Mobile Crane Suspension Cylinder
The mobile crane suspension cylinder is vital in mobile crane systems and is designed to optimize stability and performance during lifting operations. This hydraulic cylinder supports the crane’s suspension system, ensuring smooth and controlled movement while carrying heavy loads.
The mobile crane suspension cylinder is an indispensable component for mobile crane systems, providing stability, load distribution, and height adjustability. With its robust construction, precise hydraulic control, improved suspension capabilities, and ease of operation, this hydraulic cylinder significantly enhances lifting operations’ overall performance and safety. By following proper usage methods and adhering to recommended maintenance practices; operators can maximize the lifespan and reliability of the Mobile Crane Suspension Cylinder, ensuring safe and efficient lifting in various construction and industrial settings. Choose this essential hydraulic component to elevate your mobile crane system’s stability, performance, and versatility, enabling successful operations and achieving new heights of productivity.
Mobile Crane Suspension Cylinder Key Characteristics:
- Robust Construction:
- The Mobile Crane Suspension Cylinder is built with high-quality materials, ensuring durability and reliability in demanding working conditions.
- It is designed to withstand heavy loads, shocks, and vibrations, providing long-lasting performance even in challenging environments.
- Hydraulic Control:
- This cylinder utilizes hydraulic power to control the suspension system of the mobile crane.
- The hydraulic control allows for precise adjustments, ensuring optimal stability and load distribution during lifting operations.
- Improved Suspension:
- The crane’s suspension system achieves enhanced stability and load-bearing capacity by incorporating the mobile crane suspension cylinder.
- It effectively absorbs shocks and vibrations, minimizing the impact on the crane’s structure and ensuring smoother operation.
- Height Adjustment:
- The suspension cylinder enables the adjustment of the crane’s height, allowing operators to adapt to various job site conditions.
- Height adjustability enhances flexibility, enabling the crane to work efficiently in areas with limited overhead clearance or uneven terrain.
Mobile Crane Suspension Cylinder Parameter:
| Product Name | Mobile Crane Suspension Cylinder |
| Features: | Damping system for crane chassis |
| Bore diameter: | 85mm～180mm |
| Rod diameter: | 50mm～100mm Stroke≤300mm |
| Pressure: | Maximum 35MPa |
| Suspension Cylinder Applications: | Mobile Crane |
Mobile Crane Identification Diagram:
Usage Method Of Mobile Crane Suspension Cylinder:
- Familiarize with Controls:
- Before the operation, operators must familiarize themselves with the controls associated with the mobile crane suspension cylinder.
- Understand the control mechanisms and operating procedures specific to the crane model.
- Suspension Adjustment:
- Activate the hydraulic controls to adjust the suspension system according to the desired height or load requirements.
- Ensure the adjustment is performed gradually and smoothly to maintain stability throughout the process.
- Load Distribution:
- Monitor and assess the load distribution on the crane during operation.
- Adjust the suspension system as necessary to balance the load and maintain stability.
- Operating on Uneven Terrain:
- When working on uneven terrain, utilize the suspension cylinder to adjust the crane’s suspension and maintain a level platform.
- This ensures that the load remains stable and that the crane operates safely and efficiently.
How To Release Pressure On Hydraulic System?
To release pressure from a hydraulic system safely, follow these steps:
- Shut Down the System:
- Turn off any power sources or engines connected to the hydraulic system.
- This step ensures that no additional pressure is generated while you release the existing tension.
- Identify the Pressure Release Points:
- Locate the pressure release points in the hydraulic system.
- Common pressure release points include relief, pressure control, or directional control valves.
- Relieve Pressure at the Valve:
- If your system has a relief valve, start by locating it.
- Slowly turn the relief valve counterclockwise to release pressure.
- Monitor the pressure gauge, if available, to observe the pressure dropping.
- Use the Controls:
- If your system has directional control valves, move them to the neutral position.
- This action allows fluid to flow freely and relieves pressure in the system.
- Release Accumulator Pressure:
- If your hydraulic system has an accumulator, it may store pressure even when the system is shut down.
- Refer to the manufacturer’s instructions to release the pressure stored in the accumulator safely.
- Usually, this involves opening a specific valve or venting the accumulator to the atmosphere.
- Bleed the System:
- After releasing the pressure at the designated pressure release points, it is important to bleed the system to ensure no trapped pressure.
- Begin by opening any bleed screws or valves located in the hydraulic system.
- Slowly open them to allow any remaining pressure or air to escape.
- Be cautious and use appropriate personal protective equipment (PPE) to avoid contact with hydraulic fluid.
- Verify Pressure Release:
- Double-check that the pressure has been fully released from the hydraulic system.
- If available, use a pressure gauge or other monitoring devices to ensure the pressure is at or near zero.
Kemampuan & Kapasitas Pabrik:
(1) Perakitan
Kami memiliki platform perakitan penelitian dan pengembangan independen kelas satu. Bengkel produksi silinder hidrolik memiliki empat jalur perakitan silinder pengangkat semi-otomatis dan satu jalur perakitan silinder kemiringan otomatis, dengan kapasitas produksi tahunan yang dirancang sebesar 1 juta keping. Bengkel silinder khusus dilengkapi dengan berbagai spesifikasi sistem perakitan pembersihan semi-otomatis dengan kapasitas produksi tahunan yang dirancang sebesar 200.000 dan dilengkapi dengan peralatan permesinan CNC yang terkenal, pusat permesinan, peralatan khusus pemrosesan silinder presisi tinggi, mesin las robot, mesin pembersih otomatis, mesin perakitan silinder otomatis, dan jalur produksi pengecatan otomatis. Peralatan penting yang ada lebih dari 300 set (set). Alokasi optimal dan penggunaan sumber daya peralatan yang efisien memastikan persyaratan akurasi produk dan memenuhi kebutuhan produk berkualitas tinggi.
(2) Pemesinan
Bengkel permesinan dilengkapi dengan pusat pembubutan rel miring yang disesuaikan, pusat permesinan, mesin pengasah berkecepatan tinggi, robot pengelasan, dan peralatan terkait lainnya, yang dapat menangani pemrosesan tabung silinder dengan diameter bagian dalam maksimum 400mm dan panjang maksimum 6 meter.
(3) Pengelasan
(4) Pengecatan & pelapisan
Dengan jalur pelapisan cat berbasis air otomatis silinder kecil dan menengah, untuk mencapai bongkar muat robot otomatis dan penyemprotan otomatis, kapasitas desain 4000 buah per shift;
Kami juga memiliki lini produksi cat semi-otomatis untuk silinder besar yang ditenagai oleh rantai daya, dengan kapasitas desain 60 kasus per shift.
(5) Pengujian
Kami memiliki fasilitas inspeksi kelas satu dan test bed untuk memastikan bahwa kinerja silinder memenuhi persyaratan.
We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding gearbox pertanian. Kami telah mengekspor produk kami ke klien di seluruh dunia dan mendapatkan reputasi yang baik karena kualitas produk dan layanan purna jual kami yang unggul. Kami menyambut pelanggan di dalam dan luar negeri untuk menghubungi kami untuk menegosiasikan bisnis, bertukar informasi, dan bekerja sama dengan kami!