50SD58-40 Solenoid Directional Valve

The 50sd58-40 solenoid directional valve is a cutting-edge and versatile component designed to revolutionize fluid control systems. With its exceptional performance and precise flow control capabilities, this valve is the ultimate solution for a wide range of industrial applications. From manufacturing to automation and beyond, the 50sd58-40 solenoid directional valve delivers unparalleled control and reliability.

The 30SD16-22 solenoid directional valve is essential for precise fluid control in industrial applications. Its robust construction, efficient performance, and versatility make it an ideal choice for many fluid control systems. Proper maintenance will ensure its optimal functionality and longevity. Invest in the 30SD16-22 solenoid directional valve to enhance fluid control operations and achieve exceptional results.

50SD58-30 Solenoid Directional Valve Characteristics:

1. Superior Construction: Crafted with the highest quality materials, the 50SD58-40 Solenoid Directional Valve is built to withstand the most demanding environments. Its robust construction ensures durability, longevity, and resistance to wear, corrosion, and extreme operating conditions.
2. Optimal Flow Control: This valve offers exceptional flow control capabilities, allowing for precise adjustment of fluid rates. With excellent repeatability and rapid response times, it ensures accurate and efficient control over fluid flow, enhancing the overall performance of your system.
3. Versatile Configuration: The 50SD58-40 Solenoid Directional Valve is available in various configurations, including inline, manifold, or subplate mounting options. This versatility allows for seamless integration into different fluid control systems, making it suitable for a wide range of applications.
4. Reliable Performance: Engineered to deliver consistent and reliable performance, this valve is built to meet the highest industry standards. Its advanced design and meticulous manufacturing ensure optimal functionality and dependable operation, reducing downtime and maintenance costs.

50SD58-30 Solenoid Directional Valve Parameter:

50SD58-30 Solenoid Directional Valve Advantages:

• Continuous-duty rated coil
• Cartridges are voltage interchangeable
• Optional waterproof E-Coils rated up to IP69K
• Efficient wet-armature construction
• Hardened parts for long life

Usage Method Of 50SD58-30 Solenoid Directional Valve:

1. System Assessment: Analyze your fluid control system’s requirements, including pressure, flow rate, and directional control needs. Verify that the 50SD58-40 Solenoid Directional Valve matches the specifications and is compatible with your application.
2. Mounting and Connection: Select the appropriate mounting method based on your system layout and available space. Install the valve securely, ensuring proper alignment with the fluid lines. Connect the valve to the system using compatible fittings and connectors, ensuring tight and leak-free connections.
3. Electrical Connection: Following the manufacturer’s instructions, connect the valve’s solenoid to the appropriate power supply. Ensure correct wiring and adhere to safety guidelines during the electrical connection process.
4. Testing and Adjustment: Gradually introduce fluid flow to the system and monitor the valve’s performance. Test different operating conditions, including pressure and flow variations, and adjust the valve settings to achieve optimal control and system functionality.

How To Replace Delta Single Handle Valve Cartridge?

Replacing the cartridge in a Delta single-handle valve is a relatively straightforward process that can help resolve issues such as leaks or temperature control problems. Here’s a step-by-step guide on how to replace a Delta single-handle valve cartridge:

1. Gather the necessary tools: Before you begin, make sure you have the following tools ready: adjustable wrench, Phillips screwdriver, needle-nose pliers, and a replacement cartridge specific to your Delta single-handle valve model.
2. Turn off the water supply: Locate the main water shut-off valve for your home and turn it off to stop the water flow to the shower or faucet. If there is no dedicated shut-off valve for the bathroom, you may need to shut off the main water supply.
3. Remove the handle: Locate the set screw on the handle, usually located under a decorative cap or button. Use a Phillips screwdriver to remove the set screw, then pull the handle straight off.
4. Remove the trim sleeve and escutcheon plate: Next, remove the trim sleeve and escutcheon plate, which are usually located around the valve body. These components may be threaded or held in place with screws. Unscrew or remove any screws and gently pull or twist the sleeve and escutcheon plate to detach them from the wall.
5. Remove the bonnet nut: The bonnet nut secures the cartridge in place. Use an adjustable wrench to loosen and remove the bonnet nut by turning it counterclockwise. Be cautious not to damage the surrounding plumbing or valve body.
6. Remove the old cartridge: Once the bonnet nut is removed, you can now pull the old cartridge straight out of the valve body. If it’s stuck, you can use needle-nose pliers or a cartridge removal tool for added leverage.
7. Install the new cartridge: Take the replacement Delta cartridge and align it with the valve body, ensuring that any tabs or notches match up correctly. Gently push the cartridge into the valve body until it fits snugly.
8. Reassemble the valve: Once the new cartridge is installed, reassemble the valve by following the steps in reverse order. Place the bonnet nut back onto the valve body and tighten it with an adjustable wrench. Be careful not to overtighten.
9. Reinstall the trim sleeve, escutcheon plate, and handle: Slide the trim sleeve and escutcheon plate back onto the valve body and secure them in place with screws or by threading them back on. Finally, reattach the handle by aligning it with the cartridge stem and securing it with the set screw.
10. Test for leaks and functionality: Turn the water supply back on and test the shower or faucet. Check for any leaks around the valve and ensure that the hot and cold water controls are working correctly. If necessary, make any adjustments to the cartridge or connections to resolve any issues.

Capability & Capacity Of Factory:

(1) Assembly

We have a first-class independent research and development assembly platform. The hydraulic cylinder production workshop has four semi-automatic lifting cylinder assembly lines and one automatic tilt cylinder assembly line, with a designed annual production capacity of 1 million pieces. The special cylinder workshop is equipped with various specifications of a semi-automatic cleaning assembly system with a designed annual production capacity of 200,000 and equipped with famous CNC machining equipment, a machining center, a high-precision cylinder processing special equipment, a robot welding machine, an automatic cleaning machine, automatic cylinder assembly machine, and automatic painting production line. Existing critical equipment of more than 300 sets (sets). The optimal allocation and efficient use of equipment resources ensure the accuracy requirements of products and meet the high-quality needs of products.

(2) Machining

The machining shop is equipped with a customized inclined rail turning center, machining center, high-speed honing machine, welding robot, and other related equipment, which can handle the processing of cylinder tubes with a maximum inner diameter of 400mm and a maximum length of 6 meters.

(3) Welding

(4) Painting & coating

With small and medium-sized cylinder automatic water-based paint coating lines, to achieve automatic robot loading and unloading and automatic spraying, the design capacity of 4000 pieces per shift;
Mums ir arī pusautomātiska krāsu ražošanas līnija lieliem baloniem, ko darbina ķēdes piedziņa, ar 60 kastu konstrukcijas jaudu vienā maiņā.

(5) Testēšana

Mums ir augstākās klases pārbaudes iekārtas un testēšanas stendi, lai nodrošinātu, ka balona veiktspēja atbilst prasībām.

We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding lauksaimniecības pārnesumkārbas. Mēs esam eksportējuši savus produktus klientiem visā pasaulē un esam ieguvuši labu reputāciju, pateicoties mūsu izcilajai produktu kvalitātei un pēcpārdošanas servisam. Mēs aicinām klientus no valsts un ārvalstīm sazināties ar mums, lai risinātu biznesa sarunas, apmainītos ar informāciju un... sadarboties ar mums!