Mobilā celtņa pacelšanas cilindrs
The mobile crane luffing cylinder is essential in mobile crane systems and is designed to enhance these powerful machines’ vertical reach and lifting efficiency. This hydraulic cylinder plays a crucial role in adjusting the angle of the crane’s boom, allowing operators to extend or retract the boom smoothly and precisely.
The mobile crane luffing cylinder is vital for enhancing the vertical reach, lifting efficiency, and overall performance of mobile cranes. With its robust construction, precise angle adjustment, extended vertical space, and improved lifting capacity, this hydraulic cylinder empowers operators to navigate challenging construction sites and industrial environments with ease and safety. By following the recommended usage methods and maintenance practices, operators can maximize the longevity and performance of the mobile crane luffing cylinder, contributing to increased productivity, efficiency, and operator confidence in completing various lifting tasks. Invest in this essential hydraulic component to elevate the capabilities of your mobile crane, ensuring successful and efficient operations in diverse construction and industrial applications.
Mobile Crane Luffing Cylinder Key Characteristics:
- Izturīga konstrukcija:
- The mobile crane luffing cylinder is built with high-quality materials, ensuring durability, strength, and resistance to heavy loads and harsh environmental conditions.
- It is designed to withstand the rigors of demanding construction sites and maintain optimal performance over extended periods.
- Precise Angle Adjustment:
- This hydraulic cylinder enables precise angle adjustment of the crane’s boom, providing operators with fine control over vertical reach and positioning.
- It offers smooth and responsive movement, allowing for accurate load placement and minimizing the risk of collisions or accidents.
- Extended Vertical Reach:
- The mobile crane luffing cylinder extends the crane’s vertical reach by adjusting the angle of the boom.
- It enhances the crane’s flexibility in accessing elevated work areas, such as high-rise construction sites or industrial installations.
- Lifting Efficiency:
- By optimizing the angle of the boom, the luffing cylinder enhances the lifting efficiency of the mobile crane.
- It allows for better load distribution, reducing stress on the crane’s components and improving overall lifting capacity.
Mobile Crane Luffing Cylinder Parameter:
| Produkta nosaukums | Mobilā celtņa pacelšanas cilindrs |
| Funkcijas: | Strēles augšupvērstās un lejupvērstās rotācijas apzināšanās ir galvenais celšanas virzītājspēks |
| Urbuma diametrs: | 100mm～560mm |
| Stieņa diametrs: | 50mm～480mm Stroke≤5000 mm |
| Spiediens: | Maximum 36MPa |
| Lufēšanas cilindra pielietojumi: | Mobilais celtnis |
Mobilā celtņa identifikācijas shēma:
Usage Method Of Mobile Crane Luffing Cylinder:
- Drošības pasākumi:
- Before operating the mobile crane, ensure all safety guidelines and regulations are followed.
- Conduct a thorough inspection of the crane and its components, including the luffing cylinder, to ensure they are in proper working condition.
- Iepazīstieties ar vadības ierīcēm:
- Izprotiet sava mobilā celtņa modeļa vadības mehānismus un darbības procedūras.
- Identify the control for adjusting the luffing angle and ensure it functions properly.
- Luffing Angle Adjustment:
- Activate the control for the luffing cylinder, typically located in the operator’s cabin.
- Use the control to extend or retract the boom, adjusting the luffing angle as required for the lifting operation.
- Follow the load charts and manufacturer’s guidelines for the appropriate luffing angles based on the load weight and radius.
- Load Placement and Monitoring:
- Once the desired luffing angle is achieved, carefully position the load using the crane’s other controls, such as the hoist and swing mechanisms.
- Continuously monitor the load and adjust the luffing angle to maintain stability and safety during the lifting operation.
Kā atbrīvot spiedienu hidrauliskajā sistēmā?
Releasing pressure from a hydraulic system is a necessary safety procedure that should be followed whenever maintenance or repair work is performed. Here are the general steps to release pressure from a hydraulic system:
- Identificējiet barošanas avotu:
- Determine the power source supplying pressure to the hydraulic system, such as an electric motor, an engine-driven pump, or a manual pump.
- Locate the power switch or control valve associated with the power source.
- Izslēdziet barošanas avotu:
- Turn off the power switch or control valve to stop the power source from supplying pressure to the hydraulic system.
- If an engine powers the hydraulic system, shut off the engine completely.
- Engage the System Controls:
- Operate the control valves or switches on the hydraulic system to move actuators or components to neutral or resting positions.
- This step helps relieve residual pressure and allows the hydraulic fluid to flow back to the reservoir.
- Release Pressure at the Pump:
- If the hydraulic system has a pump with a pressure relief valve, locate the valve.
- Turn the pressure relief valve counterclockwise (or as specified by the manufacturer) to release pressure gradually.
- If available, check the system pressure gauge to ensure that pressure is relieved.
- Bleed Air from the System:
- Some hydraulic systems may have air trapped within the system, which can cause pressure buildup.
- To release air, open the air bleed valves or loosen fittings strategically to allow air to escape.
- Start from the lowest points in the system and work your way up to the highest points.
- Keep bleeding the system until a steady flow of hydraulic fluid is observed without air bubbles.
- Pārbaudiet spiediena atbrīvošanu:
- Check the pressure gauge, if available, to ensure that the pressure has been fully released.
- Double-check the system controls to ensure that all actuators and components are neutral or resting.
Rūpnīcas iespējas un jauda:
(1) Montāža
Mums ir pirmklasīga neatkarīga pētniecības un attīstības montāžas platforma. Hidraulisko cilindru ražošanas darbnīcā ir četras pusautomātiskas pacelšanas cilindru montāžas līnijas un viena automātiskā slīpuma cilindru montāžas līnija ar projektēto gada ražošanas jaudu 1 miljons vienību. Speciālo cilindru darbnīca ir aprīkota ar dažādu specifikāciju pusautomātisku tīrīšanas montāžas sistēmu ar projektēto gada ražošanas jaudu 200 000 vienību un aprīkota ar slavenām CNC apstrādes iekārtām, apstrādes centru, augstas precizitātes cilindru apstrādes speciālo aprīkojumu, robotizētu metināšanas iekārtu, automātisku tīrīšanas iekārtu, automātisku cilindru montāžas iekārtu un automātisku krāsošanas ražošanas līniju. Esošais kritiskais aprīkojums ir vairāk nekā 300 komplektu (komplektu). Optimāla iekārtu resursu sadale un efektīva izmantošana nodrošina produktu precizitātes prasības un apmierina produktu augstās kvalitātes prasības.
(2) Apstrāde
Apstrādes cehs ir aprīkots ar pielāgotu slīpo sliežu virpošanas centru, apstrādes centru, ātrgaitas asināšanas mašīnu, metināšanas robotu un citu saistītu aprīkojumu, kas var apstrādāt cilindriskas caurules ar maksimālo iekšējo diametru 400 mm un maksimālo garumu 6 metri.
(3) Metināšana
(4) Krāsošana un pārklāšana
Ar mazām un vidēja izmēra cilindriskām automātiskām ūdens bāzes krāsu pārklāšanas līnijām, lai panāktu automātisku robotu iekraušanu un izkraušanu un automātisku izsmidzināšanu, projektētā jauda ir 4000 gabali maiņā;
Mums ir arī pusautomātiska krāsu ražošanas līnija lieliem baloniem, ko darbina ķēdes piedziņa, ar 60 kastu konstrukcijas jaudu vienā maiņā.
(5) Testēšana
Mums ir augstākās klases pārbaudes iekārtas un testēšanas stendi, lai nodrošinātu, ka balona veiktspēja atbilst prasībām.
Mēs esam viens no labākajiem hidraulisko cilindru ražotājiem. Mēs varam piedāvāt visaptverošus hidrauliskos cilindrus. Mēs nodrošinām arī atbilstošus lauksaimniecības pārnesumkārbas. Mēs esam eksportējuši savus produktus klientiem visā pasaulē un esam ieguvuši labu reputāciju, pateicoties mūsu izcilajai produktu kvalitātei un pēcpārdošanas servisam. Mēs aicinām klientus no valsts un ārvalstīm sazināties ar mums, lai risinātu biznesa sarunas, apmainītos ar informāciju un... sadarboties ar mums!