{"id":1025,"date":"2023-09-07T05:53:50","date_gmt":"2023-09-07T05:53:50","guid":{"rendered":"https:\/\/hydraulic-cylinders.net\/?post_type=product&p=1025"},"modified":"2025-04-16T02:22:21","modified_gmt":"2025-04-16T02:22:21","slug":"ygd-light-rod-hydraulic-cylinder","status":"publish","type":"product","link":"https:\/\/www.hydraulic-cylinders.net\/fr\/produit\/ygd-light-rod-hydraulic-cylinder\/","title":{"rendered":"Cylindre hydraulique YGD Light Rod"},"content":{"rendered":"

Cylindre hydraulique YGD Light Rod<\/strong><\/h1>\n

YGD light rod hydraulic cylinder is the company’s advantage products, manufacturing experience, mature technology, and cost-effectiveness. The cylinder of the light rod adopts a seamless steel pipe. Different working pressures allow the selection of steel tubes with different wall thicknesses. The inner diameter machining precision is high, the structure is compact, the weight is light, and the installation and connection methods are various. It has the advantages of good low-speed performance, stable buffer performance, and a pressure range of 3.5-17MPA, and it is widely used in machine tools, textiles, plastics, agricultural machinery, and equipment hydraulic systems.<\/p>\n

\"\"<\/p>\n

Technical Specification Of YGD Light Rod Hydraulic Cylinder:<\/strong><\/h2>\n

1, The use of pressure 5Mpa the following is recommended to use our factory standard low-pressure tie rod hydraulic cylinder, short processing cycle, cost-effective:
\n2. Minimum pressure: According to the specific application, a particular minimum force is required to ensure the function of the hydraulic cylinder. When there is no load, the recommended minimum pressure of a single-rod hydraulic cylinder is 1MPA.
\n3, hydraulic cylinder installation: only allow in the case of no pressure, install the hydraulic cylinder, and screw the piston rod end into the machine.
\n4, treatment agent: no special instructions; The hydraulic cylinder uses a grey primer.
\n5. Limited by stroke length, cylinder diameter, and rated working pressure, the YGD series tie rod hydraulic cylinder is usually suitable for stroke \u22641.5m, cylinder diameter \u2264250mm, and rated pressure PN\u226421MPa.
\nIf the cylinder diameter is too large, the rated pressure is too high, or the stroke is too long, it is recommended to use a welding structure;
\n1) When the rod length is too long, it is easy to deviate during installation, resulting in leakage of the cylinder end.
\n2) When the inner diameter of the cylinder is too large, or the rated pressure is too high, due to the disassembly problem of the radial size arrangement, the diameter of the tie rod is limited, resulting in the tensile stress of the tie rod may exceed the yield limit.<\/p>\n

YGD Light Rod Hydraulic Cylinder:<\/strong><\/h2>\n

(1) TB Type Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(2) TC Type Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(3) TD Type Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(4) Front Cover Rectangular Flange Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(5) Rear Cover Rectangular Flange Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(6) C Type Seat Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(7) Rear Single Earring Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(8) Rear Double Earring Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(9) Rear Earring With Spherical Bearing Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(10) Front Cover Trunnion Four Rod Hydraulic Cylinder<\/h3>\n

\"\"<\/p>\n

\"\"<\/p>\n

(11) Rear Cover Trunnion Four Rod Hydraulic Cylinder<\/h3>\n

\"\"<\/p>\n

\"\"<\/p>\n

(12) Middle Fixed Trunnion Four Rod Hydraulic Cylinder<\/h3>\n

\"\" \"\"<\/p>\n

(13) Double Piston Rod Hydraulic Cylinder<\/h3>\n

\"\"<\/p>\n

Technical Parameter Of Light Rod Hydraulic Cylinder:<\/strong><\/h2>\n

YG C-D \/d E \u00d7 200-TB 4 1 1-y *
\nC-type :C= differential cylinder; D= constant speed cylinder
\nD\/ D – Cylinder diameter\/rod diameter
\nE – Pressure grade :C=7MPa; E = 16 mpa; D = 21 mpa
\n200 – Stroke mm
\nTB – Installation mode :TB= Pull rod extends out of front cover end; TC= pull rod extension back cover end; TD= extension at both ends of the tie rod; JJ= front cover rectangular flange; HH= rear cover rectangular flange; C= side lug (type C seat); B= posterior monaural; BB= back stud; SBd= Back earrings with spherical bearings; D= front cover trunnion; DB= rear cover trunnion; DD= middle fixed trunnion
\n4 – piston rod end mode :3= non-standard piston rod end; 4= piston rod end external thread; 9= piston rod end internal thread
\n1-oil connection mode :1= inch internal thread; 2= metric internal thread
\n1 – Oil port position (see the following figure from the piston rod end)
\n1 – Buffer position :1= buffer at both ends; 2= no rod-cavity buffer; 3= buffer with rod cavity; 4= No buffer at both ends
\nY – The length of the piston rod is measured in millimeters. Write with words. Leave this option blank<\/p>\n

\"\"<\/p>\n

Ygc Light Rod Hydraulic Cylinder Characteristics:<\/strong><\/h2>\n

\"\"<\/p>\n

Ygc Light Rod Hydraulic Cylinder Installation Method Selection Instructions:<\/strong><\/h2>\n

1, Tie rod extension mounting (TB, TC, TD) cylinders are suitable for linear force transmission applications, especially useful in the case of limited space. Cylinder head-end rod mounting is best suited for compression. When the piston rod is stretched, the installation method of the end of the cylinder head should be specified. A cylinder with a pull rod extending from both ends can be fixed to a machine component from either end, while the free end of the cylinder can support a bracket or switch.<\/p>\n

2, Fflange-mounted (JJ, HH) cylinders are also suitable for linear force transmission applications. For compression use, cylinder head installation is the most convenient. The cylinder head shall be specified to be installed where the main load causes the piston rod to be stretched.<\/p>\n

3, Mounted on the tripod (C) cylinder, does not absorb the force on its center line. As a result, the pressure the cylinder applies creates a tipping moment that attempts to flip the cylinder around the mounting bolt. Therefore, it is essential to secure the cylinder firmly to the mounting surface and guide the load effectively so that the lateral load is not applied to the rod seal and piston guide ring.<\/p>\n

4. Hinged cylinders (B, BB, SBd) can absorb the force on their center line and are applied where the machine parts move along the curve. If the bending path of the piston rod is in a plane, two modes of BB and B can be used to fix the cylinder of the earring. For uses where the piston rod will travel along a path on either side of the actual plane of motion, SBd with spherical bearings is recommended.<\/p>\n

5, Trunnion mounting (D, DB, DD) cylinders are designed to absorb the force on their center line. They are suitable for tensile (tension) or compression (thrust) purposes and can move machine members along curved paths within a single plane. The trunnion pins are designed for shear loads only and should withstand minimal bending stress.<\/p>\n

Capacit\u00e9 de l'usine :<\/strong><\/h2>\n

(1) Assemblage<\/h3>\n

Nous disposons d'une plateforme d'assemblage ind\u00e9pendante de recherche et d\u00e9veloppement de premier ordre. Notre atelier de production de v\u00e9rins hydrauliques dispose de quatre lignes d'assemblage semi-automatiques de v\u00e9rins de levage et d'une ligne d'assemblage automatique de v\u00e9rins d'inclinaison, pour une capacit\u00e9 de production annuelle pr\u00e9vue d'un million de pi\u00e8ces. L'atelier de v\u00e9rins sp\u00e9ciaux est \u00e9quip\u00e9 d'un syst\u00e8me d'assemblage de nettoyage semi-automatique de diverses sp\u00e9cifications, d'une capacit\u00e9 de production annuelle pr\u00e9vue de 200\u00a0000 pi\u00e8ces et dispose d'\u00e9quipements d'usinage CNC de pointe, d'un centre d'usinage, d'\u00e9quipements sp\u00e9ciaux d'usinage de haute pr\u00e9cision, d'une machine de soudage robotis\u00e9e, d'une machine de nettoyage automatique, d'une machine d'assemblage automatique de v\u00e9rins et d'une ligne de peinture automatique. Nous disposons de plus de 300 \u00e9quipements critiques. L'allocation optimale et l'utilisation efficace des ressources garantissent la pr\u00e9cision et la qualit\u00e9 des produits.<\/p>\n

\"\" \"\"<\/p>\n

(2) Usinage<\/h3>\n

L'atelier d'usinage est \u00e9quip\u00e9 d'un centre de tournage sur rail inclin\u00e9 personnalis\u00e9, d'un centre d'usinage, d'une machine \u00e0 honer \u00e0 grande vitesse, d'un robot de soudage et d'autres \u00e9quipements connexes, qui peuvent traiter des tubes cylindriques d'un diam\u00e8tre int\u00e9rieur maximal de 400 mm et d'une longueur maximale de 6 m\u00e8tres.<\/p>\n

\"\"<\/p>\n

(3) Soudage<\/h3>\n

\"\"<\/p>\n

(4) Peinture et rev\u00eatement<\/h3>\n

Avec des lignes de rev\u00eatement de peinture \u00e0 base d'eau automatiques \u00e0 cylindre de petite et moyenne taille, pour r\u00e9aliser le chargement et le d\u00e9chargement automatiques par robot et la pulv\u00e9risation automatique, la capacit\u00e9 de conception est de 4 000 pi\u00e8ces par \u00e9quipe ;
\nNous disposons \u00e9galement d'une ligne de production de peinture semi-automatique pour gros cylindres, aliment\u00e9e par une cha\u00eene de traction, d'une capacit\u00e9 de conception de 60 caisses par \u00e9quipe.<\/p>\n

\"\" \"\"<\/p>\n

(5) Essais<\/h3>\n

Nous disposons d'installations d'inspection et de bancs d'essai de premier ordre pour garantir que les performances de la bouteille sont conformes aux exigences.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

 <\/p>\n

Nous sommes l'un des meilleurs fabricants de v\u00e9rins hydrauliques \u00e0 tiges fortes. Nous disposons d'un stock important de v\u00e9rins hydrauliques \u00e0 tiges fortes. Nous fournissons \u00e9galement les accessoires correspondants. bo\u00eetes de vitesses agricoles<\/a>Nous exportons nos produits dans le monde entier et nous avons acquis une excellente r\u00e9putation gr\u00e2ce \u00e0 la qualit\u00e9 sup\u00e9rieure de nos produits et \u00e0 notre service apr\u00e8s-vente. Nous invitons nos clients, nationaux et internationaux, \u00e0 nous contacter pour n\u00e9gocier, \u00e9changer des informations et\u2026 coop\u00e9rer avec nous<\/a>!<\/p>","protected":false},"excerpt":{"rendered":"

YGD Light Rod Hydraulic Cylinder YGD light rod hydraulic cylinder is the company’s advantage products, manufacturing experience, mature technology, and cost-effectiveness. The cylinder of the light rod adopts a seamless steel pipe. Different working pressures allow the selection of steel tubes with different wall thicknesses. The inner diameter machining precision is high, the structure is […]<\/p>","protected":false},"featured_media":1104,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[1376,1550,1525,1509,1386],"product_tag":[1380],"class_list":{"0":"post-1025","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-hydraulic-cylinder","7":"product_cat-double-acting-hydraulic-cylinder","8":"product_cat-machine-tool-hydraulic-cylinders","9":"product_cat-tie-rod-hydraulic-cylinder","10":"product_cat-four-rod-hydraulic-cylinder","11":"product_tag-hydraulic-cylinder","13":"first","14":"instock","15":"shipping-taxable","16":"product-type-simple"},"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/www.hydraulic-cylinders.net\/fr\/wp-json\/wp\/v2\/product\/1025","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hydraulic-cylinders.net\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.hydraulic-cylinders.net\/fr\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/fr\/wp-json\/wp\/v2\/comments?post=1025"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/fr\/wp-json\/wp\/v2\/media\/1104"}],"wp:attachment":[{"href":"https:\/\/www.hydraulic-cylinders.net\/fr\/wp-json\/wp\/v2\/media?parent=1025"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/fr\/wp-json\/wp\/v2\/product_brand?post=1025"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/fr\/wp-json\/wp\/v2\/product_cat?post=1025"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.hydraulic-cylinders.net\/fr\/wp-json\/wp\/v2\/product_tag?post=1025"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}