DBET(E) SeriesProportional Pressure Relief Valve

The DBET(E) series proportional pressure relief valve is a state-of-the-art hydraulic component designed to provide precise and efficient pressure control in various industrial applications. With its advanced features, superior control capabilities, and reliable performance, this valve is an excellent choice for optimizing system performance.

The DBET(E) series proportional pressure relief valve offers exceptional control and performance optimization for hydraulic systems. With its proportional control, pressure relief function, high flow capacity, and fast response time, this valve provides precise pressure regulation and system protection. By following the recommended usage methods and maintenance guidelines, you can harness the full potential of this valve and achieve enhanced performance in your hydraulic applications. Upgrade your hydraulic system today with the DBET(E) series proportional pressure relief valve and experience optimal control and efficiency like never before.

DBET(E) SeriesProportional Pressure Relief Valve Key Characteristics:

1. Proportional Control:

• The DBET(E) series valve offers proportional control, allowing for precise adjustment of pressure levels.
• This proportional control capability ensures accurate pressure regulation based on specific system requirements, enhancing performance and efficiency.

2. Pressure Relief Function:

• With its pressure relief functionality, this valve protects hydraulic systems from excessive pressure by diverting excess flow.
• The pressure relief feature ensures system safety, preventing component damage and ensuring reliable operation.

3. High Flow Capacity:

• The DBET(E) series valve is designed to handle high flow rates, making it suitable for applications that require substantial fluid volumes.
• Its high flow capacity enables efficient operation even in demanding industrial environments.

4. Fast Response Time:

• This valve boasts a fast response time, allowing for quick adjustments to pressure changes in the system.
• The rapid response ensures precise control and minimizes pressure fluctuations, contributing to stable and consistent system performance.

DBET(E) SeriesProportional Pressure Relief Valve Parameter:

DBET(E) SeriesProportional Pressure Relief Valve Advantages:

• Direct, to restrict system pressure
• Installation face follows ISO 4401-03-02-0-05
• Five pressure ranges
• Accompanying electronic amplifier VT-2000 or plugin amplifier VT-SSPA1-…-L2X (separate order)

Usage Method Of DBET(E) SeriesProportional Pressure Relief Valve :

1. System Evaluation:

• Evaluate your hydraulic system requirements, considering factors such as flow rate, pressure range, and system dynamics.
• Determine if the proportional pressure control offered by the DBET(E) Series Valve aligns with your system’s needs.

2. Valve Selection:

• Select the appropriate variant of the DBET(E) series valve based on your system parameters and performance requirements.
• Consider factors such as flow capacity, pressure range, and electrical control options to ensure optimal compatibility and functionality.

3. Installation:

• Follow the manufacturer’s installation instructions carefully to ensure proper placement and secure mounting of the valve.
• Ensure that the valve is correctly positioned within the hydraulic system, considering factors such as fluid flow direction and accessibility for maintenance.

4. Electrical Connections:

• Connect the electrical wiring to the valve’s control terminals according to the manufacturer’s guidelines.
• Ensure that the electrical connections are secure and properly insulated to prevent any electrical faults or malfunctions.

5. Calibration and Adjustment:

• Calibrate and adjust the valve’s proportional control parameters, such as gain and offset, as per the manufacturer’s specifications.
• Fine-tune the valve settings to achieve the desired pressure control and system performance.

How To Replace Shower Valve Cartridge?

Replacing a shower valve cartridge is a common maintenance task that can restore proper functioning to your shower. Follow the step-by-step instructions below to successfully replace a shower valve cartridge:

1. Gather The Necessary Tools And Materials:
   • Replacement shower valve cartridge
   • Adjustable wrench or pliers
   • Screwdriver (Phillips or flathead, depending on your specific shower valve)
   • Plumbing grease or lubricant
   • Towels or rags to catch any water or debris
2. Turn Off The Water Supply:
   • Locate the main water shut-off valve for your home and turn it off to stop the water supply to the shower.
   • Open the shower faucet to drain any remaining water in the pipes.
3. Remove The Handle:
   • Depending on the type of shower handle you have, you may need to remove a decorative cap or cover to access the handle screw.
   • Use a screwdriver to remove the screw holding the handle in place.
   • Gently pull the handle away from the wall to detach it from the valve.
4. Remove The Trim Plate Or Escutcheon:
   • The trim plate covers the valve assembly and is usually held in place by screws.
   • Unscrew and remove the trim plate to expose the valve cartridge.
5. Remove The Old Cartridge:
   • Look for a retaining nut or clip securing the cartridge in place.
   • Use pliers or an adjustable wrench to loosen and remove the retaining nut or clip.
   • Once the retaining mechanism is removed, carefully pull the old cartridge straight out of the valve body.
   • Note the orientation of the cartridge for proper installation of the replacement.
6. Install The New Cartridge:
   • Apply a thin layer of plumbing grease or lubricant to the o-rings of the new cartridge to ensure smooth operation.
   • Insert the new cartridge into the valve body, aligning it with the same orientation as the old cartridge.
   • Firmly push the new cartridge into place until it is fully seated.
7. Reassemble The Valve:
   • Replace the retaining nut or clip to secure the new cartridge in place.
   • Reattach the trim plate or escutcheon and tighten the screws to hold it securely.
   • Slide the shower handle back onto the valve stem and tighten the handle screw to secure it.
8. Turn on the water supply:
   • Slowly turn on the main water supply valve for your home to allow water to flow back into the shower.
   • Check for any leaks around the valve and handle. If you notice any leaks, tighten the necessary connections or seek professional assistance.
9. Test The Shower:
   • Turn on the shower and check for proper water flow and temperature control.
   • Adjust the handle as needed to achieve the desired water temperature and flow.

Tehase võimekus ja suutlikkus:

(1) Kokkupanek

Meil on esmaklassiline sõltumatu teadus- ja arendustegevuse montaažiplatvorm. Hüdrosilindrite tootmistöökojas on neli poolautomaatset tõstesilindrite koosteliini ja üks automaatne kallutussilindrite koosteliin, mille kavandatud aastane tootmisvõimsus on 1 miljon tükki. Spetsiaalsete silindrite töökoda on varustatud erinevate spetsifikatsioonidega poolautomaatse puhastusmontaažisüsteemiga, mille kavandatud aastane tootmisvõimsus on 200 000 ja mis on varustatud kuulsate CNC-töötlemisseadmete, mehaanilise töötlemise keskuse, suure täpsusega silindrite töötlemise eriseadmete, robotkeevitusmasina, automaatse puhastusmasina, automaatse silindri kokkupanemise masina ja automaatse värvimise tootmisliiniga. Olemasolevad kriitilised seadmed rohkem kui 300 komplekti (komplekti). Seadmete ressursside optimaalne jaotamine ja tõhus kasutamine tagavad toodete täpsusnõuded ja vastavad toodete kvaliteedinõuetele.

(2) Töötlemine

Töödeldav töökoda on varustatud kohandatud kallutatud rööpse treipingi keskuse, mehaanilise keskuse, kiire lihvimismasina, keevitusroboti ja muude seotud seadmetega, mis suudavad töödelda silindritorusid, mille maksimaalne siseläbimõõt on 400 mm ja maksimaalne pikkus on 6 meetrit.

(3) Keevitamine

(4) Värvimine ja katmine

Väikese ja keskmise suurusega silindri automaatse veepõhise värvipinnakattega liinide abil, et saavutada automaatne robotlaadimine ja mahalaadimine ning automaatne pihustamine, projekteerimisvõimsus 4000 tükki vahetuse kohta;
Meil on ka poolautomaatne suurte balloonide värvimise tootmisliin, mis töötab jõukettaga ja mille projekteerimisvõimsus on 60 kasti ühe vahetuse kohta.

(5) Testimine

Meil on esmaklassilised kontrolliseadmed ja katsestendid, et tagada silindri jõudlus vastavus nõuetele.

We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding põllumajanduslikud käigukastid. Oleme eksportinud oma tooteid klientidele üle maailma ja teeninud hea maine tänu meie suurepärasele tootekvaliteedile ja müügijärgsele teenindusele. Me tervitame kliente kodus ja välismaal, et võtta meiega ühendust, et pidada läbirääkimisi äri, vahetada teavet ja teha meiega koostööd!