Press Side Cylinder
The press side cylinder is a powerful and reliable component designed to optimize pressing operations across various industries. This innovative cylinder delivers precise force and exceptional performance, enabling you to achieve superior results in your pressing applications.
The press side cylinder offers a reliable, efficient solution for enhancing pressing operations. With its robust construction, precision force generation, and energy efficiency, this cylinder empowers you to achieve superior results in your pressing applications. By following proper usage methods and maintenance practices, you can maximize your pressing operations’ performance, productivity, and longevity. Choose the press side cylinder to elevate your pressing capabilities and stay ahead in today’s competitive industrial landscape.
Press Side Cylinder Key Characteristics:
- Vankka rakenne:
- The press side cylinder is built with high-quality materials, ensuring durability and long-lasting performance.
- Its robust construction allows it to withstand heavy loads and harsh operating conditions, providing reliability in demanding industrial environments.
- Precision Force Generation:
- This cylinder is engineered to deliver precise force with exceptional accuracy, ensuring consistent and reliable pressing results.
- Its advanced design and manufacturing techniques enable precise force application control, reducing product defects or inconsistencies risk.
- Efficient Energy Consumption:
- The press side cylinder is designed with energy efficiency in mind, optimizing power consumption during pressing operations.
- Its efficient hydraulic system minimizes energy waste, resulting in cost savings and environmental benefits.
Press Side Cylinder Parameter:
| Product Name | Hydraulic Press Side Cylinder |
| Features: | Provide thrust for the press with the master cylinder |
| Plunger: | 420mm～1000mm |
| Stroke: | Stroke≤4500mm |
| Thrust force: | Maximum 24.7MN (Plunger 1000mm/pressure31.5MPa) |
| Hydraulic Side Cylinder Applications: | Hydraulic Press |
Stroke≤4500mm
(Plunger 1000mm/pressure31.5MPa)
Press Cylinder Factory:
Usage Method Of Press Side Cylinder:
- Installation and Integration:
- Mount the press side cylinder securely onto the press frame, ensuring proper alignment and connection.
- Follow the manufacturer’s guidelines and recommendations for installation to ensure optimal performance and safety.
- Hydrauliset liitännät:
- Connect the press side cylinder to the hydraulic power unit using appropriate hoses and fittings.
- Verify the hydraulic connections are tight and leak-free to ensure efficient fluid transfer and reliable operation.
- Pressure Adjustment:
- Adjust the pressure supplied to the press side cylinder according to the specific pressing requirements.
- Consult the manufacturer’s guidelines to determine the recommended pressure range for optimal performance.
- Stroke Length and Speed Control:
- The press side cylinder typically offers adjustable stroke length and speed control options for different pressing applications.
- Familiarize yourself with the cylinder’s control features and functions to achieve desired results.
How To Bleed Air From Tractor Hydraulic System?
Bleeding air from a tractor hydraulic system is an important maintenance task to ensure proper operation and performance. Air in the hydraulic system can lead to reduced efficiency, erratic operation, and potential damage to components. Here are the general steps to bleed air from a tractor hydraulic system:
- Preparation:
- Park the tractor on a level surface and engage the parking brake.
- Ensure that the hydraulic fluid reservoir is filled to the recommended level.
- Locate the bleed screw or valve on the hydraulic system. It is usually located near the highest point of the system or on the hydraulic cylinder.
- Identify the Bleed Points:
- Depending on the tractor model, there may be multiple bleed points in the hydraulic system.
- Common bleed points include hydraulic cylinders, control valves, and other high points in the system where air can accumulate.
- Open the Bleed Screw/Valve:
- Using an appropriate tool, such as a wrench or screwdriver, carefully loosen the bleed screw or valve.
- Ensure that the bleed screw/valve is opened just enough to allow air to escape, without fully removing it.
- Start the Tractor:
- Start the tractor’s engine and let it run at idle speed.
- Allow the hydraulic system to warm up for a few minutes to ensure optimal fluid flow.
- Operate the Hydraulic Controls:
- Engage the hydraulic controls associated with the bleed point you are working on.
- For example, if bleeding air from a loader hydraulic cylinder, operate the loader control lever to extend and retract the cylinder fully.
- Monitor Fluid and Air Release:
- As you operate the hydraulic controls, observe the bleed screw/valve for the release of air bubbles.
- Fluid may also start to flow from the bleed point, indicating that the air is being purged from the system.
- Close the Bleed Screw/Valve:
- Once air bubbles are no longer present, tighten the bleed screw/valve securely.
- Ensure that the bleed screw/valve is properly sealed to prevent fluid leakage.
- Repeat for Other Bleed Points:
- If there are multiple bleed points in the hydraulic system, repeat the bleeding process for each one.
- Start with the highest point and work your way down to ensure that all air is expelled from the system.
- Check Fluid Level:
- After bleeding air from the hydraulic system, check the fluid level in the reservoir.
- If necessary, add hydraulic fluid to maintain the recommended level.
- Test Hydraulic System:
- With the air bled from the system, test the hydraulic controls and functions to ensure smooth and proper operation.
- Verify that the tractor’s hydraulic system operates as expected without any abnormal noises or performance issues.
Tehtaan kapasiteetti ja kapasiteetti:
(1) Kokoonpano
Meillä on ensiluokkainen riippumaton tutkimus- ja kehitystyön kokoonpanoalusta. Hydraulisylinterien tuotantopajassa on neljä puoliautomaattista nostosylinterin kokoonpanolinjaa ja yksi automaattinen kallistussylinterin kokoonpanolinja, joiden suunniteltu vuotuinen tuotantokapasiteetti on 1 miljoona kappaletta. Erikoissylinterin työpaja on varustettu erilaisilla eritelmillä puoliautomaattisen puhdistusasennuksen kokoonpanojärjestelmällä, jonka suunniteltu vuotuinen tuotantokapasiteetti on 200 000, ja se on varustettu kuuluisilla CNC-työstölaitteilla, työstökeskuksella, korkean tarkkuuden sylinterin käsittelyyn tarkoitetuilla erityislaitteilla, robottihitsauskoneella, automaattisella puhdistuslaitteella, automaattisella sylinterin kokoonpanokoneella ja automaattisella maalaustuotantolinjalla. Olemassa olevat kriittiset laitteet yli 300 sarjaa (sarjaa). Laiteresurssien optimaalinen kohdentaminen ja tehokas käyttö varmistavat tuotteiden tarkkuusvaatimukset ja täyttävät tuotteiden laatuvaatimukset.
(2) Koneistus
Työstöpaja on varustettu räätälöidyllä kaltevalla kiskosorvauskeskuksella, työstökeskuksella, suurnopeus-hiontakoneella, hitsausrobotilla ja muilla vastaavilla laitteilla, joilla voidaan käsitellä sylinteriputkia, joiden sisähalkaisija on enintään 400 mm ja enimmäispituus on 6 metriä.
(3) Hitsaus
(4) Maalaus ja pinnoitus
Pienillä ja keskisuurilla sylinterin automaattisilla vesipohjaisilla maalipinnoituslinjoilla automaattisen robotin lastaus- ja purku- ja automaattisen ruiskutuksen saavuttamiseksi, suunnittelukapasiteetti on 4000 kappaletta vuorossa;
Meillä on myös puoliautomaattinen maalauslinja suurille sylintereille, joka toimii voimaketjulla ja jonka suunnittelukapasiteetti on 60 laatikkoa työvuorossa.
(5) Testaus
Meillä on ensiluokkaiset tarkastustilat ja testialustat, joilla varmistetaan, että sylinterin suorituskyky täyttää vaatimukset.
We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding maatalousvaihteistot. We have exported our products to clients worldwide and earned a good reputation because of our superior product quality and after-sales service. We welcome customers at home and abroad to contact us to negotiate business, exchange information, and tehdä yhteistyötä kanssamme!