Cilindro hidráulico de biela pesada tipo CB

The Type CB binaural heavy rod hydraulic cylinder is a cutting-edge hydraulic element that delivers superior power, precision, and reliability in demanding industrial applications. With its innovative CB-type binaural design, robust construction, and advanced features, this hydraulic cylinder is designed to perform well in challenging conditions. Whether you need to lift, push, or pull heavy loads, the CB binaural type heavy rod hydraulic cylinder is your solution of choice for optimal performance and efficiency.

Essential Characteristics Of CB Type Binaural Type Heavy Rod Hydraulic Cylinder:

Robust Construction:  The Type CB binaural type heavy rod hydraulic cylinder has a rugged construction that allows it to withstand extreme conditions and heavy workloads. Made of high-quality materials, it offers exceptional durability, longevity, and resistance to wear. The rugged design ensures reliable performance even in harsh operating environments.

CB Type Binaural Design: The CB type binaural design of the cylinder provides enhanced stability, controlled movement, and precise positioning. With two parallel rods extending from either side of the cylinder, it ensures balanced force distribution and minimizes deflection during operation. This design feature results in improved accuracy and efficiency.

Heavy Rod Capability:  The cylinder’s CB type binaural design provides enhanced stability, controlled motion, and precise positioning. Two parallel rods extend from both sides of the cylinder, ensuring a balanced distribution of forces and minimizing deflection during operation. This design feature improves accuracy and efficiency.

CB Type Binaural Type Heavy Rod Hydraulic Cylinder Parameter:

CB Type Binaural Type Heavy Rod Hydraulic Cylinder Usage Method:

Mounting:  First, safely install the two-axle heavy-rod hydraulic cylinder using appropriate mounting brackets or fixtures. Ensure proper alignment and stability during installation to prevent cylinder misalignment or excessive stress.

Hydraulic System Integration:  Connect the hydraulic lines to the cylinder’s ports, following the manufacturer’s instructions and guidelines. Integrate the cylinder into the hydraulic system by connecting it to a suitable pump or power unit. Ensure compatibility with the cylinder’s specifications and operating requirements.

Control and Operation:  The control valve in the hydraulic system regulates the flow of hydraulic oil into and out of the cylinder. Adjust the control Settings according to the desired linear motion and force output. Test the movement of the cylinder to verify its function and responsiveness.

CB Type Binaural Type Heavy Rod Hydraulic Cylinder Maintenance:

Regular maintenance is essential to ensure optimal performance and longevity of the Biaxial Type Heavy Rod Hydraulic Cylinder. Follow these maintenance guidelines:

Regular Inspection: Conduct routine inspections to identify signs of wear, damage, or leaks. Inspect the cylinder body, piston rod, seals, and other components for abnormalities. Address any issues promptly to prevent further injury or operational inefficiencies.

Lubrication:  Apply the recommended lubricant to the moving parts of the cylinder, including tie rods and seals. Regular lubrication minimizes friction, reduces wear, and ensures smooth operation. Use the appropriate lubricant type according to the manufacturer’s lubrication interval guidelines.

Seal Replacement: If you notice seal deterioration or leakage, replace the seals using genuine manufacturer-approved parts. Damaged or worn seals can compromise the cylinder’s performance and may lead to hydraulic fluid leaks.

Cleaning:  Remove dirt, debris, and other contaminants and keep cylinders clean. Before reassembling, use a non-abrasive cleaner and make sure all parts are arid. Regular cleaning promotes optimal performance and prevents premature wear or damage.

How To Rebuild Hydraulic Cylinder Diagram？

Rebuilding a hydraulic cylinder involves disassembling the cylinder, inspecting its components, replacing worn or damaged parts, and reassembling the cylinder. While it is difficult to provide an interactive diagram, I can provide you with a step-by-step guide on how to rebuild a hydraulic cylinder:

1. Gather Tools and Materials:
   • Wrenches or socket set
   • Hydraulic cylinder rebuild kit (includes seals, O-rings, and other necessary components)
   • Cleaning solvent
   • Lubricating oil or hydraulic fluid
   • Soft mallet or hammer
   • Bench vise (optional)
   • Safety goggles and gloves
2. Cylinder Disassembly:
   a. Ensure the hydraulic system is depressurized and the cylinder is in a safe position.
   b. Remove any mounting brackets or fixtures securing the cylinder to the equipment.
   c. Locate and remove the retaining bolts or pins holding the cylinder’s end caps.
   d. Gently tap the end cap with a soft mallet or hammer to dislodge it from the cylinder.
   e. Once the end cap is removed, carefully pull out the piston assembly, taking note of its orientation and any seals that may come with it.
   f. Repeat the process for the other end cap, if applicable.
3. Component Inspection:
   a. Inspect the cylinder barrel for signs of scoring, pitting, or other damage. The cylinder barrel may need to be replaced if significant damage is present.
   b. Examine the piston and rod for wear, scoring, or bent sections. If necessary, replace the piston or rod.
   c. Check the seals and O-rings for wear, cracks, or damage. Replace any seals that show signs of deterioration.
4. Cleaning:
   a. Clean all disassembled components using a suitable cleaning solvent to remove dirt, debris, and old lubricant.
   b. Use a soft cloth or brush to remove any stubborn residues.
   c. Ensure all components are thoroughly dried before proceeding.
5. Reassembly:
   a. Apply a small amount of lubricating oil or hydraulic fluid to the new seals and O-rings to ease installation.
   b. Install the new seals and O-rings onto the piston and end caps, ensuring they are properly seated.
   c. Carefully insert the piston assembly back into the cylinder barrel, aligning it with the rod and seals.
   d. Securely attach the end caps to the cylinder barrel using the retaining bolts or pins.
   e. Tighten the bolts or pins to the manufacturer’s specified torque settings.
   f. Check the movement of the piston and rod to ensure smooth operation.
6. Cylinder Testing:
   a. Reinstall the hydraulic cylinder onto the equipment, following the manufacturer’s guidelines.
   b. Restore hydraulic pressure to the system and test the cylinder’s functionality.
   c. Monitor for any leaks, abnormal noises, or irregular movements.
   d. Make any necessary adjustments or repairs before returning the equipment to regular operation.

Capacidad de la fábrica:

(1) Montaje

We have a first-class independent research and development assembly platform. The hydraulic cylinder production workshop has four semi-automatic lifting cylinder assembly lines and one automatic tilt cylinder assembly line, with a designed annual production capacity of 1 million pieces. The special cylinder workshop is equipped with various specifications of a semi-automatic cleaning assembly system with a designed annual production capacity of 200,000 and equipped with famous CNC machining equipment, a machining center, a high-precision cylinder processing special equipment, a robot welding machine, an automatic cleaning machine, automatic cylinder assembly machine, and automatic painting production line. Existing critical equipment of more than 300 sets (sets). The optimal allocation and efficient use of equipment resources ensure the accuracy requirements of products and meet the high-quality needs of products.

(2) Mecanizado

El taller de mecanizado está equipado con un centro de torneado de carril inclinado personalizado, un centro de mecanizado, una máquina de bruñido de alta velocidad, un robot de soldadura y otros equipos relacionados, que pueden procesar tubos cilíndricos con un diámetro interior máximo de 400 mm y una longitud máxima de 6 metros.

(3) Soldadura

(4) Pintura y revestimiento

Con pequeñas y medianas líneas de cilindros automáticos de recubrimiento de pintura a base de agua, para lograr la carga y descarga automática de robots y pulverización automática, la capacidad de diseño de 4000 piezas por turno;
También disponemos de una línea semiautomática de producción de pintura para grandes cilindros accionada por cadena, con una capacidad de diseño de 60 cajas por turno.

(5) Pruebas

Disponemos de instalaciones de inspección y bancos de pruebas de primera clase para garantizar que el rendimiento del cilindro cumple los requisitos.

We are one of the best heavy rod hydraulic cylinder manufacturers. We can offer wide heavy rod hydraulic cylinder stock. We also provide corresponding cajas de cambios agrícolas. Hemos exportado nuestros productos a clientes de todo el mundo y nos hemos ganado una buena reputación gracias a la calidad superior de nuestros productos y a nuestro servicio posventa. Invitamos cordialmente a los clientes nacionales y extranjeros a ponerse en contacto con nosotros para negociar negocios, intercambiar información y... colabore con nosotros!