30SD10-25 solenoidne suunaventiil
The 30sd10-25 solenoid directional valve is an advanced industrial component designed to optimize fluid control in various applications. With its exceptional features, precise functionality, and reliable performance, this solenoid directional valve offers efficient fluid control, contributing to enhanced productivity and operational efficiency.
The 30sd10-25 solenoid directional valve is a reliable and versatile component that optimizes fluid control in industrial applications. With its robust construction, versatile functionality, precise control, and reliable performance, this solenoid directional valve improves efficiency and productivity. By following proper usage methods and conducting routine maintenance, you can maximize the performance and longevity of this essential equipment. Incorporate the 30sd10-25 solenoid directional valve into your industrial systems to achieve accurate fluid control, streamline operations, and enhance overall productivity.
30SD10-25 Solenoid Directional Valve Characteristics:
- Robust Construction: The 30sd10-25 solenoid directional valve is fully designed, utilizing high-quality materials and meticulous engineering. Its sturdy construction ensures durability and longevity, even in challenging industrial environments.
- Versatile Functionality: This solenoid directional valve provides versatile functionality, making it suitable for various applications. It effectively controls the direction of fluid flow, allowing precise and efficient operation in diverse industrial systems.
- Precise Control: With exceptional precision, the 30sd10-25 solenoid directional valve delivers accurate control over fluid flow. It enables special regulation and adjustment of fluid direction and pressure, optimizing overall performance and efficiency in industrial processes.
- Reliable Performance: This solenoid directional valve offers reliable performance, ensuring consistent and repeatable results. Its dependable operation enhances productivity and minimizes the risk of system failures or interruptions.
30SD10-25 Solenoid Directional Valve Parameter:
| Nimirõhk | 207 baari (3000 psi) | |
| Tõestusrõhk | 350 bar (5075 psi) | |
| Tippvool | Inlet at port ①：18.9/5 Inlet at port ②：22.7/6 |
|
| Sisemine leke | ≤ 82 ml/min @207 bar | |
| Mähise töömaht | Pidev nimipinge vahemikus 85% kuni 115% | |
| Response time | First indication of change of state with 100% voltage supplied at 80% of nominal flow rating: Energized 60 msec.; De-energized 60 msec. | |
| Esialgne mähise voolutugevus 20 ℃ juures | E-mähis | 1,7 A 12 V alalisvoolu korral; 0,85 A 24 V alalisvoolu korral |
| D-mähis | 1,67 A 12 V alalisvoolu juures; 0,83 A 24 V alalisvoolu juures | |
| Minimaalne sissetõmbepinge | 85% nimiväärtusest rõhul 207 baari (3000 psi) | |
| Õõnsus | VC10-2 | |
| Vedelik | Mineraal- või sünteetilised õlid määrdeomadustega | |
| Vedeliku temperatuurivahemik ℃ | -54 kuni 107 ℃ (polüuretaanist tihendid) | |
| -40 kuni 100 ℃ (Buna N tihendid) | ||
| -26 kuni 204 ℃ (fluorosüsiniktihendid) | ||
| Viskoossusvahemik | 7,4 kuni 420 mm2/s | |
| Saastumise aste | Minimaalne saastetase on ISO4406 tase 20/18/14 ja kasutusea pikendamiseks on soovitatav tase 17/15/13. | |
30SD10-25 Solenoid Directional Valve Advantages:
• Pideva töörežiimiga mähis
• Mõlemad pordid võivad olla täielikult rõhu all
• Tõhus märgarmatuuri konstruktsioon
• Padrunid on pinge järgi vahetatavad
• Valikulised veekindlad E-mähised kuni IP69K kaitseklassiga
• Tööstusharu ühine õõnsus
• Karastatud osad pika eluea ja vähese lekke tagamiseks
Usage Method Of 30SD10-25 Solenoid Directional Valve:
- System Integration: Integrate the 30sd10-25 solenoid directional valve into the fluid control system by following the manufacturer’s guidelines and specifications. Ensure proper alignment and connection between the valve and other system components for optimal performance.
- Electrical Connection: Establish a secure electrical connection for the solenoid directional valve. Consult the provided wiring diagram and ensure correct polarity to prevent electrical malfunctions. Adhere to safety guidelines while working with electrical connections.
- Fluid Flow Direction Control: Adjust the solenoid directional valve to control the direction of fluid flow. The valve typically features a lever or actuator that allows for manual adjustment. Alternatively, it can be integrated into an automated control system for remote operation.
- Pressure Adjustment: Utilize the solenoid directional valve to regulate fluid pressure within the system. Adjusting the valve’s settings allows you to achieve the desired pressure levels for optimal performance and efficiency.
How To Change Moen Shower Valve Cartridge?
Changing the Moen shower valve cartridge is a relatively straightforward process that can be completed with a few basic tools. Follow the step-by-step instructions below to replace the cartridge:
- Gather The Necessary Tools: You will need an adjustable wrench, pliers, a screwdriver (Phillips or flat-head), and a Moen cartridge puller tool (if required) for this task.
- Lülitage veevarustus välja: Locate the main water shut-off valve for your home and turn it off to cut off the water supply to the shower. This step is crucial to prevent water from flowing when you remove the cartridge.
- Remove The Handle And Trim: Start by removing the handle of the shower valve. Look for a screw or set screw on the handle and use a screwdriver or Allen wrench to loosen and remove it. Once the screw is removed, gently pull the handle away from the valve to expose the cartridge. If there is a trim plate covering the valve, remove it as well.
- Remove The Cartridge Retaining Clip: Depending on the Moen shower valve model, there may be a retaining clip securing the cartridge in place. Locate the clip and use pliers to carefully remove it. Be cautious not to damage the clip during removal.
- Pull Out The Cartridge: With the retaining clip removed, you can now pull the cartridge straight out from the valve body. Moen cartridges can be stubborn, so you may need to use a Moen cartridge puller tool to help with extraction. Follow the tool’s instructions to attach it to the cartridge and pull it out.
- Uue kasseti paigaldamine: Take the new Moen shower valve cartridge and align it with the valve body. Make sure it is inserted straight and fully seated. Apply gentle pressure to push it into place until it is firmly positioned.
- Uue kasseti paigaldamine: Once the new cartridge is in place, reattach the retaining clip to secure it. Ensure the clip is properly engaged and holds the cartridge securely.
- Reinstall The Handle And Trim: Slide the shower handle back onto the valve stem and tighten the screw or set screw to secure it in place. If you removed a trim plate, reinstall it as well.
- Lülitage veevarustus sisse: Return to the main water shut-off valve and turn it back on to restore the water supply to the shower.
- Check For Leaks: Turn on the shower and let the water flow to check for any leaks around the valve. If you notice any leaks, tighten the connections or consider replacing any worn-out seals or gaskets.
Tehase võimekus ja suutlikkus:
(1) Kokkupanek
Meil on esmaklassiline sõltumatu teadus- ja arendustegevuse montaažiplatvorm. Hüdrosilindrite tootmistöökojas on neli poolautomaatset tõstesilindrite koosteliini ja üks automaatne kallutussilindrite koosteliin, mille kavandatud aastane tootmisvõimsus on 1 miljon tükki. Spetsiaalsete silindrite töökoda on varustatud erinevate spetsifikatsioonidega poolautomaatse puhastusmontaažisüsteemiga, mille kavandatud aastane tootmisvõimsus on 200 000 ja mis on varustatud kuulsate CNC-töötlemisseadmete, mehaanilise töötlemise keskuse, suure täpsusega silindrite töötlemise eriseadmete, robotkeevitusmasina, automaatse puhastusmasina, automaatse silindri kokkupanemise masina ja automaatse värvimise tootmisliiniga. Olemasolevad kriitilised seadmed rohkem kui 300 komplekti (komplekti). Seadmete ressursside optimaalne jaotamine ja tõhus kasutamine tagavad toodete täpsusnõuded ja vastavad toodete kvaliteedinõuetele.
(2) Töötlemine
Töödeldav töökoda on varustatud kohandatud kallutatud rööpse treipingi keskuse, mehaanilise keskuse, kiire lihvimismasina, keevitusroboti ja muude seotud seadmetega, mis suudavad töödelda silindritorusid, mille maksimaalne siseläbimõõt on 400 mm ja maksimaalne pikkus on 6 meetrit.
(3) Keevitamine
(4) Värvimine ja katmine
Väikese ja keskmise suurusega silindri automaatse veepõhise värvipinnakattega liinide abil, et saavutada automaatne robotlaadimine ja mahalaadimine ning automaatne pihustamine, projekteerimisvõimsus 4000 tükki vahetuse kohta;
Meil on ka poolautomaatne suurte balloonide värvimise tootmisliin, mis töötab jõukettaga ja mille projekteerimisvõimsus on 60 kasti ühe vahetuse kohta.
(5) Testimine
Meil on esmaklassilised kontrolliseadmed ja katsestendid, et tagada silindri jõudlus vastavus nõuetele.
Oleme üks parimaid hüdrosilindrite tootjaid. Pakume laia valikut hüdrosilindreid. Pakume ka vastavaid... põllumajanduslikud käigukastid. Oleme eksportinud oma tooteid klientidele üle maailma ja teeninud hea maine tänu meie suurepärasele tootekvaliteedile ja müügijärgsele teenindusele. Me tervitame kliente kodus ja välismaal, et võtta meiega ühendust, et pidada läbirääkimisi äri, vahetada teavet ja teha meiega koostööd!