

0

+52

0

+84

0

>30-50

+25

0

+39

0

+62

0

+100

0

>50-80

+30

0

+46

0

+74

0

+120

0

>80-120

+ 35

0

+ 54

0

+87

0

+140

0

>120-180

+40

0

+63

0

+100

0

+160

0

>180-250

+46

0

+72

0

+115

0

+185

0

>250-315

+52

0

+81

0

+140

0

+210

0

>315-400

+57

0

+89

0

+170

0

+230

0

 

Part of size list (ID*OD)

40*50

 

100*127

 

240*273

40*55

 

110*130

 

250*266

50*60

 

120*140

 

250*280

50*63

 

120*145

 

250*300

60*70

 

125*140

 

280*323

60*73

 

125*145

 

280*325

63*73

 

140*165

 

300*320

63*76

 

140*168

 

300*356

70*80

 

150*180

 

320*340

70*82

 

160*184

 

320*356

70*85

 

160*194

 

320*370

80*90

 

170*200

 

350*370

80*92

 

180*210

 

400*420

80*95

 

200*216

   

80*100

 

200*220

   

90*102

 

200*232

   

90*105

 

200*245

   

100*114

 

220*250

   

100*121

 

220*273

   

 

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are 3 main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
air-compressor

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16" and an overall width of 4½". U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat's drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It's a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
air-compressor

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join 2 heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or "slips" can be purchased separately. Whether you need a new 1 or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT's drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don't want to modify your existing drivetrain, we can even make a custom yoke for you.

China Best Sales 1.5 Meter Diameter Honed Steel Pipes for Hydraulic Cylinders     near me factory China Best Sales 1.5 Meter Diameter Honed Steel Pipes for Hydraulic Cylinders     near me factory