أسطوانة دلو لحفارة دوسان الكبيرة DH290

مقدمة

The bucket cylinder for Doosan large excavator DH290 is a specially designed hydraulic cylinder used to control the movement of the bucket in heavy machinery such as excavators, backhoe excavators, and front-end loaders. Its main function is to enable the bucket to lift, lower, and tilt, making it easier to handle various material handling tasks. In the hydraulic system, the bucket cylinder controls the precise movement of the bucket through changes in hydraulic oil pressure, allowing operators to efficiently handle heavy loads and adapt to complex work environments and diverse job requirements.

سمات

• قوة عالية ومتانة

  The bucket cylinder is usually made of high-strength steel or aluminum, which can withstand high pressure and heavy loads, adapt to harsh working environments, and is designed with wear resistance and corrosion resistance in mind to extend its service life.

• التشغيل الهيدروليكي الفعال

  The bucket cylinder uses hydraulic oil pressure to achieve smooth extension and contraction, responds quickly to control commands, provides powerful pushing and pulling force, and is suitable for handling heavy loads and complex job tasks.

• أنواع مختلفة

  The bucket cylinder can be selected as a single-acting (hydraulic is used in only one direction) or double-acting (hydraulic is used in both directions) cylinder according to requirements, and some models are telescopic, allowing for greater extension without increasing external dimensions, suitable for applications with limited space.

• بديل مثالي

  يمكن لمنتجنا أن يحل محل هذه الأسطوانات الهيدروليكية بشكل مثالي.

التطبيقات

تُستخدم أسطوانة الدلو على نطاق واسع في العديد من الآلات الثقيلة، بما في ذلك:

• معدات البناء

  In excavators, they are vital for digging, loading, and moving soil or debris. In backhoe excavators, the bucket cylinder helps with digging and lifting. In front-end loaders, they facilitate lifting and tilting of goods effectively.

• الآلات الزراعية

  تُستخدم في معدات التحميل الأمامية، لالتقاط ورفع ونقل التربة والقش والمواد الأخرى.

• الحفارات

  The bucket cylinder enables the bucket to penetrate the soil to achieve digging action.

اعتبارات التصميم ومعايير الاختيار

The design of the bucket cylinder considers its load-bearing capacity, sealing, durability, safety, and maintainability. The following are the key design considerations:

• القدرة على تحمل الأحمال

  The bucket cylinder is designed and manufactured to withstand the maximum force and weight required for its intended application.

• ختم

  The bucket cylinder uses various sealing components, such as piston seals, rod seals, etc., with wear-resistant materials such as polyurethane and nitrile rubber, to ensure a good seal and prevent fluid leakage.

• متانة

  The cylinder body and threaded end surface are finely processed to increase wear resistance. The bucket cylinder is also designed with corrosion-resistant materials and coatings to extend its service life.

• أمان

  The bucket cylinder is equipped with safety devices such as relief valves and overload protection to prevent injury or damage to the cylinder or machinery.

• إمكانية الصيانة

  The bucket cylinder requires regular inspection and preventive maintenance to ensure optimal performance. The hydraulic oil needs to be changed and refilled regularly, and the seal needs to be inspected and replaced if necessary.

الختم والتشحيم

The bucket cylinder uses various sealing components, such as piston seals, rod seals, etc., with wear-resistant materials such as polyurethane and nitrile rubber, to ensure a good seal and prevent fluid leakage. The cylinder body and threaded end surface are finely processed to increase wear resistance. It needs to be regularly lubricated with the appropriate amount of hydraulic oil to maintain optimal performance.

الصيانة والإصلاح

The following are some common maintenance tasks for the bucket cylinder:

• التفتيش الدوري

  The bucket cylinder needs to be regularly inspected to ensure that it is working properly and to detect potential problems early.

• تشحيم

  The bucket cylinder needs to be lubricated with the appropriate amount of hydraulic oil to maintain optimal performance.

• استبدال الختم

  The seal needs to be inspected and replaced if necessary to maintain a good seal and prevent fluid leakage.

• فحص المحاذاة

  During installation, the bucket cylinder needs to be aligned correctly to ensure that it is working properly.

Proper installation, lubrication, and adjustment are essential to ensure the longevity of the bucket cylinder. The use of appropriate installation brackets is recommended to secure the cylinder. We provide a recommended inspection, repair, and replacement procedure to extend the life of the bucket cylinder.

اعتبارات السلامة والعوامل البيئية

When using the bucket cylinder, it is essential to follow appropriate safety procedures to prevent injury or damage to the cylinder or machinery. Regular inspection, maintenance, and repair can help reduce potential environmental hazards.

استكشاف الأخطاء وإصلاحها والمشكلات الشائعة

The following are some common problems that may occur with the bucket cylinder:

• تسرب

  The cylinder may leak due to damaged seals, contaminated hydraulic oil, or loose connections.

• التشغيل البطيء

  The cylinder may operate slowly due to insufficient hydraulic oil, worn seals, or damaged rods.

• ارتفاع درجة الحرارة

  The cylinder may overheat due to low oil levels, blocked oil passages, or damaged relief valves.

To solve these problems, it is necessary to identify the cause and take appropriate corrective action, such as replacing damaged seals, cleaning the hydraulic oil, or repairing or replacing damaged parts.

معلومات عنا

Our company is a manufacturer of replacement hydraulic cylinders with a complete range of products and has become one of the leading manufacturers and wholesalers of hydraulic cylinders in the domestic and international markets. We follow the principles of excellent quality, rely on industrialized production management strategies in fine manufacturing workshops, and continuously improve our manufacturing platform, improve product quality production lines, and have a strong ability to create high-efficiency, high-precision, and high-quality products to meet the diverse needs of our customers.

الاحترافية

Our company has a team of professional technicians and engineers who have many years of experience in designing and manufacturing hydraulic cylinders and related equipment.

شهادة دولية

Our products have passed international certifications such as ISO9001, CE, and SGS, ensuring that our products meet international quality standards.

خدمات التخصيص

نقدم خدمات التخصيص للأسطوانات الهيدروليكية لتلبية الاحتياجات الخاصة لعملائنا.

معدات الإنتاج

Our company has advanced production equipment such as CNC machine tools, machining centers, and testing equipment to ensure high-quality and efficient production.

خدمة ما بعد البيع

We provide excellent after-sales service to our customers, including technical support, maintenance, and repair services.

المؤلف: ليل