China Standard Original Enerpac Aluminum Hollow Piston Hydraulic Cylinder Rach-1008 with Free Design Custom

Product Description

Product Description
Original Enerpac RACH Series Aluminum Hollow Piston Cylinder

Product description:Hydraulic Cylinders, Jacks, Lifting Products and Systems

Enerpac provides the largest selection of cylinders and lifting systems, fully supported and available through the most extensive network of distributors worldwide. We have a solution for virtually any application - lifting, pushing, pulling, bending or holding - in most industrial and commercial work environments. Enerpac offers hundreds of different configurations of mechanical and hydraulic cylinders and lifting systems, plus products ranging from hydraulic jacks for portability and tight fits, to engineered systems for precise control over multiple lift points.

General Purpose Hydraulic Cylinders

Enerpac general purpose cylinders are available in hundreds of different mechanical or hydraulic cylinder configurations. Whatever the industrial application; lifting, pushing, pulling and available in range of force capacities, stroke lengths or size restrictions. Single acting, hollow plunger, or low height, you can be sure that Enerpac has the hydraulic jack to suit your high force application. RC, RSM, RCS, CLP, RCH, RRH, BRC, BRP, SC-series

Product pictures and catalogue:

Cylinder Parameter:

Cylinder
Capacity
Stroke Model
Number
Cylinder
Effective Area
Oil
Capacity
Collapsed
Height
Extended
Height
Outside
Diameter
Weight
ton (kN) mm cm2 cm3 mm mm mm kg
                 
60 (606) 50 CLP-602 86,6 432 125 175 140 15
100 (1571) 50 CLP-1002 146,8 734 137 187 175 26
160 (1619) 45 CLP-1602 231,3 1040 148 193 220 44
200 (1999) 45 CLP-2002 285,6 1285 155 200 245 57
260 (2567) 45 CLP-2502 366,8 1650 159 204 275 74
400 (3916) 45 CLP-4002 559,5 2517 178 223 350 134
520 (5114) 45 CLP-5002 730,6 3287 192 237 400 189

Our Company Description:

This is SUNSHINE SEASON INDUSTRY (CHINA) CO., LTD., our Marine section is specialized in marine products for many years, like aluminium boat, fiberglass boat, outboard ect., we set up our own factory in ZHangZhoug province. So far, we have exported to Australia, Singapore, Malaysia, Brazil, Uruguay, South Africa, Nigeria, Kenya, and Russia etc..
We warmly welcome your inquiry !

 Company Information
SUNSHINE SEASON is a?professional hydraulic tools and products ENERPAC distributor in China., we have been in this
business for more than 20 years. Our products have been widely used in petrochemical, cement, shipbuilding, steel plant, 
and heavy constructions areas, etc.
 FAQ
1). Q: What is the material of your products?
A: Iron, Steel, plastic, etc.
2). Q: How about quality control in your factory?
A: "Quality is first, Customers are friends".?
SUNSHINE SEASON are always paying great attentions to quality controlling from the beginning to the end. Every piece of goods is tested strictly 1 by 1 before packing.
We keep goods to meet the standard of CE, CCC, ISO9001: 2000.
3). Q: How about guarantee?
A: It's within 6 months after goods is discharged in the destination.
4>. Why Choose SUNSHINE SEASON
Quality 
SUNSHINE SEASON is the ENERPAC authorized
 distributor in china, all goods are ENERPAC quality.
Service --- The right things
 should be done well and the good things right.

 

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are 3 main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
air-compressor

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16" and an overall width of 4½". U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat's drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It's a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
air-compressor

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join 2 heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or "slips" can be purchased separately. Whether you need a new 1 or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT's drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don't want to modify your existing drivetrain, we can even make a custom yoke for you.

China Standard Original Enerpac Aluminum Hollow Piston Hydraulic Cylinder Rach-1008     with Free Design CustomChina Standard Original Enerpac Aluminum Hollow Piston Hydraulic Cylinder Rach-1008     with Free Design Custom