China manufacturer CZPT and CZPT Kind Multistage Hydraulic Telescopic Cylinder for Dump Truck with Good quality

Product Description

Product Description

Quick details

Gland ----High grade ductile iron

Tube  -----Cold drawn honed tubling

Piston-----High grade ductile iron

Piston rod----Chromed C45

Piston seal----Urethane seal

End cap----Casting seel

Mounting style----Pins and clips included

Gland seals----Polyurethane U-cup

Rod wiper----Urethane snap in

Paint color----Semi-gloss black, grey, red

1.Light-weight,high strength

   Base on the nature of construction work,the hydraulic cylinders need to suit for high strength,high

   using frequency,high fatigability.to promise the sability and reliablity of application.

2.the seal system

   select the excellent seal kits from japan and germany.adopt the advanced physical design,make

   sure the hydraulic cylinder get the best piston rod oil film

3.cylinder body

   adopt the good-quality alloy honed tube,though cold-drawing and rolling,to reach an excellent

   toughness and surface hardness.improve the wear-resistance.

4.piston rod

   middle frequency induction hardening and tempering,chrome plated on rod surface to improve the

   anti-rust ,wear-resistance and anti-scratch property.

5.safety/cushioning fuction

   The inside of cylinder set up an cushioning device in the end of stroke,it can absorb the juge inpact.

Technical Specification size.
 

cylinder diameter (mm)

piston rod diameter (mm)

max stroke (mm)

40

20

22

25

500

50

25

28

32

600

63

32

35

45

800

80

40

45

55

2000

90

45

50

63

2000

100

50

55

70

4000

110

55

63

80

4000

125

63

70

90

4000

140

70

80

100

4000

150

75

85

105

4000

160

80

90

110

4000

180

90

100

125

4000

200

100

110

140

4000

220

110

125

160

4000

250

125

140

180

4000

 Cylinder tube machining

  
  
  Piston 
  

Application boom cylider, stick cylinder, Dozer cylinder.
 

Excavator Type Name Stroke  (mm) Installation Diameter(mm) Cylinder Diameter(mm) Rod Diameter(mm)
5.5T Boom Cylinder 710 1120 115 65
Stick Cylinder 815 1210 90 55
Bucket Cylinder 605 945 85 55
Dozer Cylinder 150 500 110 60
6.5T Boom Cylinder 885 1311 110 65
Stick Cylinder 900 1300 90 60
Bucket Cylinder 730 1120 80 50
Dozer Cylinder 145 565 130 70
11.5T Left Boom Cylinder 980 1480 100 70
Right Boom Cylinder 980 1480 100 70
Stick Cylinder 1571 1530 115 80
Bucket Cylinder 885 1375 95 65
18.5T Left Boom Cylinder 1195 1790 120 85
Right Boom Cylinder 1195 1790 120 85
Stick Cylinder 1405 2000 130 95
Bucket Cylinder 1110 1630 110 80
20T Boom Cylinder 1285 1870 120 85
Stick Cylinder 1490 2075 135 95
Bucket Cylinder 1120 1680 115 80
23T Boom Cylinder Assembly 1295 1870 130 90
Stick Cylinder Assembly 1675 2225 140 100
Bucket Cylinder Assembly 1156 1744 130 90
26T Boom Cylinder Assembly 1420 1980 139 100
Stick Cylinder Assembly 1748 2348 149 110
Bucket Cylinder Assembly 1130 1753 134 100
40T Boom Cylinder Assembly 1495 2135 160 110
Stick Cylinder Assembly 1790 2480 170 110
Bucket Cylinder Assembly 1285 1990 160 110

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment 30%TT in advance. 70% T/T before shippment

Guide to Drive Shafts and U-Joints

If you're concerned about the performance of your car's driveshaft, you're not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.
air-compressor

Symptoms of Driveshaft Failure

Identifying a faulty driveshaft is easy if you've ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you've taken precautions by checking your car's oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it's time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you're not sure what's causing the noise, check your car's transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
air-compressor

Drive shaft type

Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the 3 most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you're looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows 1 shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it's not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You'll be back on the road soon!

U-joint

If your car yoke or u-joint shows signs of wear, it's time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can't find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don't have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car's transmission or other critical components. Replacing your car's U-joint early can ensure its long-term performance.
Another option is to use 2 CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
air-compressor

maintenance interval

Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle's mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle's driveshaft should be inspected at least every 60,000 miles. The vehicle's transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT's East Lexington experts. These services should be performed every 2 to 4 years or every 24,000 miles. For best results, refer to the owner's manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.

China manufacturer CZPT and CZPT Kind Multistage Hydraulic Telescopic Cylinder for Dump Truck     with Good qualityChina manufacturer CZPT and CZPT Kind Multistage Hydraulic Telescopic Cylinder for Dump Truck     with Good quality