Standard MOB-hydraulikcylinder til let stang

MOB light rod hydraulic cylinder is composed of a front cylinder head, rear cylinder head, piston, cylinder, piston rod, four screw rods, eight locking nuts and gaskets, a piston locking nut, with the gasket, a piston rod end matching locking nut, a set of seals, rod end protective sleeve, oil plug. Since the cylinder of this series is only 7Mpa, the front and back covers are cast HT200, the piston rod is No. 45 chrome plated layer thickness 2-3 wires, the cylinder barrel is No. 20 roll tube, and the rod material is A3.

“Lamp rod hydraulic cylinder” usually refers to a special type of hydraulic cylinder that is designed to be light and compact. These cylinders are often used in applications where space is limited, or weight is limited.

Standard MOB Light Rod Hydraulic Cylinder Parameter:

Hydraulisk cylinder med let stang Karakteristika:

The main features and characteristics of a lamp pole hydraulic cylinder may include the following:

Kompakt design: The light rod hydraulic cylinder design has a small footprint and slim shape, making it suitable for narrow Spaces or applications with limited space.

Letvægtskonstruktion: These cylinders are made of lightweight materials such as aluminum or composite materials to reduce overall weight. This makes them suitable for applications where weight is a key factor, such as mobile devices or aerospace applications.

High Strength-to-weight Ratio: Despite lightweight construction, light-rod hydraulic cylinders are designed for high strength and durability. They are designed to withstand the forces and pressures associated with hydraulic operation while maintaining structural integrity.

Smooth Operation: These cylinders usually employ advanced sealing technology and precision machining to ensure smooth and reliable operation. This helps reduce friction and increase efficiency.

Custom Options: Light rod hydraulic cylinders can often be customized to meet specific application requirements. This includes options for stroke length, mounting configuration and hydraulic connections.

Hvordan skiller man en hydraulisk cylinder ad?

Taking apart a hydraulic cylinder requires caution and adherence to proper safety procedures. Here is a general step-by-step guide on how to disassemble a hydraulic cylinder:

1. Sikkerhedsforanstaltninger:
   • Ensure the hydraulic system is depressurized and the cylinder is not under any load.
   • Put on personal protective equipment such as gloves and safety goggles.
   • Have a clean workspace and necessary tools readily available.
2. Removal from the System:
   • Disconnect the hydraulic hoses or fittings from the cylinder, ensuring the system is depressurized and there is no residual pressure.
   • Remove any mounting brackets or hardware that secure the cylinder to the equipment or machinery.
3. Fastgør cylinderen:
   • Place the hydraulic cylinder in a secure position, such as a vise or cylinder holding fixture, to prevent it from rolling or moving during disassembly.
4. Remove the Rod End Cap:
   • Locate the rod end cap, which is typically situated on the opposite end of the piston rod.
   • If there are bolts or fasteners, carefully remove them using the appropriate tools.
   • Gently tap the end cap with a soft-faced mallet or use a rubber mallet to loosen it. Avoid using excessive force to prevent damage.
5. Extraction of the Piston Assembly:
   • Once the rod end cap is removed, the piston assembly should be accessible.
   • Slide or gently tap the piston assembly out of the cylinder barrel using a wooden dowel or a soft-faced mallet. Be cautious not to damage the piston or cylinder surfaces.
6. Removal of the Piston Rod:
   • With the piston assembly extracted, the piston rod will be exposed.
   • Inspect the piston rod for any retaining clips, snap rings, or other retaining mechanisms that may be holding it in place.
   • If present, carefully remove the retaining hardware using suitable tools.
   • Gently slide or tap the piston rod out of the cylinder barrel. Take care to avoid bending or damaging the rod during removal.
7. Disassembly of Additional Components:
   • Depending on the specific design of the hydraulic cylinder, there may be additional components such as seals, bearings, or wear rings.
   • Remove these components as needed for inspection, replacement, or maintenance purposes. Refer to the manufacturer’s documentation or specifications for guidance on dismantling specific parts.

Fabrikkens kapacitet og kapacitet:

(1) Samling

Vi har en førsteklasses uafhængig forsknings- og udviklingsplatform til montering. Gaffeltruckcylinderproduktionsværkstedet har fire halvautomatiske løftecylindermonteringslinjer og en automatisk vippecylindermonteringslinje med en designmæssig årlig produktionskapacitet på 1 million enheder. Det specielle cylinderværksted er udstyret med forskellige specifikationer for halvautomatisk rengøringsmonteringssystem, med en designmæssig årlig produktionskapacitet på 200.000 enheder. Det er udstyret med berømt CNC-bearbejdningsudstyr, bearbejdningscenter, specialudstyr til højpræcisionscylinderbearbejdning, robotsvejsemaskine, automatisk rengøringsmaskine, automatisk cylindermonteringsmaskine og automatisk malingsproduktionslinje. Der findes mere end 300 nøgleudstyrssæt (sæt). Optimal allokering og effektiv udnyttelse af udstyrsressourcer sikrer produkternes nøjagtighedskrav og opfylder produkternes høje kvalitetskrav.

(2) Maskinbearbejdning

Bearbejdningsværkstedet er udstyret med et specialfremstillet drejecenter til skrå skinner, bearbejdningscenter, højhastigheds-honemaskine, svejserobot og andet relateret udstyr, der kan håndtere bearbejdning af cylinderrør med en maksimal indre diameter på 400 mm og en maksimal længde på 6 meter.

(3) Svejsning

(4) Maling og overfladebehandling

Med små og mellemstore cylindrede automatiske vandbaserede malingsbelægningslinjer, for at opnå automatisk robotpålæsning og -aflæsning samt automatisk sprøjtning, er den designmæssige kapacitet på 4000 stykker pr. skift;
Vi har også en halvautomatisk produktionslinje til maling af store cylindre, drevet af en kabelkæde, med en designkapacitet på 60 kasser pr. skift.

(5) Testning

Vi har førsteklasses inspektionsfaciliteter og testbænke for at sikre, at cylinderens ydeevne opfylder kravene.

Vi er en af ​​de bedste producenter af lavtrykshydrauliske cylindre. Vi kan tilbyde et bredt lager af lavtrykshydrauliske cylindre. Vi leverer også tilsvarende landbrugsgearkasserVi har eksporteret vores produkter til kunder over hele verden og har opnået et godt ry på grund af vores overlegne produktkvalitet og eftersalgsservice. Vi byder kunder i både ind- og udland varmt velkommen til at kontakte os for at forhandle forretninger, udveksle information og samarbejde med os!