Tag Archives: hyva hydraulic cylinder

China China factory supply long stroke multi stages lift kits hyva type hollow Telescopic Hydraulic Cylinder for dump truck hydraulic cylinders design

Error:获取返回内容失败，
Your session has expired. Please reauthenticate.

Hydraulic Cylinders and Their Components

Typically, a hydraulic cylinder is used in manufacturing machinery, construction equipment, civil engineering, and elevators. A hydraulic cylinder is also known as a mechanical actuator. A hydraulic cylinder is a type of mechanical actuator that is used to provide unidirectional force.hydraulic cylinders

Piston rod

Choosing the correct rod for hydraulic cylinders can improve the performance and dependability of the machine. While the diameter is always important, the length is also crucial. If the length of the rod is too short, it will crush or fail. On the other hand, if the rod is too long, it will become twisted or misaligned.
The rod seal is the most important seal in a hydraulic cylinder. It protects the cylinder from fluid leaks and system pollutants. It also handles gradual changes in system pressure.
There are many types of seals for hydraulic cylinders. Some of them are special and designed to work under intense pressure. These seals also have backup rings.
A piston rod can be either hollow or solid. It is usually made of steel or stainless steel. It is often coated with hard chrome plating. A polished surface is also an option.
Choosing the correct seal is a crucial step in ensuring the longevity of your piston rod. Rod seals are subject to the most harsh conditions. They need to be made from materials that are slow to wear and will not contaminate the cylinder.
The correct rod seal is also important in preventing fluid leaks. They also protect the cylinder from pressure extremes in the system. If the seal fails, the cylinder will be damaged. The seal is also important because it prevents system pollutants from damaging the rod.
A hydraulic cylinder can be single acting or double acting. Single acting cylinders have one pressurized chamber while double acting cylinders have two. Typically, double acting cylinders have a piston that is extended under hydraulic pressure and retracts under hydraulic pressure.

Piston seals

Choosing the correct hydraulic cylinder piston seal is important to the operation of a hydraulic cylinder. There are various types of seals that can be used to help ensure proper operation of a cylinder. They range from single-action to double-acting seals. The seal’s material and its profile affect its performance.
The materials used to make piston seals range from rubber to thermoplastic polyurethane. The material’s elasticity and strength are also important. Typically, plastic seals have more focus on adding strength to the cylinder than on flexibility.
Rubber seals are used when a higher degree of flexibility is required. They are also used when a higher degree of compressibility is required. Some rubber seals are designed to withstand higher temperatures.
Piston seals are made from a variety of materials, including Viton, nitrile rubber, and polytetrafluoroethylene (PTFE). PTFE piston seals have less friction, which is a good thing. A PTFE seal is also able to handle higher temperatures.
In order to properly seal a cylinder, the seal must maintain contact with the cylinder bore. This ensures that fluid does not flow past the piston. The seal’s profile must also leave a small amount of oil film when it passes along the cylinder bore.
Thermoplastic elastomers are designed to offer superior elasticity. They also stand up to abrasion and high use. They also exhibit unmatched performance at extreme temperatures.
A piston seal can be designed to meet various requirements, including the highest pressures that can be expected. Some manufacturers offer custom sealing solutions. These solutions include testing, according to the customer’s specifications. They can also include failure analysis and system investigations.
Thermoplastic elastomers are also designed to be resistant to tearing. In addition, they are able to maintain a constant pressure for a longer period of time than other materials.hydraulic cylinders

Mounting attachments

Using mounting attachments for hydraulic cylinders can reduce wear and tear on seals and bearings, and provide stability to the cylinder. There are three main groups of mounts: flange, lug, and clevis. Each style is designed for a different purpose. Choose the mount that is best for your hydraulic cylinder.
Flange mounts are a good choice for straight-line force-transfer applications. These mounts come in rectangular or square shapes and can be attached to the head or cap of a cylinder. They are very strong and are not prone to misalignment. They are also available in rod-end styles, which are recommended for tension applications.
Side lug mounts are used for small or light-duty hydraulic cylinders that require a straight-line force transfer. These mounts have lugs on the sides of the mount that are threaded to tie rods. These mounts are primarily used in confined spaces. The lugs can also be pinned on both sides of the mount to prevent movement of the cylinder. The lugs are also strong and can be used in high-pressure environments.
Clevis mounts are also used for arcing loads. They are primarily used on shorter stroke hydraulic cylinders. They can be mounted vertically or horizontally. They are usually used with a knuckle at the rod end of a cylinder. These mounts provide a single pivot point for mounting the cylinder.
Cylinder rod end attachments should be made from spherical bearings to minimize stress on the gland and piston rod. Ideally, they should be positioned as close as possible to the shoulder faces of the trunnion. They should also be threaded to tie rods for a secure connection.
The best mounting style for a hydraulic cylinder is an intermediate fixed-trunnion mount. This type of mount is a good choice for short stroke applications.

Common hydraulic cylinder components

Whether you are looking for a new hydraulic cylinder, or you are considering upgrading the hydraulic cylinders in your current machine, you need to understand the different components of a hydraulic cylinder. Cylinders are used in a variety of applications, including construction, mining, aircraft development, metal sheet shearing, and material handling.
A hydraulic cylinder is composed of two main components. These are the piston and the piston rod. The piston rod protrudes from the cylinder barrel and is attached to the piston inside the cylinder.
A hydraulic cylinder also has seals. These are used to prevent contaminants from entering the cylinder. They are made of many different materials, depending on the application. If the hydraulic cylinder will be operating at a high temperature, it may need a seal made of Viton. In contrast, a hydraulic cylinder operating at freezing temperatures may need a polyurethane seal.
Hydraulic cylinders are also designed to withstand a large amount of force, which means that they need to be able to withstand the pressure of the system. The pressure in the system must never exceed the rated design pressure of the cylinder.
Another important component of a hydraulic cylinder is the cylinder head. It is fitted with a rod gland seal, which encloses the pressure from the other end of the cylinder barrel. A hydraulic cylinder’s head can also be fitted with a check valve, which closes when the stem is clear.
A hydraulic cylinder’s head is also fitted with a rod bearing, which supports the weight of the piston rod. The rod bearing guides the piston rod through the rod gland, and prevents hydraulic oil leakage.
A hydraulic cylinder’s rod can be made from stainless steel or carbon steel. The rod is usually coated with hard chrome plating. The rod can also be made from corrosion-resistant materials, including Inconel.hydraulic cylinders

Common causes of hydraulic cylinder drift

Having a hydraulic cylinder that drifts is not only dangerous, but it can lead to a lot of repair work and costly replacements. Luckily, you can diagnose and fix this problem by performing a few simple tests.
The first step is to ensure that the cylinder is in good working order. It should be checked for general wear, corrosion, and speed. Also, it should be checked for leaks. If there are any leaks, you should fix them right away.
Another way to determine if a cylinder is drifting is to use a pressure gauge. The gauge should be used under controlled conditions to determine if the cylinder is drifting. If the cylinder moves, the problem is likely a leak. You should also check the rod seal.
When the rod seal leaks, it allows fluid to leak outside of the cylinder system. If it does not leak, it should stick to the rod when the rod stops moving. This will prevent a cylinder from drifting and maintain pressure.
The most common cause of hydraulic cylinder drift is a leak. A leak can occur in a number of ways, including through the piston seal or a leak in the holding or pressure release valves. If the leak is in the piston seal, it can lead to a hydraulic cylinder that drifts.
Another common cause of hydraulic cylinder drift is fluid contamination. When foreign particles combine with the fluid, the density can change and oil can seep past seals.
Hydraulic cylinders can experience other issues as well. If the cylinder has an oversized piston diameter, it can cause cylinder drift. A load control valve can also be a problem.
China China factory supply long stroke multi stages lift kits hyva type hollow Telescopic Hydraulic Cylinder for dump truck hydraulic cylinders designChina China factory supply long stroke multi stages lift kits hyva type hollow Telescopic Hydraulic Cylinder for dump truck hydraulic cylinders design
editor by czh 2023-03-20

China Factory Customize Hyva Parker Style Container Truck Unloading Platform Telescopic Multi Stage Hydraulic Cylinders Long Stroke hydraulic cylinder bore size chart

Solution Description

Customize Container Truck Unloading Platform Telescopic Multi Phase Hydraulic Cylinders Prolonged Stroke
 Product Description

Customise Container Truck Unloading System Telescopic Multi Phase Hydraulic Cylinders Prolonged Stroke: Hydraulic Cylinder Assemble with imported seals kits of NOK, Hallite and other manufacturers to carry the greater seal slick and the more robust persistence.

Approach with the sophisticated technologies by CNC device equipment, automated plating and painting equipments to make certain all the components to have the lower floor roughness and the greater functionality degree.

Own innovative unique buffer unit with impartial mental house legal rights which can efficiently soak up the shock to safeguard the cylinder function smoothly and reliable in functionality.

Technical specs

 

Product Technical specs
Product Identify: Customize Container Truck Unloading Platform Telescopic Multi Stage Hydraulic Cylinders Extended Stroke
  CE,  ISO9001
Generation Capability: 200,000 pcs for every calendar year
Sample Time: 7-ten days
Brand name NOLANSE or customer’s logo
Services OEM & ODM
Piston Rod Chrome or nickel plated,floor & polished piston rod
Seal Type Parker,NOK, BUSAK SHAMBAN or as customer’s need
Tube Substantial tensile chilly drawn tube, precision honed for extended seal existence
Shipping Time Primarily based on buy quantity.  normally 15-thirty times.
Price Gain Competitive factory cost with confirmed high quality
Enterprise Variety Manufacturer & Exporter

Software

Hydraulic Cylinder Product Application

Nolanse’s top quality custom made items are developed for OEM programs in a extensive assortment
of worldwide industries, which includes producing engineering equipment, loaders hydraulic cylinders, vehicle cylinders, construction, forestry, waste management, mining, material dealing with, industrial programs, agriculture, manufacturing, transportation, marine programs and oil field products. Our achievement has been created on the engineering skills and producing abilities we provide to fulfill the very particular calls for of our business customers.

Why Pick Us

1. Solution Study & Advancement 

Nolanse builds quality goods that are created with use in head. We specialize in doing work with every client to share ideas and collect vital info concerning hydraulic cylinder suit and overall performance demands for your distinct software. This is completed by setting up a very close technical rapport with every single client and their engineering, purchasing and R&D departments – the experts in your group who know ideal what functionality, high quality, size and cylinders characteristics are crucial to your gear.  If our common strains will not fit your application, CZPT has substantial encounter in custom hydraulic cylinder patterns. We attempt to develop dynamic, revolutionary and trusted hydraulic and machining remedies that exceed your anticipations. 

 

two. Hydraulic Cylinder Production

We have the superior CNC machine tools, a horizontal machining center, a welding robotic, elements cleaning agent, automated assembly strains, automated painting tools etc. to hydraulic cylinder make sure a 360-diploma top quality control of the creation method.

three. Hydraulic Cylinder Product Testing

We examine all of the products, employing totally outfitted services and advanced instruments, with regards to the performance, composition, dimensions tolerance, roughness, hardness, force and sealing to guarantee the hydraulic cylinder high quality fulfills the demands of our distinct consumers.

four.Hydraulic Cylinder Product Certifications

Nolanse is ISO 9001 registered for the style and manufacture of hydraulic cylinders and precision machining.

5. Professional Hydraulic Cylinder Team

NOLANSE professional hydraulic cylinder team deeply understands the specifications and the technological advancement hydraulic ram. NOLANSE has been specialized in custom hydraulic cylinder development, production, product sales, sample verification, buy processing and item delivery, and many others. NOLANSE is usually doing work hard with enthusiasm to set our efforts to hydraulic cylinder technology and software.

Firm Info

As a chief in hydraulic cylinder Design, Manufacturing and Personalized Machining for in excess of 36 many years, NOLANSE has its possess above 220 staff and over fifty five,000 sq. meters manufacturing factories. We have specialist departments which includes hydraulic cylinder design, revenue, creation, good quality management office, and so forth.

NOLANSE hydraulic cylinder products mostly include manufacturing engineering machinery,loaders hydraulic cylinders,vehicle cylinders,hydraulic techniques and air managing techniques.It can also manufacture huge-scale,non-common and distinct stypes of cylinders, and so forth. All our hydraulic cylinder are manufactured from substantial good quality raw components with rigorous specialist procedure and good quality assurance. We had been labored hard and invested far more to turn out to be the leader in hydraulic cylinder industry. Our associates are people well-known hydraulic cylinder brands from America, Canada, Australia, Germany, England and other European Nations. Product high quality, shorter supply time and client gratification are our prolonged time period motivation to our around the world consumers. Hope to be your spouse.

Nolanse’s name has grow to be synonymous with high quality, on time supply and outstanding service. 
Be a part of the expanding variety of associate romantic relationship firms that have confidence in and rely on the CZPT title. 

US $566-6,999
/ Piece
| 		10 Pieces

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.

To be negotiated

###

Certification: GS, RoHS, CE, ISO9001
Pressure: High Pressure
Work Temperature: Normal Temperature

###

Samples:
US$ 1999/Piece
1 Piece(Min.Order)

|

Order Sample

Customize according to customer′s requirement

###

Customization:
Available

|

Customized Request

###

Item Specifications
Product Name: Customize Container Truck Unloading Platform Telescopic Multi Stage Hydraulic Cylinders Long Stroke
  CE,  ISO9001
Production Capacity: 200,000 pcs per year
Sample Time: 7-10 days
Brand NOLANSE or customer’s logo
Service OEM & ODM
Piston Rod Chrome or nickel plated,ground & polished piston rod
Seal Type Parker,NOK, BUSAK SHAMBAN or as customer’s requirement
Tube High tensile cold drawn tube, precision honed for extended seal life
Delivery Time Based on order quantity.  normally 15-30 days.
Price Advantage Competitive factory price with guaranteed quality
Business Type Manufacturer & Exporter
US $566-6,999
/ Piece
| 		10 Pieces

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.

To be negotiated

###

Certification: GS, RoHS, CE, ISO9001
Pressure: High Pressure
Work Temperature: Normal Temperature

###

Samples:
US$ 1999/Piece
1 Piece(Min.Order)

|

Order Sample

Customize according to customer′s requirement

###

Customization:
Available

|

Customized Request

###

Item Specifications
Product Name: Customize Container Truck Unloading Platform Telescopic Multi Stage Hydraulic Cylinders Long Stroke
  CE,  ISO9001
Production Capacity: 200,000 pcs per year
Sample Time: 7-10 days
Brand NOLANSE or customer’s logo
Service OEM & ODM
Piston Rod Chrome or nickel plated,ground & polished piston rod
Seal Type Parker,NOK, BUSAK SHAMBAN or as customer’s requirement
Tube High tensile cold drawn tube, precision honed for extended seal life
Delivery Time Based on order quantity.  normally 15-30 days.
Price Advantage Competitive factory price with guaranteed quality
Business Type Manufacturer & Exporter

Types of Hydraulic Cylinders

Besides being used for construction and manufacturing machinery, hydraulic cylinders are also used in elevators and vehicles. In fact, the use of hydraulic cylinders has become increasingly common in the recent years.hydraulic cylinders

Single-acting cylinders

Unlike double-acting hydraulic cylinders, single-acting hydraulic cylinders are less complex and are easy to install and maintain. They are also more efficient and compact. They can also be used in applications that require only one direction of motion. They are also useful in applications where space is limited, such as in a small industrial or commercial setup.
Single-acting hydraulic cylinders are usually used for simple lifting and positioning jobs. They also are useful for clamping and diagnostic instrumentation. They are cheap to manufacture and are very easy to install. They are also easy to maintain, which makes them ideal for rugged equipment.
Single-acting hydraulic cylinders are used in a variety of applications, including pumps, internal combustion engines, diagnostic instrumentation, and positioning. They have advantages and disadvantages, but they are an ideal solution for many applications.
Single-acting cylinders typically have one port, and a spring is used to force the piston into its position. The spring then retracts the piston into its previous position. This process can become irregular over time. The spring also requires venting, and can allow foreign particles to enter the cylinder.
A single-acting cylinder can also be retracted by gravity. This is called a spring return cylinder. Some single-acting cylinders have a second piston to forcefully retract the piston into its original position. This can be a problematic operation. The result can be uneven strokes.
Generally, single-acting hydraulic cylinders are not as powerful as double-acting hydraulic cylinders. They require less air, which can boost efficiency. However, their size can be a drawback. They are also susceptible to particles entering the cylinder, which can cause slow performance decline and malfunctions.
Single-acting hydraulic cylinders are ideal for applications with space constraints. They are also useful for compact operations and light assembly. They also save on piping costs. They are suitable for industrial applications such as tow trucks and bulldozers. They are also used in commercial and light industrial applications.
Single-acting hydraulic cylinders are simple to use, but may not provide the same power as double-acting cylinders. They may be less durable, and can also be subject to wear and tear, particularly in the area of retraction.

Welded body cylinders

Compared to other types of cylinders, welded body hydraulic cylinders are more compact in size and less prone to wear and tear. This type of cylinder is commonly used in construction and heavy equipment applications. These cylinders are designed for rugged environments. They are typically used in oil rigs, large off-road vehicles, and cranes.
They have less sharp corners and are easier to customize than other types of cylinders. They are also less expensive to manufacture. In addition, they can be manufactured in a variety of different materials. They are available in different lengths and thicknesses. They are also able to be fabricated using CNC turret punching and MIG welding methods. They are also available in different configurations.
They also have heavy-duty piston seals that provide consistent performance in heavy-load applications. They are also able to be used in applications with large temperature swings. They are also resistant to corrosion.
Welded body hydraulic cylinders are commonly used in mobile machinery applications. This makes them highly versatile and able to fit into tight spaces. They are also used in material handling and lift truck applications. These hydraulic cylinders are also more durable than tie rod type cylinders, which means they are less likely to fail.
They are also available in a variety of different metals. They are also available in rolled or pressed formed shapes. They can be used in press braking, shearing, and rolling structural steel. They are also available in oil and gas applications. They are also available in a variety of sizes from 3 to 169 inches in diameter.
These cylinders are designed to be durable and versatile. They are also designed to accommodate multi-stage adjustable cylinders. They are also able to accommodate custom provisions and are designed to fit into tighter machinery designs. They are also able to be manufactured in a variety of different materials, including high-strength low-alloy steel, 300 and 400 grade stainless steel, and Hastelloy(r) alloys.
They also have a smooth exterior surface. This means there are fewer sharp corners and places where moisture and dirt can settle. The cylinders also have a high level of precision tolerance, ensuring that they can handle high pressures without the metal flexing or sagging.hydraulic cylinders

Tandem cylinders

Often used in heavy industrial applications, tandem hydraulic cylinders are an important part of maintaining the functionality of heavy industrial machinery. Unlike a single cylinder, a tandem cylinder produces twice as much force. They are widely used in barges, cranes, elevated work platforms, fork lift trucks, and a number of other industrial applications.
Hydraulic cylinders are a form of power transfer system that operates on the same principle as pneumatic systems. This allows for infinitely variable force. They are also designed with locking safety mechanisms to prevent accidental damage. They are available in various materials for different applications.
Hydraulic cylinders work by using a piston rod that is thrust through an open gland at one end of the cylinder. This piston rod is then retracted when pressurised fluid bursts out of the cylinder. Its position is controlled by a seal and steel ring. These materials have been used in a variety of industries such as forestry, construction technology, and aircraft development.
Tandem hydraulic cylinders are also used in agricultural equipment such as crop sprayers. They are also used in heavy industrial machinery such as mining equipment.
These cylinders are manufactured by a number of companies including Eaton Corporation, Bosch Rexroth AG, and Caterpillar Inc. In addition, they can be customized to fit your specifications. They are also available in custom air cylinders with a minimum base material of 50,000 psi and a yield of 100,000.
There are a number of types of tandem cylinders. They can be differentiated into non-differential, double rod, balanced, cushioned, and spring return.
Cylinders in tandem typically have two chambers that are the same size. The first chamber is connected to the second cylinder by a port. The second chamber is operated by oil that is ejected from the first cylinder. This ensures that the next steering movements do not occur before the primary piston has completed its stroke.
Tandem hydraulic cylinders are easy to install and are designed to be extremely versatile. They are also extremely reliable. Pacoma is a leading provider of double acting cylinders that stand up to intense pressures. Its cylinders are designed with a solid construction and high-quality components.hydraulic cylinders

Cushioned cylinders

Typically, cushioned hydraulic cylinders are used in manufacturing equipment. They are used to reduce shock waves in the hydraulic circuit, to improve productivity and to reduce maintenance costs. They are also widely used in automobiles.
These cylinders feature a limiting device on the piston head. This device reduces excess load at the end of the outward stroke, which decreases the piston’s speed and vibration. This reduces the total working cycle time and increases productivity.
Cushioned hydraulic cylinders are made using a variety of techniques. Some are used to reduce shock waves and others are used to limit impact forces. However, these techniques do not allow for precise control over the amount of cushioning. This can lead to improper adjustment and reduced performance.
These techniques may require regular maintenance. Cushioning readjustment is often required when changing operating conditions. This can have a significant impact on a machine’s performance. For this reason, it is important to have regular preventive maintenance.
The cushioning of a cylinder is controlled through a series of valves. Each valve is located at a different point on the cylinder. This allows for an optimal cylinder adjustment that reduces oscillations and improves total working cycle time. It can also help to save energy and maintain a quiet working environment.
There are two basic types of cushioned hydraulic cylinders. The first is a spear-type design. This type of cushioning includes a sleeve or spear that enters and exits a concentric pocket. These cylinders require space in the end cap.
Another type of cushioned hydraulic cylinder is a welded cylinder. This cylinder has a piston rod ring that forms an annular restriction when the piston rod is axially moved into engagement with land. The area of the annular restriction increases as the piston moves closer to the head of the cylinder. When the piston moves in the opposite direction, the ring bypasses the annular restriction and the hydraulic fluid enters the cylinder.
When designing a hydraulic cylinder, it is important to consider the amount of cylinder pressure. This is a critical factor for selecting seals and tube wall thickness.
China Factory Customize Hyva Parker Style Container Truck Unloading Platform Telescopic Multi Stage Hydraulic Cylinders Long Stroke hydraulic cylinder bore size chartChina Factory Customize Hyva Parker Style Container Truck Unloading Platform Telescopic Multi Stage Hydraulic Cylinders Long Stroke hydraulic cylinder bore size chart
editor by czh 2022-12-17

China Hyva Binotto Penta Kind Under Body Umb Ume Micro Telescopic Hydraulic Cylinder for Small Light Duty 1 Ton 2 Ton 3 Ton 4 Ton 5 Ton Dump Truck and Tipper Trailer hydraulic cylinder bench

Product Description

micro telescopic hydraulic cylinder for dump truck and tipper trailer

 

Product Description

 

Hyva & CZPT & Custom hoist & Xihu (West Lake) Dis.r type micro telescopic hydraulic cylinder are used for Dump Truck, Tipper Truck, Trailer, Agricultural Machinery, Garbage Truck, Landing Platform etc.

Tsingshi hydraulic Customers,  MAN, JAC, VOLVO, SHACMAN, DAF, JMC,  HUNO, CIMC, SINOTRUK, TATRA,BENS,XIHU (WEST LAKE) DIS.FENG,  FOTON,etc.

1.Micro telescopic hydraulic cylinder Each stage electroplate hard chrome;
2.lighter and easier to maintenance;
3.High quality alloy seamless steel pipe have better mechanical properties;
4.The world famous brands of seals, such as HALLITE, PARKER,etc;
5.World-class processing technology ensures stable and reliable quality.

                  

NO ITEM micro telescopic hydraulic cylinder DATA
1 Material Carbon Steel, Alloy Steel, 27SiMn,45#,20#,etc
2 Honed tube 40-300mm, Heat treatment, honing, rolling
3 Honed tube 30-280mm, plated nickel or hard Chrome or ceramic
4 Seal kit Parker, Merkel, Hallite, Kaden, etc
5 Coating Sandblasting, primer paint, middle paint, finish paint,
Color can paint according to customer demands.
6 Technology Parker,custom hoist, hyco,HYVA, Meiller

SAT,DAT
7 Mounting type Pin-eye , flange, trunnion mount,ball mount, screw thread.
FC, FE, FEE, FSE,TPIN
8 Working medium Hydraulic Oil
9 Working pressure 16-20Mpa mini telescopic hydraulic cylinder
10 Temperature range -50°C to +100°C

Detailed Photos


 

Company Profile

Tsingshi hydraulic is a hydraulic telescopic cylinder for dump tipper truck company which takes up with hydraulic design, R&D, manufacturer, sell and service hydraulic products-micro telescopic hydraulic cylinder.

-micro telescopic hydraulic cylinder Certification ISO9001 TS16949, etc;
-micro telescopic hydraulic cylinder Export to North America, South America, Australia, South Korea, Southeast Asia, South Africa, Europe, Middle East, etc;
-ODM&OEM micro telescopic hydraulic cylinder according to client’s requirements;
-Professional manufacturer& supplier of micro telescopic hydraulic cylinder over 30 years;
-The micro telescopic hydraulic cylinder can be used for Dump Truck, Tipper Truck, Trailer, Agricultural Machinery, Garbage Truck,Landing Platform etc; We can produce the follow brand hydraulic cylinder. HYVA, BINOTTO, EDBRO, PENTA, MAILHOT, CUSTOM HOIST, MUNCIE, METARIS, HYDRAULEX GLOBAL, HYCO, PARKER, COMMERCIAL HYDRAULICS, MEILLER. WTJX, XT, JX, HCIC, ZX, SZ, SJ.

 

CUSTOMERS PHOTOS

 

QUALITY GUARANTEE

 

HIGH QUALITITY GUARANTEE-cylinder hydraulic telescopic for dump truck and tipper trailer
-7*24 service.
-Competitive price.
-Professional technical team.
-Perfect after-sales service system.
-ODM&OEM Hydraulic Cylinder according to customer needs.
-Strong Hydraulic Cylinder production capacity to ensure fast delivery.
-Guarantee Quality. Every process must be inspected, all products need be tested before leaving the factory.

< telescopic hydraulic cylinder Leak Test

<mini telescopic hydraulic cylinder Buffer Test

<small telescopic hydraulic cylinder Reliability Test

<micro telescopic hydraulic cylinder Full Stroke Test

<micro telescopic hydraulic cylinder Trial Operation Test

<micro telescopic hydraulic cylinder Pressure Tight Test

<micro telescopic hydraulic cylinder Load Efficiency Test
<micro telescopic hydraulic cylinder Start-up Pressure Test
<micro telescopic hydraulic cylinder Testing the Effect of Limit

SALES AND SERVICE

 



 

PRODUCTS SERIES

 

ONE WORLD ONE LOVE

 


 

 

US $300-500
/ Piece
| 		1 Piece

(Min. Order)

###

Certification: CE, ISO/Ts16949
Pressure: Medium Pressure
Work Temperature: Normal Temperature
Acting Way: Single Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type

###

Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

NO ITEM micro telescopic hydraulic cylinder DATA
1 Material Carbon Steel, Alloy Steel, 27SiMn,45#,20#,etc
2 Honed tube 40-300mm, Heat treatment, honing, rolling
3 Honed tube 30-280mm, plated nickel or hard Chrome or ceramic
4 Seal kit Parker, Merkel, Hallite, Kaden, etc
5 Coating Sandblasting, primer paint, middle paint, finish paint,
Color can paint according to customer demands.
6 Technology Parker,custom hoist, hyco,HYVA, Meiller

SAT,DAT
7 Mounting type Pin-eye , flange, trunnion mount,ball mount, screw thread.
FC, FE, FEE, FSE,TPIN
8 Working medium Hydraulic Oil
9 Working pressure 16-20Mpa mini telescopic hydraulic cylinder
10 Temperature range -50°C to +100°C
US $300-500
/ Piece
| 		1 Piece

(Min. Order)

###

Certification: CE, ISO/Ts16949
Pressure: Medium Pressure
Work Temperature: Normal Temperature
Acting Way: Single Acting
Working Method: Straight Trip
Adjusted Form: Regulated Type

###

Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

NO ITEM micro telescopic hydraulic cylinder DATA
1 Material Carbon Steel, Alloy Steel, 27SiMn,45#,20#,etc
2 Honed tube 40-300mm, Heat treatment, honing, rolling
3 Honed tube 30-280mm, plated nickel or hard Chrome or ceramic
4 Seal kit Parker, Merkel, Hallite, Kaden, etc
5 Coating Sandblasting, primer paint, middle paint, finish paint,
Color can paint according to customer demands.
6 Technology Parker,custom hoist, hyco,HYVA, Meiller

SAT,DAT
7 Mounting type Pin-eye , flange, trunnion mount,ball mount, screw thread.
FC, FE, FEE, FSE,TPIN
8 Working medium Hydraulic Oil
9 Working pressure 16-20Mpa mini telescopic hydraulic cylinder
10 Temperature range -50°C to +100°C

Buying Guide For Hydraulic Cylinders

Whether you are looking to replace a broken hydraulic cylinder or are interested in learning more about them, you will be glad to know that there are many options to choose from. The materials used to build cylinders, their stroke lengths and seals are just a few things to consider.hydraulic cylinders

‘Parallel’ vs ‘Series’ cylinders

Choosing a hydraulic cylinder that is a good fit for your application is important. In general, there are two types of hydraulic cylinders: single-rod and tandem. In tandem cylinders, the two cylinders move in unison. This is the best way to transfer energy.
A welded body hydraulic cylinder is the most common type of hydraulic cylinder. It is used in construction equipment and other heavy industries. The cylinder body is welded in place and the base end is welded to it. It is normally rated for higher pressures.
A welded body hydraulic cylinder also has a built-in directional control valve. This valve works on both the inlet and the work ports. The oil from the pump goes through the control valves in series. This type of control valve usually has a small orifice drilled into it. It creates a pressure differential that forces the cylinders to work in unison.
Another type of hydraulic cylinder is the tie rod cylinder. It has a barrel and piston rod that is mounted on the bottom of the barrel. The piston rod operates both inside the barrel and out of the barrel.
There are many other types of hydraulic cylinders. Some of the more common include the plunger type, the tie rod type, and the single rod type. There are also many other types of cylinders, but they all have one thing in common: they use hydraulic fluid to power the piston.
The best hydraulic cylinder is one that can lift its weight. It is also important to select the best size for your application. The size of the cylinder depends on the load you intend to lift. If the loads are too large, you may have a difficult time maintaining synchronization. However, if the loads are not too heavy, you may be able to achieve the desired performance.
The hydraulic series relationship is a good place to start. If the loads are evenly distributed, the cylinders will work in unison. The flow control valves are a good way to keep cylinders in sync. A pilot-operated check valve is a good choice, as it will stop oil transfer when the mid-stroke is stopped.

Stroke lengths

Regardless of whether you’re buying a hydraulic cylinder for a small engine or a large excavator, the following guide can help you determine the optimal stroke length. The length is measured in inches. This is a standard measurement and is easy to obtain. The stroke is the distance covered by the rod and piston between the fully extended height and the fully retracted height of the cylinder.
The cylinder’s stroke can be measured in one of three ways. It can be based on the diameter of the rod, the diameter of the bore, or the difference between the maximum extended length and the minimum extended length. The cylinder’s stroke can range from a fraction of an inch to several feet. The stroke is a good indicator of the length of pull that can be exerted from the piston.
The largest part of the hydraulic cylinder is the rod. It is a round chrome-plated steel bar that performs the reciprocating motion. The diameter of the rod ranges from a few inches to twenty inches. It is referred to as the shiny part of the cylinder.
The retracted length is the distance between the centers of the mounting pins when the cylinder is closed. It is a standard measurement and can be measured with a tape measure. The retracted length is important for the proper functioning of the cylinder.
Using the retracted length, calculate the cylinder’s stroke. The stroke is the distance covered by the piston and rod between the fully extended height and the fully shortened height of the cylinder. This is the best indication of the length of pull that can be exerted.
The stroke is also the best indication of the length of lift that can be exerted from the piston. It can be measured using a caliper. The caliper can be used to measure the diameter of the rod and the thickness of the piston. It can also be used to calculate the difference between the maximum extended length and the maximum retracted length. This gives you the maximum length in the retracted position.hydraulic cylinders

Materials used

Various materials are used in the manufacture of hydraulic cylinders. The materials have to be tough and durable enough to withstand the pressures of the hydraulic fluid. Besides, the materials must also be compatible with the hydraulic fluid. If the materials are not strong enough, the cylinder may not fully stroke.
Hydraulic cylinders are made of steel and other durable materials. They can be used in a variety of applications. They are used in manufacturing, construction, mining, and industrial technology. They can also be found in the aviation and aircraft industry. They have also been used in forestry.
Most hydraulic cylinders are made of 1018/1020 cold rolled steel. They are usually coated with Hard Chrome Plating to prevent corrosion. A variety of coatings are also available for cylinders.
In hydraulic systems, the fluid used is usually mineral oil or water glycol. Some cylinders also use fire resistant water glycol-based fluid. However, this type of fluid may still cause lubrication problems.
Another material used in hydraulic cylinders is stainless steel. These are generally inexpensive and easy to find. They are also environmentally friendly and work well with fuels and solvents. They are also durable in acidic environments.
Composite materials have also been used in the aerospace industry for years. They have also been used in high pressure vessels for CNG storage. They have a higher strength to weight ratio than steel. They have also been used in the automotive industry for many years.
The seal, piston, and steel ring work together to provide stability and control. They can also help ensure that the cylinder remains in place. These materials are also used for double-acting cylinders, which have ports on either side of the piston rod. The pressure on both sides of the piston rod helps control the movement of the cylinder.
Another type of cylinder is the tie rod style. This type of cylinder uses high-strength threaded steel tie rods to secure the cylinder. The tie rods stretch at high pressures, which allows the cylinder to function efficiently. The cylinders are commonly used in industrial factory applications.hydraulic cylinders

Seals

Choosing the right seals for hydraulic cylinders is crucial to the functioning of a hydraulic system. These seals are designed to protect the internal components of the cylinder from contamination and leakage. They are used in various industries, including construction, agriculture and industrial plants.
Hydraulic cylinder seals come in a variety of designs. They are used in both static and dynamic applications. They are also subjected to high temperatures and high pressures. Therefore, they must be made of the right material to withstand the tough conditions. The seals must also be able to resist the change of hydraulic fluid.
Hydraulic cylinder seals are made from materials such as PTFE, polyurethane and rubber. These materials provide a durable seal for cylinders. They are also resistant to abrasion and tearing.
Seals for hydraulic cylinders are categorized into static and dynamic designs. Static seals are typically found in round cross-sections. They are used between the piston and the cylinder pipe. They are also known as gland seals. These seals are usually attached to the cylinder pipe with a threaded connection. The gland seal usually includes a wiper ring that keeps the interior of the cylinder clean and free from contamination.
Hydraulic cylinder seals also must be able to withstand high temperatures and high pressures. They are used in a variety of applications, including logging equipment. The main sealing material for hydraulic cylinders is polyurethane.
Seals for hydraulic cylinders can be made from thermoplastic or elastomeric polymers. These materials combine the strength of plastic with the flexibility of rubber. Thermoplastic elastomers also have better elasticity, enabling them to maintain constant pressure for longer periods of time.
In dynamic sealing systems, low friction coefficients are a basic requirement. This is due to the need for maximum tightness in dynamic conditions. Seal materials must also be capable of forming a tight seal against irregular metal surfaces.
The seal material must also be able to expand rapidly to follow dimensional changes. This is important for high-pressure cylinders, as they may undergo deformation. It is also important to use a material that can withstand corrosion.
China Hyva Binotto Penta Kind Under Body Umb Ume Micro Telescopic Hydraulic Cylinder for Small Light Duty 1 Ton 2 Ton 3 Ton 4 Ton 5 Ton Dump Truck and Tipper Trailer hydraulic cylinder benchChina Hyva Binotto Penta Kind Under Body Umb Ume Micro Telescopic Hydraulic Cylinder for Small Light Duty 1 Ton 2 Ton 3 Ton 4 Ton 5 Ton Dump Truck and Tipper Trailer hydraulic cylinder bench
editor by czh 2022-12-07

China Good Quality Hyva Alpha Type Front-End Hydraulic Component Cylinder for Tipper Truck with CE Certification dieseling in hydraulic cylinders

Product Description

Product Advantage:
1.  Safer Junfu hydraulic cylinder adopts excellent structural design and new material application, which can withstand the harshest working conditions and continue to work stably without disconnection, ensuring the safety of drivers and vehicles, and creating the most valuable safety for users.
2. faster unloading
Junfu series oil cylinder adopts excellent structural design to improve the unloading speed of the oil cylinder!
3.higher lift frequency
junfu series oil cylinders are suitable for all-weather short barge and high-frequency operations, with stable performance, extremely low failure rate, increasing the number of transfers and reducing downtime!
4. Greater adaptability to the environment
junfu series oil cylinder adopts innovative sealing technology and new material application, which can adapt to the temperature range of -40~110ºC, and can achieve excellent performance in high temperature and low temperature environment operation!
5. lighter
Compared with other products of the same series, Junfu series cylinders reduce the dead weight by 15%~20%, and increase the lifting force by 10%~15%!
6. Greater lifting force
Compared with other products of the same series, the lifting force of junfu series cylinders is increased by 10%~15%. More lift, more load, more profit! Lighter dead weight, greater lifting force, more lightness!
 

+30 years experience in hydraulic parts production, Junfu is famous brand in front-end cylinders, offering an extensive catalogue from 5 to 100 ton with bespoke solution. Designed for rear-end tippers and tippers trailers,from 3 to 7 stage. Junfu brand front-end telescopic cyclinders are known for their durability, reliability in all conditions and value for money.

Certified, excellent quality management system and testing method make the product strong enough to resist all kindf of climate and environment and work stable. For now, we have the certification like CE,SGS,GB,ISO9001,AAAcertified.

Customized hydraulic solution, we can manufacture according to the technical drawing from the client or we can offer our professional suggestion or guidancefor our client according to our experience. The package can be done as the request of the clients. For now, we have export more than 15 countries like GUINEEE,USA,Australia etc wining the trust of the customer.
 

Enterprise Certificate
FAQ:
Q1: How about your cylinders compared with HYVA cylinder ?
      Our cylinders can replace HYVA cylinder well, with same technical details and mounting sizes

Q2: What’s your cylinder’s advantages ?
      The cylinders are manufactured by advanced equipments and made under strictly quality control processing.
      The steel is tempered and all raw materials are good quality from world famous companies.
      Competitive price!

Q3: When your company be established ?
      Our company be established in 2002, professional manufacturer of hydraulic cylinders more than 20 years.
      We had passed IATF 16949:2016 Quality control system, ISO9001, CE.

Q4: How about the delivery time ?
       15 days approximately.

Q5: How about the cylinder’s quality gurantee ?
      One year.

US $450-900
/ Piece
| 		1 Piece

(Min. Order)

###

Certification: GS, CE, ISO9001, IATF 16949:2016, SGS
Pressure: High Pressure
Work Temperature: Normal Temperature
Acting Way: Single Acting
Working Method: Straight Trip
Adjusted Form: Switching Type

###

Customization:
Available

|

Customized Request

US $450-900
/ Piece
| 		1 Piece

(Min. Order)

###

Certification: GS, CE, ISO9001, IATF 16949:2016, SGS
Pressure: High Pressure
Work Temperature: Normal Temperature
Acting Way: Single Acting
Working Method: Straight Trip
Adjusted Form: Switching Type

###

Customization:
Available

|

Customized Request

Types of Hydraulic Cylinders

Besides being used for construction and manufacturing machinery, hydraulic cylinders are also used in elevators and vehicles. In fact, the use of hydraulic cylinders has become increasingly common in the recent years.hydraulic cylinders

Single-acting cylinders

Unlike double-acting hydraulic cylinders, single-acting hydraulic cylinders are less complex and are easy to install and maintain. They are also more efficient and compact. They can also be used in applications that require only one direction of motion. They are also useful in applications where space is limited, such as in a small industrial or commercial setup.
Single-acting hydraulic cylinders are usually used for simple lifting and positioning jobs. They also are useful for clamping and diagnostic instrumentation. They are cheap to manufacture and are very easy to install. They are also easy to maintain, which makes them ideal for rugged equipment.
Single-acting hydraulic cylinders are used in a variety of applications, including pumps, internal combustion engines, diagnostic instrumentation, and positioning. They have advantages and disadvantages, but they are an ideal solution for many applications.
Single-acting cylinders typically have one port, and a spring is used to force the piston into its position. The spring then retracts the piston into its previous position. This process can become irregular over time. The spring also requires venting, and can allow foreign particles to enter the cylinder.
A single-acting cylinder can also be retracted by gravity. This is called a spring return cylinder. Some single-acting cylinders have a second piston to forcefully retract the piston into its original position. This can be a problematic operation. The result can be uneven strokes.
Generally, single-acting hydraulic cylinders are not as powerful as double-acting hydraulic cylinders. They require less air, which can boost efficiency. However, their size can be a drawback. They are also susceptible to particles entering the cylinder, which can cause slow performance decline and malfunctions.
Single-acting hydraulic cylinders are ideal for applications with space constraints. They are also useful for compact operations and light assembly. They also save on piping costs. They are suitable for industrial applications such as tow trucks and bulldozers. They are also used in commercial and light industrial applications.
Single-acting hydraulic cylinders are simple to use, but may not provide the same power as double-acting cylinders. They may be less durable, and can also be subject to wear and tear, particularly in the area of retraction.

Welded body cylinders

Compared to other types of cylinders, welded body hydraulic cylinders are more compact in size and less prone to wear and tear. This type of cylinder is commonly used in construction and heavy equipment applications. These cylinders are designed for rugged environments. They are typically used in oil rigs, large off-road vehicles, and cranes.
They have less sharp corners and are easier to customize than other types of cylinders. They are also less expensive to manufacture. In addition, they can be manufactured in a variety of different materials. They are available in different lengths and thicknesses. They are also able to be fabricated using CNC turret punching and MIG welding methods. They are also available in different configurations.
They also have heavy-duty piston seals that provide consistent performance in heavy-load applications. They are also able to be used in applications with large temperature swings. They are also resistant to corrosion.
Welded body hydraulic cylinders are commonly used in mobile machinery applications. This makes them highly versatile and able to fit into tight spaces. They are also used in material handling and lift truck applications. These hydraulic cylinders are also more durable than tie rod type cylinders, which means they are less likely to fail.
They are also available in a variety of different metals. They are also available in rolled or pressed formed shapes. They can be used in press braking, shearing, and rolling structural steel. They are also available in oil and gas applications. They are also available in a variety of sizes from 3 to 169 inches in diameter.
These cylinders are designed to be durable and versatile. They are also designed to accommodate multi-stage adjustable cylinders. They are also able to accommodate custom provisions and are designed to fit into tighter machinery designs. They are also able to be manufactured in a variety of different materials, including high-strength low-alloy steel, 300 and 400 grade stainless steel, and Hastelloy(r) alloys.
They also have a smooth exterior surface. This means there are fewer sharp corners and places where moisture and dirt can settle. The cylinders also have a high level of precision tolerance, ensuring that they can handle high pressures without the metal flexing or sagging.hydraulic cylinders

Tandem cylinders

Often used in heavy industrial applications, tandem hydraulic cylinders are an important part of maintaining the functionality of heavy industrial machinery. Unlike a single cylinder, a tandem cylinder produces twice as much force. They are widely used in barges, cranes, elevated work platforms, fork lift trucks, and a number of other industrial applications.
Hydraulic cylinders are a form of power transfer system that operates on the same principle as pneumatic systems. This allows for infinitely variable force. They are also designed with locking safety mechanisms to prevent accidental damage. They are available in various materials for different applications.
Hydraulic cylinders work by using a piston rod that is thrust through an open gland at one end of the cylinder. This piston rod is then retracted when pressurised fluid bursts out of the cylinder. Its position is controlled by a seal and steel ring. These materials have been used in a variety of industries such as forestry, construction technology, and aircraft development.
Tandem hydraulic cylinders are also used in agricultural equipment such as crop sprayers. They are also used in heavy industrial machinery such as mining equipment.
These cylinders are manufactured by a number of companies including Eaton Corporation, Bosch Rexroth AG, and Caterpillar Inc. In addition, they can be customized to fit your specifications. They are also available in custom air cylinders with a minimum base material of 50,000 psi and a yield of 100,000.
There are a number of types of tandem cylinders. They can be differentiated into non-differential, double rod, balanced, cushioned, and spring return.
Cylinders in tandem typically have two chambers that are the same size. The first chamber is connected to the second cylinder by a port. The second chamber is operated by oil that is ejected from the first cylinder. This ensures that the next steering movements do not occur before the primary piston has completed its stroke.
Tandem hydraulic cylinders are easy to install and are designed to be extremely versatile. They are also extremely reliable. Pacoma is a leading provider of double acting cylinders that stand up to intense pressures. Its cylinders are designed with a solid construction and high-quality components.hydraulic cylinders

Cushioned cylinders

Typically, cushioned hydraulic cylinders are used in manufacturing equipment. They are used to reduce shock waves in the hydraulic circuit, to improve productivity and to reduce maintenance costs. They are also widely used in automobiles.
These cylinders feature a limiting device on the piston head. This device reduces excess load at the end of the outward stroke, which decreases the piston’s speed and vibration. This reduces the total working cycle time and increases productivity.
Cushioned hydraulic cylinders are made using a variety of techniques. Some are used to reduce shock waves and others are used to limit impact forces. However, these techniques do not allow for precise control over the amount of cushioning. This can lead to improper adjustment and reduced performance.
These techniques may require regular maintenance. Cushioning readjustment is often required when changing operating conditions. This can have a significant impact on a machine’s performance. For this reason, it is important to have regular preventive maintenance.
The cushioning of a cylinder is controlled through a series of valves. Each valve is located at a different point on the cylinder. This allows for an optimal cylinder adjustment that reduces oscillations and improves total working cycle time. It can also help to save energy and maintain a quiet working environment.
There are two basic types of cushioned hydraulic cylinders. The first is a spear-type design. This type of cushioning includes a sleeve or spear that enters and exits a concentric pocket. These cylinders require space in the end cap.
Another type of cushioned hydraulic cylinder is a welded cylinder. This cylinder has a piston rod ring that forms an annular restriction when the piston rod is axially moved into engagement with land. The area of the annular restriction increases as the piston moves closer to the head of the cylinder. When the piston moves in the opposite direction, the ring bypasses the annular restriction and the hydraulic fluid enters the cylinder.
When designing a hydraulic cylinder, it is important to consider the amount of cylinder pressure. This is a critical factor for selecting seals and tube wall thickness.
China Good Quality Hyva Alpha Type Front-End Hydraulic Component Cylinder for Tipper Truck with CE Certification dieseling in hydraulic cylindersChina Good Quality Hyva Alpha Type Front-End Hydraulic Component Cylinder for Tipper Truck with CE Certification dieseling in hydraulic cylinders
editor by czh 2022-11-29

China China factory supply long stroke multi stages lift kits hyva hollow Telescopic Hydraulic Cylinder for dump truck hydraulic cylinders europe

Applicable Industries: Other
Weight (KG): 180
Video outgoing-inspection: Provided
Machinery Test Report: Not Available
Marketing Type: Ordinary Product
Warranty of core components: Not Available
Core Components: Pump
name: CZPT hydraulic telescopic cylinder
Acting type: single action
Structure: multi-stage
Seal: Hallite,park,etc
Brand: TSISH
Mounting Style: FC&FE&FEE
Work pressure: 16-20MPa
OEM: Yes
MOQ: 1pcs
Surface Treatment: hard chrome, zinc,copper
Packaging Details: Plywood pallet, plywood cases, steel pallet, fumigation wood pallet, fumigation wood box, etc.
Port: HangZhou port, ZheJiang port

Product Overview CZPT type hydraulic telescopic cylinderHyva & CZPT & Custom hoist & Xihu (West Lake) Dis.r type hydraulic telescopic Cylinders are used for Dump Truck, Tipper Truck, Trailer, Agricultural Machinery, Garbage Truck, Landing Platform etc. Tsingshi hydraulic Customers, SCANIA, MAN, IVECO, JAC, VOLVO, SHACMAN, DAF, JMC, RENAULT, HUNO, CIMC, SINOTRUK, TATRA,BENS,XIHU (WEST LAKE) DIS.FENG, ISUZU, FOTON. FEATURES AT A GLANCE 1.Each stage electroplate hard chrome;2.lighter and easier to maintenance;3.High quality alloy seamless steel pipe have better mechanical properties;4.The world famous brands of seals, such as HALLITE, PARKER,etc;5.World-class processing technology ensures stable and reliable quality. CZPT type CZPT type Meiller type PRODUCT SPECIFICATIONS

NoItemData
1MaterialCarbon Steel, Alloy Steel, 27SiMn,45#,20#,etc
2Honed tube40-300mm, Heat treatment, honing, rolling
3Piston rod30-280mm, plated nickel or hard Chrome or ceramic
4SealsParker, Merkel, Hallite, Kaden, etc
5CoatingSandblasting, primer paint, middle paint, finish paint,Color can paint according to customer demands.
6TechnologyParker,custom hoist, hyco,HYVA, MeillerSAT,DAT
7Mounting typePin-eye , flange, trunnion mount,ball mount, screw thread.FC, FE, FEE, FSE,TPIN
8Working mediumHydraulic Oil
9Working pressure16-20Mpa
10Temperature range-50°C to +100°C
PRODUCT CONFIGURATION Famous Brand Seal Heat Treatment T.I.G Welding Company Profile Tsingshi hydraulic is a hydraulic telescopic cylinder for dump tipper truck company which takes up with hydraulic design, R&D, manufacturer, sell and service hydraulic products-hydraulic telescopic cylinder; hollow hydraulic cylinder; CZPT hydraulic cylinder-Hydraulic Cylinders Certification ISO9001 TS16949, etc;-Export to North America, South America, Australia, South Korea, Southeast Asia, South Africa, Europe, Middle East, etc;-ODM&OEM according to client’s requirements;-Professional manufacturer& supplier of Hydraulic Cylinders over 30 years;-The Hydraulic telescopic Cylinders can be used for Dump Truck, Tipper Truck, Trailer, Agricultural Machinery, Garbage Truck,Landing Platform etc; We can produce the follow brand hydraulic cylinder. HYVA, BINOTTO, EDBRO, PENTA, MAILHOT, CUSTOM HOIST, MUNCIE, METARIS, HYDRAULEX GLOBAL, HYCO, PARKER, COMMERCIAL HYDRAULICS, MEILLER. WTJX, XT,JX, HCIC, ZX, SZ, SJ. Customer Photos Why Choose Us HIGH QUALITITY GUARANTEE-7*24 service.-Competitive price.-Professional technical team.-Perfect after-sales service system.-ODM&OEM according to customer needs.-Strong production capacity to ensure fast delivery.-Guarantee Quality. Every process must be inspected, all products need be tested before leaving the factory.<Leak Test<Buffer Test<Reliability Test<Full Stroke Test<Trial Operation Test<Pressure Tight Test<Load Efficiency Test<Start-up Pressure Test<Testing the Effect of Limit SALES AND SERVICE NETWORK

Choosing Hydraulic Cylinders

Typically, hydraulic cylinders are used in applications such as manufacturing machinery, construction equipment, and civil engineering. They are also used in elevators and other applications where the use of a mechanical actuator is necessary.hydraulic cylinders

Piston seals

Choosing the correct piston seals for hydraulic cylinders can help to ensure the proper operation of the cylinder. Seals are designed to keep fluids and contaminants from flowing across the cylinder. However, external factors can affect their performance. In order to choose the right seals, it’s important to understand the different types.
There are two basic piston seal types. One is a double acting seal that maintains pressure on both sides of the piston. The other type is a single acting seal that maintains pressure on only one side of the piston.
Double acting piston seals are typically made of a slide ring. They maintain the pressure in a hydraulic cylinder and allow the ram to move in a controlled direction. The slide ring is normally made of a plastic material. However, it is important to select a material that is suitable for the fluid pressure that is expected.
Single acting cylinder seals are designed for cylinders where one side of the piston is under high pressure and the other side is under low pressure. These seals are usually designed to provide the best sealing characteristics.
In addition to the seal, it is important to select the right guide. A guide is a metal strip or ring that keeps the piston and the piston rod radially centered in the cylinder assembly. This guide also keeps metal-to-metal contact between the two components.
For high-pressure applications, it is recommended to use piston seals made from PTFE. These seals can withstand temperatures up to 800 degrees Celsius. They have less friction than rubber seals and are also resistant to abrasion. However, they are not as durable as thermoplastic elastomers.
The seals are designed to maintain a constant pressure for a longer period of time than other materials. In addition, they are resistant to tearing, and they stand up to high use.

Coatings for hydraulic cylinders

Various coatings for hydraulic cylinders are available in the market. The main purpose of these coatings is to provide protection against physical and chemical attacks. These coatings are usually applied externally or internally.
Plasma spray is one of the most common surface modification methods. It combines flame and arc spray to deposit metallic or ceramic materials onto the surface. This process improves the operating characteristics of actuators. It is also useful in repairing damaged surfaces.
Another popular surface treatment is liquid nitrating. It produces a hard iron nitride layer that has excellent surface hardness. It also provides a good surface resistance. It can be used as a thermal barrier coating on stationary gas turbine blades.
Hard chrome over nickel coating is also a common type of coating for hydraulic cylinders. It provides good corrosion resistance and abrasion resistance. It is plated onto the surface and then polished.
Another popular surface modification method is thermal spray. It uses engineered materials to deposit metallic or ceramic materials onto the surface. It is a cost effective solution to surface enhancement. It also eliminates the need for costly replacement parts.
In addition, WC-CoCr coatings provide good wear resistance and corrosion resistance. These coatings are particularly useful for parts that are subjected to harsh working conditions.
Ceramic plating is mostly used in the aerospace and military industries. It also reduces friction and provides heat shielding. It can also be used as an alternative to hard chrome coatings.
The most important mechanical properties are the hardness, yield strength and the tensile strength. The material selection should be based on the shape and dimensions of the object being produced. This article will discuss the most commonly used materials and give an overview of the most effective surface modification methods.hydraulic cylinders

Double-acting cylinders

Basically, hydraulic cylinders are used in a variety of applications, including engineering, industrial furnaces, and lift shafts. They are also used in subsea environments, shipbuilding, and oil & gas.
A double-acting hydraulic cylinder is a type of hydraulic cylinder that combines the best features of a single-acting cylinder with some additional advantages. These benefits include higher force, greater flexibility, and more control. Double-acting hydraulic cylinders are generally used in high-powered applications, such as lift shafts, excavation equipment, and robotics. They are also used in mobile applications, such as earthmoving equipment.
The main difference between single acting and double-acting hydraulic cylinders is the way the piston is moved up and down the cylinder bore. Double-acting cylinders use hydraulic fluid to apply pressure on both sides of the piston rod.
Another advantage of double-acting hydraulic cylinders is their ability to extend and retract without the need for an external force. In contrast, single acting cylinders require an external source to move the piston.
Double-acting hydraulic cylinders are more expensive than single-acting cylinders. This is because they have a larger housing and require more dedicated maintenance. They are also more costly to buy.
However, they are also more accurate and efficient. Double-acting cylinders work faster and can be used in virtually any application. They are also better for industrial tasks, such as lifting merchandise off conveyor belts. They can also work in an angle, and they are suitable for mobile applications.
In addition to their performance, double-acting hydraulic cylinders are more likely to be ISO compliant than single-acting cylinders. They also offer more design options.
Depending on the needs of the application, a double-acting hydraulic cylinder may be more expensive than a single-acting cylinder. This is because the piston seal must be designed to work with the fluid. The seal material is generally rubber or a rubber/fabric composite.

Stainless steel cylinders

Stainless steel hydraulic cylinders are used in numerous industries. They are known for their durability and rust resistance. They are used in industrial hydraulics applications, as well as in the food and beverage processing industry. They also help processing facilities meet industry standards.
Stainless steel hydraulic cylinders are made of a stainless steel alloy that contains at least 10% chromium. The chromium oxide forms a thin layer on the steel’s surface, contributing to its corrosion resistance. The alloy also develops a non-porous surface that prevents bacteria from lingering. It also contributes to the steel’s ability to self-repair.
Stainless steel hydraulic cylinders are widely used in the food and beverage processing industry. They are particularly useful for moving heavy loads. They can withstand frequent cleaning operations. They also provide excellent strength. They are commonly used in chocolate molding machines and cold press juicers.
Stainless steel hydraulic cylinders are available from Maverick Machine & Hydraulics. They can be customized to meet your specifications. They can be manufactured with a satin finish or a streamlined design. They can also be custom colored. The manufacturer will provide full service and a competitive price.
Hydraulic cylinders are used to push, pull, or push-pull heavy loads. They are designed to withstand extreme temperatures. They are also available in single and double-acting configurations. They are commonly used in pharmaceutical, food, chemical, and marine applications. They are also used on coastal power generation plants and pipeline risers. They are also used in water treatment plants. They can also be used on oil platforms.
There are two types of hydraulic cylinders, which are single-acting and double-acting. The single-acting type has a single fluid chamber, while the double-acting model has more fluid in the pressurized chamber. The single-acting cylinder is more affordable to maintain and easier to control.hydraulic cylinders

Pivot rod style cylinders

Choosing hydraulic cylinders requires a great deal of attention to detail. You will need to consider the following factors: cylinder length, rod size, rod seals, bearing loads, and the type of cylinder you need.
Hydraulic cylinders are used in a variety of applications, such as lifting and lowering buckets, as well as jack knifing and metal sheet shearing machines. They are also used in hydraulic bending machines and earth-moving equipment.
The main sleeve or barrel of a hydraulic cylinder extends to its maximum stroke. It can be either single or double acting, and can be either stationary or pivoting. This allows a cylinder to move a load in a straight line or a circular path.
Cylinders have a variety of mounting styles, including clevises, flanges, and side mounts. Flange mounts are generally used in force-transfer applications where the cylinder must be parallel with the load. Flanges come in several shapes and sizes, including a square flange, a rectangular head, or a cap. Aside from transferring load, they also absorb force along the cylinder centerline.
Cylinders have a variety and range of seals, which are used to prevent hydraulic fluid leakage past the interface. These seals are made of various materials, including metal and elastomeric seals. The materials used for these seals depend on the application. These seals also vary in terms of pressure, temperature, and temperature changes.
Clevises and flanges are two common mounting styles for hydraulic cylinders. They are used to provide structural support for bolts. These mounts also work to absorb force along the cylinder’s centerline. These mounting styles have less rod bearing loads than other types, but they must be properly aligned with the load.
China China factory supply long stroke multi stages lift kits hyva hollow Telescopic Hydraulic Cylinder for dump truck hydraulic cylinders europeChina China factory supply long stroke multi stages lift kits hyva hollow Telescopic Hydraulic Cylinder for dump truck hydraulic cylinders europe
editor by czh