Valitse sivu

Takakansi Nelivarsinen nelivarsinen hydraulisylinteri

Yhtenä hydraulisylinterien valmistajista, toimittajista ja mekaanisten tuotteiden viejistä tarjoamme hydraulisylintereitä ja monia muita tuotteita.

Ota yhteyttä meihin saadaksesi lisätietoja.

Posti:sales@hydraulic-cylinders.net

Valmistaja toimittaja viejä hydraulisylinterit.

Takakansi Nelivarsinen nelivarsinen hydraulisylinteri

The rear cover trunnion four rod hydraulic cylinder is a cutting-edge component designed to provide exceptional power, precise control, and unmatched performance in various industrial applications. With its innovative rear cover trunnion design and four rod configuration, this four rod hydraulic cylinder offers enhanced stability, durability, and load-bearing capacity, making it an indispensable asset in demanding hydraulic systems.

Neljän sauvan hydraulisen sylinterin olennaiset ominaisuudet:

Rear Cover Trunnion Design:

    • The rear cover trunnion design provides a safe and efficient installation solution that ensures reliable operation even under heavy loads and extreme conditions.
    • It simplifies installation and can be easily integrated into various hydraulic systems or equipment.

Four Rod Configuration:

    • The four rod configuration enhances the bearing capacity of the four rod hydraulic cylinder and ensures optimal stability and precise positioning.
    • It enables the four rod hydraulic cylinder to withstand side loads effectively, providing exceptional resistance to torsion and side forces.

Suuri teho:

    • This four rod hydraulic cylinder has an impressive power output, allowing it to handle heavy loads easily.
    • It provides superior power and thrust, making it suitable for applications that require a lot of strength and lifting capacity.

Precise Control:

    • The rear cover trunnion four rod hydraulic cylinder provides precise linear motion control to ensure accurate positioning and smooth operation.
    • Se tarjoaa erinomaisen iskunhallinnan, jonka ansiosta käyttäjät voivat saavuttaa erityistehtävissä tarvittavan nopeuden ja tarkkuuden.

Rear Cover Trunnion Four Rod Hydraulic Cylinder Parameter:

Takakansi Nelivarsinen nelivarsinen hydraulisylinteri Käyttömenetelmä:

Asennus ja asennus:

    • Ota huomioon kuormitusvaatimukset ja tilarajoitukset määrittääksesi hydraulisylinterin sopivan asennuspaikan järjestelmässä tai laitteistossa.
    • Varmista, että asennuspinta on puhdas ja tasainen ja että se kestää sylinterin painon.
    • Place the rear cover trunnions flush with the mounting face and secure them using recommended bolts or fasteners.

Hydrauliset liitännät:

    • Connect the four rod hydraulic cylinder supply line to the cylinder port to ensure proper sealing to prevent leakage.
    • Noudata valmistajan suosituksia hydrauliöljyn tyypistä ja täytä järjestelmä suositeltuun tasoon.

Toiminta:

    • Aktivoi hydraulijärjestelmä ja ohjaa sylinterin liikettä hydraulisella ohjausventtiilillä tai muulla sopivalla ohjausmekanismilla.
    • Säädä virtaus ja paine Asetukset halutun nopeuden ja voimantuoton saavuttamiseksi.
    • Regularly monitor cylinder operation for any signs of abnormal behavior, such as leaks, overheating, or unusual noise.

Maintenance Of Rear Cover Trunnion Four Rod Hydraulic Cylinder:

  1. Säännöllinen tarkastus:
    • Perform routine visual inspections to check for signs of wear, leaks, or damage.
    • Inspect the rod surface, seals, and mounting connections for any abnormalities and address any issues promptly.
  2. Voitelu:
    • Follow the manufacturer’s guidelines for lubrication intervals and use a recommended lubricant to ensure smooth operation.
    • Apply lubrication to the rod, seals, and other moving parts to minimize friction and extend the cylinder’s lifespan.
  3. Tiivisteen vaihto:
    • Over time, seals may wear out and require replacement. If leakage is detected, carefully remove the old seals and install new ones according to the manufacturer’s specifications.

How Do You Rebuild A Hydraulic Cylinder?

Rebuilding a hydraulic cylinder involves disassembling the cylinder, inspecting its components, replacing worn or damaged parts, and reassembling it to restore its functionality. Here’s a general step-by-step guide on how to rebuild a hydraulic cylinder:

  1. Gather the Necessary Tools and Equipment:
    • Before starting the rebuild process, gather the required tools, such as wrenches, pliers, a rubber mallet, a cylinder hone, new seals and O-rings, a seal installation tool, and a hydraulic cylinder repair kit.
  2. Safety Precautions:
    • Ensure the hydraulic system is depressurized and the cylinder is disconnected from any power source.
    • Use appropriate protective equipment (PPE), such as gloves and safety glasses, to protect yourself during the rebuild.
  3. Cylinder Disassembly:
    • Remove the hydraulic cylinder from the equipment or system.
    • Carefully disassemble the cylinder, starting with removing end caps or retaining rings.
    • Release the pressure within the cylinder by retracting the rod fully.
    • Take note of the sequence of the removed components for accurate reassembly.
  4. Component Inspection:
    • Inspect all cylinder components, including the rod, piston, seals, and bearings, for signs of wear, damage, or corrosion.
    • Measure the dimensions of critical components, such as the rod and bore diameter, to ensure they are within specifications.
    • Pay close attention to the condition of seals and O-rings, as they are familiar sources of hydraulic cylinder issues.
  5. Replacement of Worn or Damaged Parts:
    • Replace any seals, O-rings, or other damaged components identified during the inspection.
    • Ensure the replacement parts are compatible with the cylinder model and meet the required specifications.
    • Lubricate the new seals or O-rings with hydraulic oil before installation.
  6. Cylinder Reassembly:
    • Clean all disassembled components thoroughly to remove any dirt or debris.
    • Apply a thin film of hydraulic oil to the components during reassembly to provide lubrication.
    • Follow the manufacturer’s instructions or repair manual to ensure correct fastener reassembly and torque specifications.
  7. Testing and Installation:
    • Once the cylinder is reassembled, test its functionality by applying hydraulic pressure.
    • Check for leaks, abnormal noises, or erratic movements during testing.
    • If the cylinder operates smoothly without issues, it can be reinstalled into the equipment or system.

Tehtaan kapasiteetti ja kapasiteetti:

(1) Kokoonpano

Meillä on ensiluokkainen riippumaton tutkimus- ja kehitystyön kokoonpanoalusta. Hydraulisylinterien tuotantopajassa on neljä puoliautomaattista nostosylinterin kokoonpanolinjaa ja yksi automaattinen kallistussylinterin kokoonpanolinja, joiden suunniteltu vuotuinen tuotantokapasiteetti on 1 miljoona kappaletta. Erikoissylinterin työpaja on varustettu erilaisilla eritelmillä puoliautomaattisen puhdistusasennuksen kokoonpanojärjestelmällä, jonka suunniteltu vuotuinen tuotantokapasiteetti on 200 000, ja se on varustettu kuuluisilla CNC-työstölaitteilla, työstökeskuksella, korkean tarkkuuden sylinterin käsittelyyn tarkoitetuilla erityislaitteilla, robottihitsauskoneella, automaattisella puhdistuslaitteella, automaattisella sylinterin kokoonpanokoneella ja automaattisella maalaustuotantolinjalla. Olemassa olevat kriittiset laitteet yli 300 sarjaa (sarjaa). Laiteresurssien optimaalinen kohdentaminen ja tehokas käyttö varmistavat tuotteiden tarkkuusvaatimukset ja täyttävät tuotteiden laatuvaatimukset.

(2) Koneistus

Työstöpaja on varustettu räätälöidyllä kaltevalla kiskosorvauskeskuksella, työstökeskuksella, suurnopeus-hiontakoneella, hitsausrobotilla ja muilla vastaavilla laitteilla, joilla voidaan käsitellä sylinteriputkia, joiden sisähalkaisija on enintään 400 mm ja enimmäispituus on 6 metriä.

(3) Hitsaus

(4) Maalaus ja pinnoitus

Pienillä ja keskisuurilla sylinterin automaattisilla vesipohjaisilla maalipinnoituslinjoilla automaattisen robotin lastaus- ja purku- ja automaattisen ruiskutuksen saavuttamiseksi, suunnittelukapasiteetti on 4000 kappaletta vuorossa;
Meillä on myös puoliautomaattinen maalauslinja suurille sylintereille, joka toimii voimaketjulla ja jonka suunnittelukapasiteetti on 60 laatikkoa työvuorossa.

(5) Testaus

Meillä on ensiluokkaiset tarkastustilat ja testialustat, joilla varmistetaan, että sylinterin suorituskyky täyttää vaatimukset.

 

 

Olemme yksi parhaista kevyiden nelitankohydraulisylinterien valmistajista. Voimme tarjota kattavan kevyen nelitankohydraulisen sylinterin varaston. Tarjoamme myös vastaavan maatalousvaihteistot. Olemme vieneet tuotteitamme asiakkaillemme ympäri maailmaa ja ansainneet hyvän maineen ylivoimaisen tuotteidemme laadun ja myynnin jälkeisen palvelun ansiosta. Toivotamme lämpimästi tervetulleeksi asiakkaat sekä kotimaassa että ulkomailla ottamaan yhteyttä meihin neuvottelemaan liiketoiminnasta, vaihtamaan tietoja ja tehdä yhteistyötä kanssamme!

Tutustu VR-tehtaaseemme:

Tutustu VR-tehtaaseemme seuraavalla kierroksella

Miten haarukkatrukin hydraulisylinteri toimii?

Hydraulisylinteri Sovellus:

Hydraulisylinterin kaksi perustyyppiä ja toimintaperiaatteet:

    fiFI