{"id":1025,"date":"2023-09-07T05:53:50","date_gmt":"2023-09-07T05:53:50","guid":{"rendered":"https:\/\/hydraulic-cylinders.net\/?post_type=product&p=1025"},"modified":"2025-04-16T02:22:21","modified_gmt":"2025-04-16T02:22:21","slug":"ygd-light-rod-hydraulic-cylinder","status":"publish","type":"product","link":"https:\/\/www.hydraulic-cylinders.net\/da\/vare\/ygd-light-rod-hydraulic-cylinder\/","title":{"rendered":"YGD letstangs hydraulisk cylinder"},"content":{"rendered":"

YGD letstangs hydraulisk cylinder<\/strong><\/h1>\n

YGD light rod hydraulic cylinder is the company’s advantage products, manufacturing experience, mature technology, and cost-effectiveness. The cylinder of the light rod adopts a seamless steel pipe. Different working pressures allow the selection of steel tubes with different wall thicknesses. The inner diameter machining precision is high, the structure is compact, the weight is light, and the installation and connection methods are various. It has the advantages of good low-speed performance, stable buffer performance, and a pressure range of 3.5-17MPA, and it is widely used in machine tools, textiles, plastics, agricultural machinery, and equipment hydraulic systems.<\/p>\n

\"\"<\/p>\n

Technical Specification Of YGD Light Rod Hydraulic Cylinder:<\/strong><\/h2>\n

1, The use of pressure 5Mpa the following is recommended to use our factory standard low-pressure tie rod hydraulic cylinder, short processing cycle, cost-effective:
\n2. Minimum pressure: According to the specific application, a particular minimum force is required to ensure the function of the hydraulic cylinder. When there is no load, the recommended minimum pressure of a single-rod hydraulic cylinder is 1MPA.
\n3, hydraulic cylinder installation: only allow in the case of no pressure, install the hydraulic cylinder, and screw the piston rod end into the machine.
\n4, treatment agent: no special instructions; The hydraulic cylinder uses a grey primer.
\n5. Limited by stroke length, cylinder diameter, and rated working pressure, the YGD series tie rod hydraulic cylinder is usually suitable for stroke \u22641.5m, cylinder diameter \u2264250mm, and rated pressure PN\u226421MPa.
\nIf the cylinder diameter is too large, the rated pressure is too high, or the stroke is too long, it is recommended to use a welding structure;
\n1) When the rod length is too long, it is easy to deviate during installation, resulting in leakage of the cylinder end.
\n2) When the inner diameter of the cylinder is too large, or the rated pressure is too high, due to the disassembly problem of the radial size arrangement, the diameter of the tie rod is limited, resulting in the tensile stress of the tie rod may exceed the yield limit.<\/p>\n

YGD Light Rod Hydraulic Cylinder:<\/strong><\/h2>\n

(1) TB Type Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(2) TC Type Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(3) TD Type Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(4) Front Cover Rectangular Flange Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(5) Rear Cover Rectangular Flange Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(6) C Type Seat Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(7) Rear Single Earring Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(8) Rear Double Earring Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(9) Rear Earring With Spherical Bearing Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(10) Front Cover Trunnion Four Rod Hydraulic Cylinder<\/h3>\n

\"\"<\/p>\n

\"\"<\/p>\n

(11) Rear Cover Trunnion Four Rod Hydraulic Cylinder<\/h3>\n

\"\"<\/p>\n

\"\"<\/p>\n

(12) Middle Fixed Trunnion Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(13) Double Piston Rod Hydraulic Cylinder<\/h3>\n

\"\"<\/p>\n

Technical Parameter Of Light Rod Hydraulic Cylinder:<\/strong><\/h2>\n

YG C-D \/d E \u00d7 200-TB 4 1 1-y *
\nC-type :C= differential cylinder; D= constant speed cylinder
\nD\/ D – Cylinder diameter\/rod diameter
\nE – Pressure grade :C=7MPa; E = 16 mpa; D = 21 mpa
\n200 – Stroke mm
\nTB – Installation mode :TB= Pull rod extends out of front cover end; TC= pull rod extension back cover end; TD= extension at both ends of the tie rod; JJ= front cover rectangular flange; HH= rear cover rectangular flange; C= side lug (type C seat); B= posterior monaural; BB= back stud; SBd= Back earrings with spherical bearings; D= front cover trunnion; DB= rear cover trunnion; DD= middle fixed trunnion
\n4 – piston rod end mode :3= non-standard piston rod end; 4= piston rod end external thread; 9= piston rod end internal thread
\n1-oil connection mode :1= inch internal thread; 2= metric internal thread
\n1 – Oil port position (see the following figure from the piston rod end)
\n1 – Buffer position :1= buffer at both ends; 2= no rod-cavity buffer; 3= buffer with rod cavity; 4= No buffer at both ends
\nY – The length of the piston rod is measured in millimeters. Write with words. Leave this option blank<\/p>\n

\"\"<\/p>\n

Ygc Light Rod Hydraulic Cylinder Characteristics:<\/strong><\/h2>\n

\"\"<\/p>\n

Ygc Light Rod Hydraulic Cylinder Installation Method Selection Instructions:<\/strong><\/h2>\n

1, Tie rod extension mounting (TB, TC, TD) cylinders are suitable for linear force transmission applications, especially useful in the case of limited space. Cylinder head-end rod mounting is best suited for compression. When the piston rod is stretched, the installation method of the end of the cylinder head should be specified. A cylinder with a pull rod extending from both ends can be fixed to a machine component from either end, while the free end of the cylinder can support a bracket or switch.<\/p>\n

2, Fflange-mounted (JJ, HH) cylinders are also suitable for linear force transmission applications. For compression use, cylinder head installation is the most convenient. The cylinder head shall be specified to be installed where the main load causes the piston rod to be stretched.<\/p>\n

3, Mounted on the tripod (C) cylinder, does not absorb the force on its center line. As a result, the pressure the cylinder applies creates a tipping moment that attempts to flip the cylinder around the mounting bolt. Therefore, it is essential to secure the cylinder firmly to the mounting surface and guide the load effectively so that the lateral load is not applied to the rod seal and piston guide ring.<\/p>\n

4. Hinged cylinders (B, BB, SBd) can absorb the force on their center line and are applied where the machine parts move along the curve. If the bending path of the piston rod is in a plane, two modes of BB and B can be used to fix the cylinder of the earring. For uses where the piston rod will travel along a path on either side of the actual plane of motion, SBd with spherical bearings is recommended.<\/p>\n

5, Trunnion mounting (D, DB, DD) cylinders are designed to absorb the force on their center line. They are suitable for tensile (tension) or compression (thrust) purposes and can move machine members along curved paths within a single plane. The trunnion pins are designed for shear loads only and should withstand minimal bending stress.<\/p>\n

Fabrikkens kapacitet og kapacitet:<\/strong><\/h2>\n

(1) Samling<\/h3>\n

Vi har en f\u00f8rsteklasses uafh\u00e6ngig forsknings- og udviklingsplatform til montering. V\u00e6rkstedet for produktion af hydrauliske cylindre har fire halvautomatiske l\u00f8ftecylindermonteringslinjer og en automatisk vippecylindermonteringslinje med en designm\u00e6ssig \u00e5rlig produktionskapacitet p\u00e5 1 million enheder. Det specielle cylinderv\u00e6rksted er udstyret med forskellige specifikationer for et halvautomatisk reng\u00f8ringsmonteringssystem med en designm\u00e6ssig \u00e5rlig produktionskapacitet p\u00e5 200.000 og udstyret med ber\u00f8mt CNC-bearbejdningsudstyr, et bearbejdningscenter, et specialudstyr til h\u00f8jpr\u00e6cisionscylinderbearbejdning, en robotsvejsemaskine, en automatisk reng\u00f8ringsmaskine, en automatisk cylindermonteringsmaskine og en automatisk malingslinje. Eksisterende kritisk udstyr p\u00e5 mere end 300 s\u00e6t (s\u00e6t). Optimal allokering og effektiv udnyttelse af udstyrsressourcer sikrer produkternes n\u00f8jagtighedskrav og opfylder produkternes h\u00f8je kvalitetsbehov.<\/p>\n

\"\" \"\"<\/p>\n

(2) Maskinbearbejdning<\/h3>\n

Bearbejdningsv\u00e6rkstedet er udstyret med et specialfremstillet drejecenter til skr\u00e5 skinner, bearbejdningscenter, h\u00f8jhastigheds-honemaskine, svejserobot og andet relateret udstyr, der kan h\u00e5ndtere bearbejdning af cylinderr\u00f8r med en maksimal indre diameter p\u00e5 400 mm og en maksimal l\u00e6ngde p\u00e5 6 meter.<\/p>\n

\"\"<\/p>\n

(3) Svejsning<\/h3>\n

\"\"<\/p>\n

(4) Maling og overfladebehandling<\/h3>\n

Med sm\u00e5 og mellemstore cylindriske automatiske vandbaserede malingsbel\u00e6gningslinjer, for at opn\u00e5 automatisk robotp\u00e5fyldning og -afl\u00e6sning samt automatisk spr\u00f8jtning, er den designm\u00e6ssige kapacitet p\u00e5 4000 stykker pr. skift;
\nVi har ogs\u00e5 en halvautomatisk malingsproduktionslinje til store cylindre drevet af en kabelk\u00e6de med en designkapacitet p\u00e5 60 kasser pr. skift.<\/p>\n

\"\" \"\"<\/p>\n

(5) Testning<\/h3>\n

Vi har f\u00f8rsteklasses inspektionsfaciliteter og testb\u00e6nke for at sikre, at cylinderens ydeevne opfylder kravene.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

 <\/p>\n

Vi er en af \u200b\u200bde bedste producenter af hydrauliske cylindre med kraftig stang. Vi kan tilbyde et omfattende lager af hydrauliske cylindre med kraftig stang. Vi leverer ogs\u00e5 tilsvarende landbrugsgearkasser<\/a>Vi har eksporteret vores produkter til kunder over hele verden og har opn\u00e5et et godt omd\u00f8mme p\u00e5 grund af vores overlegne produktkvalitet og eftersalgsservice. Vi byder kunder i ind- og udland velkommen til at kontakte os for at forhandle forretninger, udveksle information og samarbejde med os<\/a>!<\/p>","protected":false},"excerpt":{"rendered":"

YGD Light Rod Hydraulic Cylinder YGD light rod hydraulic cylinder is the company’s advantage products, manufacturing experience, mature technology, and cost-effectiveness. The cylinder of the light rod adopts a seamless steel pipe. Different working pressures allow the selection of steel tubes with different wall thicknesses. The inner diameter machining precision is high, the structure is […]<\/p>","protected":false},"featured_media":1104,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[1376,1550,1525,1509,1386],"product_tag":[1380],"class_list":{"0":"post-1025","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-hydraulic-cylinder","7":"product_cat-double-acting-hydraulic-cylinder","8":"product_cat-machine-tool-hydraulic-cylinders","9":"product_cat-tie-rod-hydraulic-cylinder","10":"product_cat-four-rod-hydraulic-cylinder","11":"product_tag-hydraulic-cylinder","13":"first","14":"instock","15":"shipping-taxable","16":"product-type-simple"},"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/www.hydraulic-cylinders.net\/da\/wp-json\/wp\/v2\/product\/1025","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hydraulic-cylinders.net\/da\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.hydraulic-cylinders.net\/da\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/da\/wp-json\/wp\/v2\/comments?post=1025"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/da\/wp-json\/wp\/v2\/media\/1104"}],"wp:attachment":[{"href":"https:\/\/www.hydraulic-cylinders.net\/da\/wp-json\/wp\/v2\/media?parent=1025"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/da\/wp-json\/wp\/v2\/product_brand?post=1025"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/da\/wp-json\/wp\/v2\/product_cat?post=1025"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/da\/wp-json\/wp\/v2\/product_tag?post=1025"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}