Z2S 시리즈 파일럿 작동 체크 유압 밸브

The Z2S series pilot operated check hydraulic valve is a cutting-edge solution designed to optimize the performance and control of hydraulic systems. With its advanced design and versatile features, this valve enhances fluid flow management, ensuring efficient and reliable operation.

The Z2S series pilot operated check hydraulic valve is an essential component for hydraulic systems, offering precise control, high flow capacity, and reliable check functionality. With its pilot operated design and pressure control capabilities, it optimizes fluid flow and enhances system performance. By following the recommended usage methods and adhering to regular maintenance practices, the Z2S series valve will continue to provide efficient and reliable operation. Upgrade your hydraulic system with the Z2S series pilot operated check hydraulic valve and experience the benefits of enhanced control and efficiency.

Z2S Series Pilot Operated Check Hydraulic Valve Key Characteristics:

• 조종사가 조작하는 설계:
  • The Z2S series valve incorporates a pilot-operated mechanism that enables precise control over fluid flow.
  • This design allows for enhanced accuracy and responsiveness, ensuring optimal system performance.
• Check Functionality:
  • The valve features a built-in check function that allows unidirectional fluid flow while preventing backflow.
  • This ensures system integrity and prevents potential damage, providing peace of mind during operation.
• 고유량 용량:
  • The Z2S series hydraulic valve is engineered to handle high flow rates, making it suitable for efficient fluid control applications.
  • Its optimized flow path minimizes pressure drop, maximizing system efficiency and reducing energy consumption.
• Pressure Control:
  • This hydraulic valve offers precise pressure control capabilities, allowing for managing pressure levels within the hydraulic system.
  • It ensures stability and reliability by maintaining consistent pressure, even under varying load conditions.

Z2S Series Pilot Operated Check Hydraulic Valve Parameter:

Z2S Series Pilot Operated Check Hydraulic Valve Advantages:

NG6
• 샌드위치형 구조
• Installation face follow DIN 24340 A, ISO 4401, CETOP-RP121H
• One or two sets of working oil orifices leak free sealing according to requirements
• Applied for sandwich type installation
• Three opening pressure
NG10
• Connection size follow DIN 24340
• Have one or two leak free sealingports
• Sandwich type structure, used in vertical sandwich type installation
• Four opening pressure, optional
NG16
• Connection size follow DIN 24340
• Have one or two leak free sealingports
• Sandwich type structure, used in vertical sandwich type installation
• Four opening pressure, optional
NG22
• Connection size follow DIN 24340
• Have one or two leak free sealingports
• Sandwich type structure, used in vertical sandwich type installation
• Four opening pressure, optional

Usage Method Of Z2S Series Pilot Operated Check Hydraulic Valve:

• 시스템 통합:
  • Identify the appropriate location for the Z2S series valve within the hydraulic system, considering the desired flow direction and pressure control requirements.
  • 시스템의 압력 및 흐름 사양과의 호환성을 보장합니다.
  • Install the valve in-line with the fluid flow, following the manufacturer’s guidelines.
• Pilot Connection:
  • Connect the pilot line to an external control device, such as a pressure relief valve or a proportional pressure control valve.
  • Ensure proper sizing and connections to enable accurate pressure regulation.
• 유체 연결:
  • 안전하고 누출 없는 연결을 위해 호환 가능한 유압 피팅과 호스를 선택하세요.
  • 설치 과정에서 적절한 토크 값에 대한 제조업체의 지침을 따르세요.
  • 안정적인 밀봉을 위해 적절한 나사산 밀봉제나 테이프를 사용하세요.
• 시스템 교정:
  • Calibrate the pilot control device according to the desired pressure settings and system requirements.
  • Adjust the control parameters to achieve the desired pressure regulation and response characteristics.

How To Bleed A Hydraulic Clutch Without Bleeder Valve?

Bleeding a hydraulic clutch without a bleeder valve can be a bit more challenging, but it is still possible. Here’s a step-by-step guide on how to bleed a hydraulic clutch without a bleeder valve:

1. 안전 예방 조치:
   • 장갑, 안전 안경 등 적절한 개인 보호 장비를 착용하여 안전을 최우선으로 하세요.
   • Make sure the hydraulic system is depressurized. Turn off the engine and ensure the clutch pedal is not depressed.
2. Locate the Clutch Slave Cylinder:
   • Identify the location of the clutch slave cylinder. It is usually mounted on or near the transmission bell housing and connected to the clutch release mechanism.
3. Prepare the Tools:
   • Gather the necessary tools, including an open-end wrench or line wrench that fits the hydraulic line fittings, a clean container to collect the old fluid, and fresh hydraulic clutch fluid.
4. Access the Hydraulic Line:
   • Locate the hydraulic line connected to the clutch slave cylinder.
   • Loosen the fittings at both ends of the hydraulic line using the appropriate wrench.
   • Place the container beneath the line to catch any fluid that may leak out during the bleeding process.
5. Gravity Bleeding:
   • Fill the clutch master cylinder reservoir with fresh hydraulic clutch fluid.
   • Leave the fittings loose and allow the fluid to gravity bleed by letting it flow from the clutch master cylinder, through the hydraulic line, and into the container.
   • Keep an eye on the fluid level in the master cylinder reservoir, ensuring it remains topped up during the bleeding process.
6. Manual Bleeding:
   • Once the fluid flows steadily and is free of air bubbles, it’s time to bleed the hydraulic clutch manually.
   • Enlist the help of a second person to operate the clutch pedal while you monitor and manipulate the hydraulic line fittings.
   • Instruct the person to depress the clutch pedal and hold it down slowly.
7. Open and Close the Fittings:
   • As the person holds the clutch pedal down, quickly open and close the fitting at the clutch slave cylinder end of the hydraulic line.
   • This action creates pressure and forces trapped air bubbles to move towards the open fitting.
8. 이 과정을 반복하세요:
   • Repeat the process of opening and closing the fitting multiple times while the clutch pedal is held down to expel any remaining air bubbles.
   • Ensure that the person operating the clutch pedal releases it only after you have closed the fitting securely.
9. Tighten the Fittings:
   • Once the manual bleeding process is complete, tighten the hydraulic line fittings at both ends using the wrench.
   • Ensure they are securely tightened to prevent any leaks.
10. Test the Clutch:
    • Start the engine and test the clutch pedal for proper operation.
    • Depress and release the clutch pedal several times to ensure smooth engagement and disengagement.
11. Ongoing Maintenance:
    • Regularly check the clutch fluid level and inspect the system for any signs of leaks or air accumulation.
    • If you notice recurring air in the system or experience difficulties with the clutch, it’s recommended to seek assistance from a qualified professional to identify and resolve any underlying issues.

공장의 역량 및 용량:

(1) 조립

당사는 최고 수준의 독자적인 연구개발 조립 플랫폼을 보유하고 있습니다. 유압 실린더 생산 작업장은 4개의 반자동 리프팅 실린더 조립 라인과 1개의 자동 틸트 실린더 조립 라인을 갖추고 있으며, 연간 100만 개의 설계 생산 능력을 갖추고 있습니다. 특수 실린더 작업장은 다양한 사양의 반자동 세척 조립 시스템을 갖추고 있으며, 연간 20만 개의 설계 생산 능력을 갖추고 있습니다. 또한, 유명 CNC 가공 장비, 머시닝 센터, 고정밀 실린더 가공 특수 장비, 로봇 용접기, 자동 세척기, 자동 실린더 조립기, 자동 도장 생산 라인을 갖추고 있습니다. 300대 이상의 핵심 장비를 보유하고 있으며, 장비 자원의 최적 배치 및 효율적인 사용을 통해 제품의 정밀성 요구 사항을 충족하고 고품질 요구를 충족합니다.

(2) 가공

가공공장은 맞춤형 경사레일 터닝센터, 가공센터, 고속 호닝머신, 용접로봇 및 기타 관련 장비를 갖추고 있으며, 최대 내경 400mm, 최대 길이 6m의 원통형 튜브를 가공할 수 있습니다.

(3) 용접

(4) 도장 및 코팅

소형, 중형 실린더 자동 수성 페인트 코팅 라인을 통해 자동 로봇 로딩 및 언로딩과 자동 분무를 실현하며, 교대당 4000개의 설계 용량을 달성합니다.
또한, 우리는 60개의 케이스를 교대로 생산할 수 있는 설계 용량을 갖춘 파워 체인으로 구동되는 대형 실린더용 반자동 페인트 생산 라인을 보유하고 있습니다.

(5) 테스트

당사는 실린더의 성능이 요구 사항을 충족하는지 확인하기 위해 일류 검사 시설과 테스트 베드를 갖추고 있습니다.

저희는 최고의 유압 실린더 제조업체 중 하나입니다. 다양한 유압 실린더를 공급할 수 있으며, 관련 제품도 제공합니다. 농업용 기어박스저희는 전 세계 고객에게 제품을 수출해 왔으며, 탁월한 제품 품질과 애프터서비스를 통해 좋은 평판을 얻고 있습니다. 국내외 고객 여러분의 사업 상담, 정보 교환, 그리고 우리와 협력하다!