DBET(E) SeriesProportional Pressure Relief Valve
The DBET(E) series proportional pressure relief valve is a state-of-the-art hydraulic component designed to provide precise and efficient pressure control in various industrial applications. With its advanced features, superior control capabilities, and reliable performance, this valve is an excellent choice for optimizing system performance.
The DBET(E) series proportional pressure relief valve offers exceptional control and performance optimization for hydraulic systems. With its proportional control, pressure relief function, high flow capacity, and fast response time, this valve provides precise pressure regulation and system protection. By following the recommended usage methods and maintenance guidelines, you can harness the full potential of this valve and achieve enhanced performance in your hydraulic applications. Upgrade your hydraulic system today with the DBET(E) series proportional pressure relief valve and experience optimal control and efficiency like never before.
DBET(E) SeriesProportional Pressure Relief Valve Key Characteristics:
- Proportional Control:
- The DBET(E) series valve offers proportional control, allowing for precise adjustment of pressure levels.
- This proportional control capability ensures accurate pressure regulation based on specific system requirements, enhancing performance and efficiency.
- Pressure Relief Function:
- With its pressure relief functionality, this valve protects hydraulic systems from excessive pressure by diverting excess flow.
- The pressure relief feature ensures system safety, preventing component damage and ensuring reliable operation.
- Augsta plūsmas jauda:
- The DBET(E) series valve is designed to handle high flow rates, making it suitable for applications that require substantial fluid volumes.
- Its high flow capacity enables efficient operation even in demanding industrial environments.
- Fast Response Time:
- This valve boasts a fast response time, allowing for quick adjustments to pressure changes in the system.
- The rapid response ensures precise control and minimizes pressure fluctuations, contributing to stable and consistent system performance.
DBET(E) SeriesProportional Pressure Relief Valve Parameter:
| Šķidrums | Minerāleļļa, kas piemērota NBR un FKM blīvējumiem | |
| Fosfāta esteris FKM blīvējumam | ||
| Šķidruma temperatūras diapazons | ℃ | -30 līdz +80 (NBR blīvējumi) |
| -20 to +80 (FKM seals) | ||
| Viskozitātes diapazons | mm2/s | 15 to 380 |
| Piesārņojuma pakāpe | Maximum permissible degree of fluid contamination: Class 9 and ISO4406 Class 20/18/15 | |
| Max. operating pressure (Port P) | bārs | 350 |
| Maks. iestatīšanas spiediens | bārs | 50; 100; 200; 315; 350 |
| Min. iestatāmais spiediens | See characteristic curves | |
| Min. iestatāmais spiediens pie 0 komandas vērtības | =Min. iestatāmais spiediens | |
| Return pressure(Port T) | bārs | Separate and at zero pressure to tank |
| Maks. plūsmas ātrums | L/min | 2 |
| Linearitāte | ± 3.5 % of max. settable pressure | |
| Histerēze | ± 1.5 % of max. settable pressure | |
| Atkārtojamība | ＜ ± 2 % of max. settable pressure | |
| Pārslēgšanas laiks | kundze | 30 to 150 (system dependent) |
DBET(E) SeriesProportional Pressure Relief Valve Advantages:
• Direct, to restrict system pressure
• Installation face follows ISO 4401-03-02-0-05
• Pieci spiediena diapazoni
• Accompanying electronic amplifier VT-2000 or plugin amplifier VT-SSPA1-…-L2X (separate order)
Usage Method Of DBET(E) SeriesProportional Pressure Relief Valve :
- Sistēmas novērtēšana:
- Evaluate your hydraulic system requirements, considering factors such as flow rate, pressure range, and system dynamics.
- Determine if the proportional pressure control offered by the DBET(E) Series Valve aligns with your system’s needs.
- Vārsta izvēle:
- Select the appropriate variant of the DBET(E) series valve based on your system parameters and performance requirements.
- Consider factors such as flow capacity, pressure range, and electrical control options to ensure optimal compatibility and functionality.
- Uzstādīšana:
- Follow the manufacturer’s installation instructions carefully to ensure proper placement and secure mounting of the valve.
- Ensure that the valve is correctly positioned within the hydraulic system, considering factors such as fluid flow direction and accessibility for maintenance.
- Elektriskie savienojumi:
- Connect the electrical wiring to the valve’s control terminals according to the manufacturer’s guidelines.
- Ensure that the electrical connections are secure and properly insulated to prevent any electrical faults or malfunctions.
- Calibration and Adjustment:
- Calibrate and adjust the valve’s proportional control parameters, such as gain and offset, as per the manufacturer’s specifications.
- Fine-tune the valve settings to achieve the desired pressure control and system performance.
How To Replace Shower Valve Cartridge?
Replacing a shower valve cartridge is a common maintenance task that can restore proper functioning to your shower. Follow the step-by-step instructions below to successfully replace a shower valve cartridge:
- Gather The Necessary Tools And Materials:
- Replacement shower valve cartridge
- Adjustable wrench or pliers
- Screwdriver (Phillips or flathead, depending on your specific shower valve)
- Plumbing grease or lubricant
- Towels or rags to catch any water or debris
- Turn Off The Water Supply:
- Locate the main water shut-off valve for your home and turn it off to stop the water supply to the shower.
- Open the shower faucet to drain any remaining water in the pipes.
- Remove The Handle:
- Depending on the type of shower handle you have, you may need to remove a decorative cap or cover to access the handle screw.
- Use a screwdriver to remove the screw holding the handle in place.
- Gently pull the handle away from the wall to detach it from the valve.
- Remove The Trim Plate Or Escutcheon:
- The trim plate covers the valve assembly and is usually held in place by screws.
- Unscrew and remove the trim plate to expose the valve cartridge.
- Remove The Old Cartridge:
- Look for a retaining nut or clip securing the cartridge in place.
- Use pliers or an adjustable wrench to loosen and remove the retaining nut or clip.
- Once the retaining mechanism is removed, carefully pull the old cartridge straight out of the valve body.
- Note the orientation of the cartridge for proper installation of the replacement.
- Install The New Cartridge:
- Apply a thin layer of plumbing grease or lubricant to the o-rings of the new cartridge to ensure smooth operation.
- Insert the new cartridge into the valve body, aligning it with the same orientation as the old cartridge.
- Firmly push the new cartridge into place until it is fully seated.
- Reassemble The Valve:
- Replace the retaining nut or clip to secure the new cartridge in place.
- Reattach the trim plate or escutcheon and tighten the screws to hold it securely.
- Slide the shower handle back onto the valve stem and tighten the handle screw to secure it.
- Turn on the water supply:
- Slowly turn on the main water supply valve for your home to allow water to flow back into the shower.
- Check for any leaks around the valve and handle. If you notice any leaks, tighten the necessary connections or seek professional assistance.
- Test The Shower:
- Turn on the shower and check for proper water flow and temperature control.
- Adjust the handle as needed to achieve the desired water temperature and flow.
Rūpnīcas iespējas un jauda:
(1) Montāža
Mums ir pirmklasīga neatkarīga pētniecības un attīstības montāžas platforma. Hidraulisko cilindru ražošanas darbnīcā ir četras pusautomātiskas pacelšanas cilindru montāžas līnijas un viena automātiskā slīpuma cilindru montāžas līnija ar projektēto gada ražošanas jaudu 1 miljons vienību. Speciālo cilindru darbnīca ir aprīkota ar dažādu specifikāciju pusautomātisku tīrīšanas montāžas sistēmu ar projektēto gada ražošanas jaudu 200 000 vienību un aprīkota ar slavenām CNC apstrādes iekārtām, apstrādes centru, augstas precizitātes cilindru apstrādes speciālo aprīkojumu, robotizētu metināšanas iekārtu, automātisku tīrīšanas iekārtu, automātisku cilindru montāžas iekārtu un automātisku krāsošanas ražošanas līniju. Esošais kritiskais aprīkojums ir vairāk nekā 300 komplektu (komplektu). Optimāla iekārtu resursu sadale un efektīva izmantošana nodrošina produktu precizitātes prasības un apmierina produktu augstās kvalitātes prasības.
(2) Apstrāde
Apstrādes cehs ir aprīkots ar pielāgotu slīpo sliežu virpošanas centru, apstrādes centru, ātrgaitas asināšanas mašīnu, metināšanas robotu un citu saistītu aprīkojumu, kas var apstrādāt cilindriskas caurules ar maksimālo iekšējo diametru 400 mm un maksimālo garumu 6 metri.
(3) Metināšana
(4) Krāsošana un pārklāšana
Ar mazām un vidēja izmēra cilindriskām automātiskām ūdens bāzes krāsu pārklāšanas līnijām, lai panāktu automātisku robotu iekraušanu un izkraušanu un automātisku izsmidzināšanu, projektētā jauda ir 4000 gabali maiņā;
Mums ir arī pusautomātiska krāsu ražošanas līnija lieliem baloniem, ko darbina ķēdes piedziņa, ar 60 kastu konstrukcijas jaudu vienā maiņā.
(5) Testēšana
Mums ir augstākās klases pārbaudes iekārtas un testēšanas stendi, lai nodrošinātu, ka balona veiktspēja atbilst prasībām.
Mēs esam viens no labākajiem hidraulisko cilindru ražotājiem. Mēs varam piedāvāt visaptverošus hidrauliskos cilindrus. Mēs nodrošinām arī atbilstošus lauksaimniecības pārnesumkārbas. Mēs esam eksportējuši savus produktus klientiem visā pasaulē un esam ieguvuši labu reputāciju, pateicoties mūsu izcilajai produktu kvalitātei un pēcpārdošanas servisam. Mēs aicinām klientus no valsts un ārvalstīm sazināties ar mums, lai risinātu biznesa sarunas, apmainītos ar informāciju un... sadarboties ar mums!