Site icon Silinder Hidraulik

V90N-DP Series Axial Piston Variable Displacement Double Hydraulic Pump

V90N-DP Series Axial Piston Variable Displacement Double Hydraulic Pump

The V90N-DP series axial piston variable displacement double hydraulic pump is a revolutionary solution that combines power, efficiency, and versatility. Designed to meet the demands of modern hydraulic systems, this pump delivers exceptional performance in a wide range of applications. This comprehensive article will delve into the key features, usage methods, and maintenance guidelines for the v90n-dp series axial piston variable displacement double hydraulic pump.

The V90N-DP series axial piston variable displacement double hydraulic pump is a powerful and versatile solution for hydraulic systems. With its dual pump configuration, variable displacement technology, and high-pressure capability, this pump delivers exceptional performance across various industrial applications. By following the recommended usage methods and adhering to regular maintenance practices, the v90n-dp series pump will continue to provide outstanding performance, contributing to the success of hydraulic systems. Embrace the power of versatility and efficiency with the v90n-dp series axial piston variable displacement double hydraulic pump and unlock the full potential of your hydraulic system.

V90N-DP Series Axial Piston Variable Displacement Double Hydraulic Pump Key Characteristics:

V90N-DP Series Axial Piston Variable Displacement Double Hydraulic Pump Parameter:

Size V90N180DP V90N212DP V90N230DP V90N252DP
Displacement  cc/rev 180×2 212×2 230×2 252×2
Rotation r/min Max for self-priming*1 2000 1800 1800 1800
Max*2 2400 2000 2000 2000
Pressure bar Rated 380 350 350 350
Peak 420 392 392 392
Input torque rating (N.m) 1200 1500 1800 2100
Quantity of oil to fill pump case (L) 10
Suction pressure(bar) 0.7 ~ 2
Shell pressure(bar) 1
Max shell pressure(bar) 3
Weight(kg) 262 270 270 320
Oil viscosity (mm2/s) 10 ~ 1000*3(Best range 16 ~ 36)

V90N-DP Series Axial Piston Variable Displacement Double Hydraulic Pump Advantages:

•  Applied in high pressure open circuit hydraulic systems
• High rated pressure, high efficiency, long life, applied in heavy load conditions
• Flywheel flange interface allows direct connection to PTO
• Compact design, small installation length
• Integrates multiple control methods to perform composite control of pressure, flow and power

V90N-DP Series Axial Piston Variable Displacement Double Hydraulic Pump Application:

Usage Method Of V90N-DP Series Axial Piston Variable Displacement Double Hydraulic Pump:

How To Bleed Hydraulic Cylinder?

Bleeding a hydraulic cylinder is a process used to remove air or gas trapped within the system and ensure proper functioning. Here’s a step-by-step guide on how to bleed a hydraulic cylinder:

  1. Safety Precautions:
    • Ensure the hydraulic system is depressurized and turned off.
    • Wear appropriate personal protective equipment, such as gloves and safety glasses.
  2. Locate Bleeder Valve:
    • Identify the bleeder valve on the hydraulic cylinder. It is typically located near the highest point of the cylinder or on the end cap.
  3. Prepare Tools:
    • Gather the necessary tools, including a wrench or socket that fits the bleeder valve.
  4. Position a Container:
    • Place a suitable container or absorbent material beneath the bleeder valve to catch any fluid that may be released during the bleeding process.
  5. Open Bleeder Valve:
    • Slowly and carefully open the bleeder valve counterclockwise using the wrench or socket. This allows air or gas to escape from the cylinder.
  6. Monitor Fluid Flow:
    • Keep an eye on the fluid flow from the bleeder valve. Initially, air or gas may be released, followed by a steady stream of hydraulic fluid. Allow the fluid to flow until all air bubbles are eliminated and only fluid is being expelled.
  7. Close Bleeder Valve:
    • Once only fluid is flowing consistently, close the bleeder valve clockwise. Ensure it is tightened securely, but avoid over-tightening to prevent damage.
  8. Check Fluid Level:
    • Verify the hydraulic fluid level in the system reservoir. If necessary, add fluid to maintain the recommended level.
  9. Test Cylinder Operation:
    • Turn on the hydraulic system and operate the cylinder through its full range of motion. Observe for any abnormalities or irregularities in its movement.
  10. Repeat if Necessary:
    • If there are still signs of air in the system or if the cylinder’s operation is not smooth, repeat the bleeding process. Open the bleeder valve again and allow more fluid to flow until all air is purged.
  11. Final Check and Maintenance:
    • Conduct a final inspection of the hydraulic system for any leaks, proper fluid level, and smooth operation. Address any issues as needed.
    • Implement a regular maintenance schedule for the hydraulic system, including periodic checks for air accumulation and bleeding if necessary.

Kemampuan & Kapasitas Pabrik:

(1) Perakitan

Kami memiliki platform perakitan penelitian dan pengembangan independen kelas satu. Bengkel produksi silinder hidrolik memiliki empat jalur perakitan silinder pengangkat semi-otomatis dan satu jalur perakitan silinder kemiringan otomatis, dengan kapasitas produksi tahunan yang dirancang sebesar 1 juta keping. Bengkel silinder khusus dilengkapi dengan berbagai spesifikasi sistem perakitan pembersihan semi-otomatis dengan kapasitas produksi tahunan yang dirancang sebesar 200.000 dan dilengkapi dengan peralatan permesinan CNC yang terkenal, pusat permesinan, peralatan khusus pemrosesan silinder presisi tinggi, mesin las robot, mesin pembersih otomatis, mesin perakitan silinder otomatis, dan jalur produksi pengecatan otomatis. Peralatan penting yang ada lebih dari 300 set (set). Alokasi optimal dan penggunaan sumber daya peralatan yang efisien memastikan persyaratan akurasi produk dan memenuhi kebutuhan produk berkualitas tinggi.

(2) Pemesinan

Bengkel permesinan dilengkapi dengan pusat pembubutan rel miring yang disesuaikan, pusat permesinan, mesin pengasah berkecepatan tinggi, robot pengelasan, dan peralatan terkait lainnya, yang dapat menangani pemrosesan tabung silinder dengan diameter bagian dalam maksimum 400mm dan panjang maksimum 6 meter.

(3) Pengelasan

(4) Pengecatan & pelapisan

Dengan jalur pelapisan cat berbasis air otomatis silinder kecil dan menengah, untuk mencapai bongkar muat robot otomatis dan penyemprotan otomatis, kapasitas desain 4000 buah per shift;
Kami juga memiliki lini produksi cat semi-otomatis untuk silinder besar yang ditenagai oleh rantai daya, dengan kapasitas desain 60 kasus per shift.

(5) Pengujian

Kami memiliki fasilitas inspeksi kelas satu dan test bed untuk memastikan bahwa kinerja silinder memenuhi persyaratan.

 

 

We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding gearbox pertanian. Kami telah mengekspor produk kami ke klien di seluruh dunia dan mendapatkan reputasi yang baik karena kualitas produk dan layanan purna jual kami yang unggul. Kami menyambut pelanggan di dalam dan luar negeri untuk menghubungi kami untuk menegosiasikan bisnis, bertukar informasi, dan bekerja sama dengan kami!

 

Exit mobile version