{"id":1025,"date":"2023-09-07T05:53:50","date_gmt":"2023-09-07T05:53:50","guid":{"rendered":"https:\/\/hydraulic-cylinders.net\/?post_type=product&p=1025"},"modified":"2025-04-16T02:22:21","modified_gmt":"2025-04-16T02:22:21","slug":"ygd-light-rod-hydraulic-cylinder","status":"publish","type":"product","link":"https:\/\/www.hydraulic-cylinders.net\/cs\/produkt\/ygd-light-rod-hydraulic-cylinder\/","title":{"rendered":"YGD Light Rod Hydraulic Cylinder"},"content":{"rendered":"

YGD Light Rod Hydraulic Cylinder<\/strong><\/h1>\n

YGD light rod hydraulic cylinder is the company’s advantage products, manufacturing experience, mature technology, and cost-effectiveness. The cylinder of the light rod adopts a seamless steel pipe. Different working pressures allow the selection of steel tubes with different wall thicknesses. The inner diameter machining precision is high, the structure is compact, the weight is light, and the installation and connection methods are various. It has the advantages of good low-speed performance, stable buffer performance, and a pressure range of 3.5-17MPA, and it is widely used in machine tools, textiles, plastics, agricultural machinery, and equipment hydraulic systems.<\/p>\n

\"\"<\/p>\n

Technical Specification Of YGD Light Rod Hydraulic Cylinder:<\/strong><\/h2>\n

1, The use of pressure 5Mpa the following is recommended to use our factory standard low-pressure tie rod hydraulic cylinder, short processing cycle, cost-effective:
\n2. Minimum pressure: According to the specific application, a particular minimum force is required to ensure the function of the hydraulic cylinder. When there is no load, the recommended minimum pressure of a single-rod hydraulic cylinder is 1MPA.
\n3, hydraulic cylinder installation: only allow in the case of no pressure, install the hydraulic cylinder, and screw the piston rod end into the machine.
\n4, treatment agent: no special instructions; The hydraulic cylinder uses a grey primer.
\n5. Limited by stroke length, cylinder diameter, and rated working pressure, the YGD series tie rod hydraulic cylinder is usually suitable for stroke \u22641.5m, cylinder diameter \u2264250mm, and rated pressure PN\u226421MPa.
\nIf the cylinder diameter is too large, the rated pressure is too high, or the stroke is too long, it is recommended to use a welding structure;
\n1) When the rod length is too long, it is easy to deviate during installation, resulting in leakage of the cylinder end.
\n2) When the inner diameter of the cylinder is too large, or the rated pressure is too high, due to the disassembly problem of the radial size arrangement, the diameter of the tie rod is limited, resulting in the tensile stress of the tie rod may exceed the yield limit.<\/p>\n

YGD Light Rod Hydraulic Cylinder:<\/strong><\/h2>\n

(1) TB Type Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(2) TC Type Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(3) TD Type Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(4) Front Cover Rectangular Flange Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(5) Rear Cover Rectangular Flange Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(6) C Type Seat Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(7) Rear Single Earring Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(8) Rear Double Earring Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(9) Rear Earring With Spherical Bearing Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(10) Front Cover Trunnion Four Rod Hydraulic Cylinder<\/h3>\n

\"\"<\/p>\n

\"\"<\/p>\n

(11) Rear Cover Trunnion Four Rod Hydraulic Cylinder<\/h3>\n

\"\"<\/p>\n

\"\"<\/p>\n

(12) Middle Fixed Trunnion Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(13) Double Piston Rod Hydraulic Cylinder<\/h3>\n

\"\"<\/p>\n

Technical Parameter Of Light Rod Hydraulic Cylinder:<\/strong><\/h2>\n

YG C-D \/d E \u00d7 200-TB 4 1 1-y *
\nC-type :C= differential cylinder; D= constant speed cylinder
\nD\/ D – Cylinder diameter\/rod diameter
\nE – Pressure grade :C=7MPa; E = 16 mpa; D = 21 mpa
\n200 – Stroke mm
\nTB – Installation mode :TB= Pull rod extends out of front cover end; TC= pull rod extension back cover end; TD= extension at both ends of the tie rod; JJ= front cover rectangular flange; HH= rear cover rectangular flange; C= side lug (type C seat); B= posterior monaural; BB= back stud; SBd= Back earrings with spherical bearings; D= front cover trunnion; DB= rear cover trunnion; DD= middle fixed trunnion
\n4 – piston rod end mode :3= non-standard piston rod end; 4= piston rod end external thread; 9= piston rod end internal thread
\n1-oil connection mode :1= inch internal thread; 2= metric internal thread
\n1 – Oil port position (see the following figure from the piston rod end)
\n1 – Buffer position :1= buffer at both ends; 2= no rod-cavity buffer; 3= buffer with rod cavity; 4= No buffer at both ends
\nY – The length of the piston rod is measured in millimeters. Write with words. Leave this option blank<\/p>\n

\"\"<\/p>\n

Ygc Light Rod Hydraulic Cylinder Characteristics:<\/strong><\/h2>\n

\"\"<\/p>\n

Ygc Light Rod Hydraulic Cylinder Installation Method Selection Instructions:<\/strong><\/h2>\n

1, Tie rod extension mounting (TB, TC, TD) cylinders are suitable for linear force transmission applications, especially useful in the case of limited space. Cylinder head-end rod mounting is best suited for compression. When the piston rod is stretched, the installation method of the end of the cylinder head should be specified. A cylinder with a pull rod extending from both ends can be fixed to a machine component from either end, while the free end of the cylinder can support a bracket or switch.<\/p>\n

2, Fflange-mounted (JJ, HH) cylinders are also suitable for linear force transmission applications. For compression use, cylinder head installation is the most convenient. The cylinder head shall be specified to be installed where the main load causes the piston rod to be stretched.<\/p>\n

3, Mounted on the tripod (C) cylinder, does not absorb the force on its center line. As a result, the pressure the cylinder applies creates a tipping moment that attempts to flip the cylinder around the mounting bolt. Therefore, it is essential to secure the cylinder firmly to the mounting surface and guide the load effectively so that the lateral load is not applied to the rod seal and piston guide ring.<\/p>\n

4. Hinged cylinders (B, BB, SBd) can absorb the force on their center line and are applied where the machine parts move along the curve. If the bending path of the piston rod is in a plane, two modes of BB and B can be used to fix the cylinder of the earring. For uses where the piston rod will travel along a path on either side of the actual plane of motion, SBd with spherical bearings is recommended.<\/p>\n

5, Trunnion mounting (D, DB, DD) cylinders are designed to absorb the force on their center line. They are suitable for tensile (tension) or compression (thrust) purposes and can move machine members along curved paths within a single plane. The trunnion pins are designed for shear loads only and should withstand minimal bending stress.<\/p>\n

Schopnosti a kapacita tov\u00e1rny:<\/strong><\/h2>\n

(1) Mont\u00e1\u017e<\/h3>\n

Disponujeme prvot\u0159\u00eddn\u00ed nez\u00e1vislou v\u00fdzkumnou a v\u00fdvojovou mont\u00e1\u017en\u00ed platformou. D\u00edlna na v\u00fdrobu hydraulick\u00fdch v\u00e1lc\u016f m\u00e1 \u010dty\u0159i poloautomatick\u00e9 mont\u00e1\u017en\u00ed linky pro zvedac\u00ed v\u00e1lce a jednu automatickou mont\u00e1\u017en\u00ed linku pro nakl\u00e1p\u011bc\u00ed v\u00e1lce s projektovanou ro\u010dn\u00ed v\u00fdrobn\u00ed kapacitou 1 milion kus\u016f. D\u00edlna na speci\u00e1ln\u00ed v\u00e1lce je vybavena poloautomatick\u00fdm \u010distic\u00edm mont\u00e1\u017en\u00edm syst\u00e9mem s r\u016fzn\u00fdmi specifikacemi a projektovanou ro\u010dn\u00ed v\u00fdrobn\u00ed kapacitou 200 000 kus\u016f a je vybavena zn\u00e1m\u00fdm CNC obr\u00e1b\u011bc\u00edm za\u0159\u00edzen\u00edm, obr\u00e1b\u011bc\u00edm centrem, vysoce p\u0159esn\u00fdm speci\u00e1ln\u00edm za\u0159\u00edzen\u00edm pro zpracov\u00e1n\u00ed v\u00e1lc\u016f, robotick\u00fdm sva\u0159ovac\u00edm strojem, automatick\u00fdm \u010distic\u00edm strojem, automatick\u00fdm mont\u00e1\u017en\u00edm strojem pro v\u00e1lce a automatickou lakovac\u00ed v\u00fdrobn\u00ed linkou. St\u00e1vaj\u00edc\u00ed kritick\u00e9 vybaven\u00ed m\u00e1 v\u00edce ne\u017e 300 sad. Optim\u00e1ln\u00ed alokace a efektivn\u00ed vyu\u017eit\u00ed zdroj\u016f za\u0159\u00edzen\u00ed zaji\u0161\u0165uje po\u017eadavky na p\u0159esnost v\u00fdrobk\u016f a spl\u0148uje po\u017eadavky na vysokou kvalitu v\u00fdrobk\u016f.<\/p>\n

\"\" \"\"<\/p>\n

(2) Obr\u00e1b\u011bn\u00ed<\/h3>\n

Obrobna je vybavena zak\u00e1zkov\u00fdm soustru\u017enick\u00fdm centrem pro \u0161ikm\u00e9 kolejnice, obr\u00e1b\u011bc\u00edm centrem, vysokorychlostn\u00edm honovac\u00edm strojem, sva\u0159ovac\u00edm robotem a dal\u0161\u00edm souvisej\u00edc\u00edm za\u0159\u00edzen\u00edm, kter\u00e9 zvl\u00e1dne obr\u00e1b\u011bn\u00ed v\u00e1lcov\u00fdch trubek s maxim\u00e1ln\u00edm vnit\u0159n\u00edm pr\u016fm\u011brem 400 mm a maxim\u00e1ln\u00ed d\u00e9lkou 6 metr\u016f.<\/p>\n

\"\"<\/p>\n

(3) Sva\u0159ov\u00e1n\u00ed<\/h3>\n

\"\"<\/p>\n

(4) Lakov\u00e1n\u00ed a n\u00e1t\u011bry<\/h3>\n

S mal\u00fdmi a st\u0159edn\u00edmi v\u00e1lcov\u00fdmi automatick\u00fdmi linkami na nan\u00e1\u0161en\u00ed barev na vodn\u00ed b\u00e1zi, pro dosa\u017een\u00ed automatick\u00e9ho robotick\u00e9ho nakl\u00e1d\u00e1n\u00ed a vykl\u00e1d\u00e1n\u00ed a automatick\u00e9ho st\u0159\u00edk\u00e1n\u00ed, je konstruk\u010dn\u00ed kapacita 4000 kus\u016f za sm\u011bnu;
\nM\u00e1me tak\u00e9 poloautomatickou linku na v\u00fdrobu barev pro velk\u00e9 tlakov\u00e9 lahve poh\u00e1n\u011bn\u00e9 \u0159et\u011bzem s konstruk\u010dn\u00ed kapacitou 60 lahv\u00ed za sm\u011bnu.<\/p>\n

\"\" \"\"<\/p>\n

(5) Testov\u00e1n\u00ed<\/h3>\n

Disponujeme prvot\u0159\u00eddn\u00edmi inspek\u010dn\u00edmi za\u0159\u00edzen\u00edmi a zku\u0161ebn\u00edmi laborato\u0159emi, abychom zajistili, \u017ee v\u00fdkon v\u00e1lce spl\u0148uje po\u017eadavky.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

 <\/p>\n

We are one of the best heavy rod hydraulic cylinder manufacturers. We can offer comprehensive heavy rod hydraulic cylinder stock. We also provide corresponding zem\u011bd\u011blsk\u00e9 p\u0159evodovky<\/a>Na\u0161e v\u00fdrobky jsme exportovali klient\u016fm po cel\u00e9m sv\u011bt\u011b a d\u00edky vynikaj\u00edc\u00ed kvalit\u011b v\u00fdrobk\u016f a poprodejn\u00edmu servisu jsme si z\u00edskali dobrou pov\u011bst. V\u00edt\u00e1me z\u00e1kazn\u00edky doma i v zahrani\u010d\u00ed, kte\u0159\u00ed n\u00e1s kontaktuj\u00ed za \u00fa\u010delem vyjedn\u00e1v\u00e1n\u00ed obchodn\u00edch p\u0159\u00edle\u017eitost\u00ed, v\u00fdm\u011bny informac\u00ed a spolupracujte s n\u00e1mi<\/a>!<\/p>","protected":false},"excerpt":{"rendered":"

YGD Light Rod Hydraulic Cylinder YGD light rod hydraulic cylinder is the company’s advantage products, manufacturing experience, mature technology, and cost-effectiveness. The cylinder of the light rod adopts a seamless steel pipe. Different working pressures allow the selection of steel tubes with different wall thicknesses. The inner diameter machining precision is high, the structure is […]<\/p>","protected":false},"featured_media":1104,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[1376,1550,1525,1509,1386],"product_tag":[1380],"class_list":{"0":"post-1025","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-hydraulic-cylinder","7":"product_cat-double-acting-hydraulic-cylinder","8":"product_cat-machine-tool-hydraulic-cylinders","9":"product_cat-tie-rod-hydraulic-cylinder","10":"product_cat-four-rod-hydraulic-cylinder","11":"product_tag-hydraulic-cylinder","13":"first","14":"instock","15":"shipping-taxable","16":"product-type-simple"},"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/www.hydraulic-cylinders.net\/cs\/wp-json\/wp\/v2\/product\/1025","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hydraulic-cylinders.net\/cs\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.hydraulic-cylinders.net\/cs\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/cs\/wp-json\/wp\/v2\/comments?post=1025"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/cs\/wp-json\/wp\/v2\/media\/1104"}],"wp:attachment":[{"href":"https:\/\/www.hydraulic-cylinders.net\/cs\/wp-json\/wp\/v2\/media?parent=1025"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/cs\/wp-json\/wp\/v2\/product_brand?post=1025"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/cs\/wp-json\/wp\/v2\/product_cat?post=1025"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/cs\/wp-json\/wp\/v2\/product_tag?post=1025"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}