Replacement Of AHC17556 Reel force Hydraulic Cylinder

The Replacement Of AHC17556 Reel force Hydraulic Cylinder is a hydraulic cylinder that is designed to replace the AHC17556 model. It is used in various equipment models including 616, 616R, 618, 620, 622, 625D, 625F, 630, 630D, 630FD, 635, 635D, 635F, 635FD, 640D, 640FD, 645FD, 725D, 730D, 730FD, 735D, 735FD, 740D, 740FD, 745FD, HD35F, HD35R, HD40F, HD40R, HD45F, HD45R, HD50F, HD50R, RD30F, RD35F, RD40F, RD45F, RDF 30, RDF 35, RDF 40, and RDF 45.

Spesifikasi Produk

• Weight: 6.14 lb
• Tinggi: 1,5 inci
• Lebar: 2,9 inci
• Length: 19.5 in

Fitur Produk

• Improved equipment performance: Replacing damaged or worn-out hydraulic cylinders can restore the equipment’s normal operational capabilities, ensuring its performance in various applications.
• Keamanan yang ditingkatkan: Penggantian silinder hidrolik secara berkala dapat mengurangi bahaya keselamatan yang disebabkan oleh kegagalan silinder, sehingga menjamin keselamatan operator dan peralatan.
• Perlindungan terhadap beban berlebih: Desain silinder baru sering mempertimbangkan mekanisme perlindungan beban berlebih yang lebih baik, sehingga meningkatkan keselamatan.
• Pemasangan cepat: Silinder hidrolik modern dirancang agar mudah dipasang dan diganti, sehingga mengurangi waktu henti.
• Komponen standar: Banyak silinder hidrolik merupakan produk standar, sehingga memudahkan perolehan suku cadang pengganti di pasaran.

We can produce this product and our hydraulic cylinders can perfectly replace these models.

Aplikasi

Here are three examples of applications for this hydraulic cylinder:

1. Excavators: The hydraulic cylinder on the excavator’s boom or bucket may get damaged due to prolonged use or overload, requiring replacement to restore normal operation.
2. Cranes: The hydraulic cylinder on the crane’s boom is prone to wear during frequent lifting and lowering processes, requiring regular replacement to ensure safety.
3. Tractors: The hydraulic cylinder on the front-end loader of a tractor may experience leaks or performance degradation during continuous lifting and tilting operations, necessitating replacement.

Tugas Pemeliharaan

Here are three common maintenance tasks for the hydraulic cylinder:

1. Regular inspections: It is important to regularly inspect the hydraulic cylinder for any signs of wear, leaks, or other issues.
2. Proper lubrication: Applying appropriate lubrication to the hydraulic cylinder can help reduce friction and extend its lifespan.
3. Seal replacement and calibration checks: Periodically replacing seals and performing calibration checks can ensure optimal performance of the hydraulic cylinder.

Pertimbangan Keselamatan dan Faktor Lingkungan

When using hydraulic cylinders, it is important to prioritize safety measures to prevent accidents and ensure the wellbeing of operators. Additionally, considering environmental factors in the design and usage of hydraulic cylinders can minimize their impact on the surroundings.

Diagnosis Kesalahan dan Masalah Umum

Common issues and troubleshooting tips for hydraulic cylinders:

1. Issue 1: Leakage – Possible Cause: Damaged seals or connectors. Solution: Replace the seals or connectors.
2. Issue 2: Slow operation – Possible Cause: Insufficient hydraulic fluid or clogged valves. Solution: Check and refill hydraulic fluid, clean or replace valves if necessary.
3. Issue 3: Noisy operation – Possible Cause: Air in the hydraulic system. Solution: Bleed the system to remove air bubbles.

Tindakan Pencegahan

To minimize potential issues with hydraulic cylinders, it is recommended to:

• Perform regular maintenance tasks as mentioned above.
• Follow proper installation, lubrication, and adjustment procedures.
• Berikan panduan tentang cara menyelaraskan silinder dengan benar selama pemasangan.
• Suggest using appropriate installation brackets to secure the cylinder.
• Merekomendasikan prosedur inspeksi, perbaikan, dan penggantian.
• Menawarkan suku cadang pengganti dan layanan pembangunan kembali untuk memperpanjang umur silinder hidrolik.

Pertimbangan Desain dan Kriteria Pemilihan

When designing and selecting hydraulic cylinders, several factors should be considered:

• Kapasitas menahan beban
• Efektivitas penyegelan
• Daya tahan
• Fitur keselamatan
• Pemeliharaan

Proper selection and design based on these factors can ensure optimal performance and longevity of the hydraulic cylinder.

Penyegelan dan Pelumasan

Hydraulic cylinders use various sealing components, such as piston seals and rod seals, made from wear-resistant materials like polyurethane and nitrile rubber. The cylinder body and threaded end surfaces are finely treated to enhance wear resistance. Regularly adding an appropriate amount of hydraulic oil for lubrication is necessary.

Inspeksi Rutin dan Perawatan Preventif

Regular inspections and preventive maintenance tasks are crucial for the proper functioning of hydraulic cylinders. It is essential to follow correct installation, lubrication, and adjustment procedures. Providing installation guidance, recommending the use of suitable installation brackets for cylinder fixation, suggesting inspection, repair, and replacement programs, and offering tips to extend the lifespan of the hydraulic cylinder.

Panduan Instalasi Produk

Correct installation is vital for the optimal performance of the hydraulic cylinder. Follow these steps:

1. Pastikan permukaan pemasangan bersih dan bebas dari kotoran.
2. Align the cylinder correctly with the equipment.
3. Gunakan braket pemasangan yang sesuai untuk mengencangkan silinder dengan aman.
4. Check for any leaks or abnormalities after installation.

Tentang Perusahaan Kami

We are a manufacturer of replacement hydraulic