Hydraulic System For Rolling Mill

The hydraulic system for rolling mills is a cutting-edge solution designed to optimize the performance of rolling mills in the metalworking industry. This advanced hydraulic system provides enhanced control, reliability, and efficiency, making it an integral part of mill operation. From sheet metal production to heavy steel rolling, mill hydraulic systems provide operators precise control, increased productivity, and superior product quality.

Hydraulic System For Rolling Mill Parameter:

Motor Power:0.55KW
Oil Tank:60L

Beskrivelse af model for brugerdefineret hydraulisk system:

Struktur af olietank:

Rengøringsdæksel for olietank:

Brugerdefineret hydraulisk system:

(1) Vertikalt hydraulisk system

(2) Horisontalt hydraulisk system

(3) Sidemonteret hydraulisk system

The side mounting hydraulic pump station, that is, the oil pump device, is horizontally installed based on a separate tank, and the side type can be equipped with a spare pump, which is mainly used for the system with a large mailbox capacity of 250 liters and an electric power of 7.5KW or more.

Enhanced Control for Rolling Mill Operations:

• The rolling mill hydraulic system provides precise control over critical functions such as roll gap adjustment, roll bending and roll balancing.
• With its advanced control valves and hydraulic actuators, the system ensures accurate and responsive control, enabling operators to achieve the desired thickness, shape, and surface quality of rolled products.

Reliable Hydraulic Power:

• Equipped with high-performance hydraulic pumps and motors, the system provides reliable and consistent hydraulic power to drive the demanding operation of the mill.
• Hydraulic components are specially designed to withstand the heavy loads and extreme pressures encountered during the rolling mill, ensuring continuous and efficient performance.

Hvordan fungerer et hydraulisk system?

Getting water out of a tractor’s hydraulic system is crucial to prevent damage and ensure optimal performance. Here’s a step-by-step guide on how to remove water from a tractor hydraulic system:

1. Identify Drain Points:
   • Familiarize yourself with your tractor’s hydraulic system and locate the drain points. These are typically drain plugs or valves positioned at the lowest points of the system.
2. Forbered systemet:
   • Ensure that the tractor is turned off and the hydraulic system is depressurized. This is important for safety reasons.
3. Position a Drain Container:
   • Place a suitable drain container or bucket underneath the drain point to collect the drained hydraulic fluid.
4. Loosen the Drain Plug or Valve:
   • Using the appropriate wrench or tool, carefully loosen the drain plug or open the valve at the designated drain point. Loosen it enough to allow the water-contaminated hydraulic fluid to flow out.
5. Tøm hydraulikvæsken:
   • Slowly and gradually open the drain plug or valve to allow the water-contaminated hydraulic fluid to drain. The fluid may appear milky or have visible water droplets.
6. Flush with Fresh Hydraulic Fluid:
   • Once most of the water-contaminated fluid has drained, close the drain plug or valve.
   • Fill the hydraulic reservoir with fresh, clean hydraulic fluid to flush out any remaining water and contaminants from the system.
7. Operate the Hydraulic System:
   • Start the tractor and activate the hydraulic system. Engage the hydraulic functions, such as raising and lowering attachments or operating the hydraulic controls, to circulate the fresh hydraulic fluid throughout the system.
8. Repeat the Flushing Process:
   • Open the drain plug or valve again to allow the fresh hydraulic fluid to flush out any remaining water and contaminants.
   • Close the drain plug or valve once the fluid appears clean and water-free.
9. Kontroller væskeniveau:
   • Verify the hydraulic fluid level in the reservoir and top it up if necessary to maintain the recommended level.
10. Regelmæssig vedligeholdelse:
    • Monitor the hydraulic fluid regularly for signs of water contamination or other impurities. Perform routine fluid analysis to ensure the hydraulic system remains free of water and contaminants.

Fabrikkens kapacitet og kapacitet:

(1) Samling

Vi har en førsteklasses uafhængig forsknings- og udviklingsplatform til montering. Værkstedet for produktion af hydrauliske cylindre har fire halvautomatiske løftecylindermonteringslinjer og en automatisk vippecylindermonteringslinje med en designmæssig årlig produktionskapacitet på 1 million enheder. Det specielle cylinderværksted er udstyret med forskellige specifikationer for et halvautomatisk rengøringsmonteringssystem med en designmæssig årlig produktionskapacitet på 200.000 og udstyret med berømt CNC-bearbejdningsudstyr, et bearbejdningscenter, et specialudstyr til højpræcisionscylinderbearbejdning, en robotsvejsemaskine, en automatisk rengøringsmaskine, en automatisk cylindermonteringsmaskine og en automatisk malingslinje. Eksisterende kritisk udstyr på mere end 300 sæt (sæt). Optimal allokering og effektiv udnyttelse af udstyrsressourcer sikrer produkternes nøjagtighedskrav og opfylder produkternes høje kvalitetsbehov.

(2) Maskinbearbejdning

Bearbejdningsværkstedet er udstyret med et specialfremstillet drejecenter til skrå skinner, bearbejdningscenter, højhastigheds-honemaskine, svejserobot og andet relateret udstyr, der kan håndtere bearbejdning af cylinderrør med en maksimal indre diameter på 400 mm og en maksimal længde på 6 meter.

(3) Svejsning

(4) Maling og overfladebehandling

Med små og mellemstore cylindriske automatiske vandbaserede malingsbelægningslinjer, for at opnå automatisk robotpåfyldning og -aflæsning samt automatisk sprøjtning, er den designmæssige kapacitet på 4000 stykker pr. skift;
Vi har også en halvautomatisk malingsproduktionslinje til store cylindre drevet af en kabelkæde med en designkapacitet på 60 kasser pr. skift.

(5) Testning

Vi har førsteklasses inspektionsfaciliteter og testbænke for at sikre, at cylinderens ydeevne opfylder kravene.

Vi er en af ​​de bedste producenter af hydrauliske systemer. Vi kan tilbyde et omfattende udvalg af hydrauliske systemer. Vi leverer også tilsvarende landbrugsgearkasserVi har eksporteret vores produkter til kunder over hele verden og har opnået et godt omdømme på grund af vores overlegne produktkvalitet og eftersalgsservice. Vi byder kunder i ind- og udland velkommen til at kontakte os for at forhandle forretninger, udveksle information og samarbejde med os!