Siłownik hydrauliczny FA z przednim kołnierzem i ciężkim tłoczyskiem

The FA front flanged heavy rod hydraulic cylinder is a high-performance component that provides superior power, durability, and reliability in demanding industrial applications. With its robust construction, precise engineering, and advanced features, this heavy rod hydraulic cylinder is a reliable solution for heavy-duty tasks requiring dedicated force output and precise control. From heavy machinery to material handling equipment, FA front-flanged heavy rod hydraulic cylinders are designed to stand out in challenging environments, ensuring optimal performance and productivity.

Heavy Rod Hydraulic Cylinder Key Characteristics:

1. Robust Construction: FA Front flanged heavy rod hydraulic cylinders feature a robust design and high-quality materials such as steel or alloys to withstand heavy loads, extreme pressures, and harsh operating conditions. Its rugged construction ensures long-lasting durability and resistance to wear, corrosion, and damage.

2. High Force Output: With its large piston diameter and high-pressure capability, this heavy rod hydraulic cylinder offers an impressive force output, making it ideal for applications where heavy lifting, pushing, or pulling is required. It ensures efficient performance and enables operators to handle demanding tasks efficiently.

3. Precise Control:  The FA front flanged heavy rod hydraulic cylinder provides precisely controlled linear motion, enabling the operator to achieve accurate positioning and smooth operation. Its advanced design and engineering ensure minimal internal friction and transparent and responsive movement.

FA Front Flange Type Heavy Rod Hydraulic Cylinder Parameter:

Siłownik hydrauliczny FA z przednim kołnierzem i ciężkim tłoczyskiem Usage Method:

Mounting and Connection: Use appropriate brackets or fixtures to safely install the standard heavy-rod hydraulic cylinder safely. During installation, ensure proper alignment and stability. Connect hydraulic lines to cylinder ports according to the manufacturer’s instructions and guidelines.

Hydraulic System Integration: The cylinder is integrated into the hydraulic system by connecting it to a suitable hydraulic pump or power unit. Ensure cylinder specifications and operating requirements are met.

Control and Operation: Use the control valve to regulate the flow of hydraulic oil to and from the cylinder. Adjust the control Settings according to the desired linear motion and force output. Test the movement of the cylinder to verify its function and responsiveness.

Siłownik hydrauliczny FA z przednim kołnierzem i ciężkim tłoczyskiem Maintenance:

Regular maintenance is essential to maximize the lifespan and performance of the Standard Heavy Rod Hydraulic Cylinder. Here are some maintenance guidelines:

Periodic Inspection: Perform routine inspections to identify signs of wear, damage, or leaks. Check cylinder blocks, piston rods, seals, and other components for abnormalities. Resolve any issues promptly to prevent further injury or operational inefficiencies.

Lubrication: Apply the recommended lubricant to the moving parts of the cylinder, including tie rods and seals. Regular lubrication minimizes friction, reduces wear, and ensures smooth operation. Follow the manufacturer’s guidelines for lubrication intervals and appropriate lubricant types.

Seal Replacement: If the seals are aged or leaking, replace the seals with genuine parts approved by the manufacturer. Damaged or worn seals can compromise cylinder performance and lead to hydraulic oil leakage.

Cleaning: Clean cylinders by removing dirt, debris, and other contaminants. Before reassembling, use a non-abrasive cleaner and make sure all parts are dry. Regular cleaning promotes optimal performance and prevents premature wear or damage.

How To Take Apart A Hydraulic Cylinder?

Taking apart a hydraulic cylinder requires careful disassembly to avoid component damage. Here’s a step-by-step guide on how to take apart a hydraulic cylinder:

1. Safety Precautions: Before starting any work on hydraulic cylinders, ensure that the system is depressurized, and the equipment is safely secured to prevent accidental movement. Wear appropriate personal protective equipment (PPE) such as gloves and safety glasses.
2. Identify the Cylinder: Determine the type and design of the hydraulic cylinder you’re working with. Different cylinders may have varying disassembly procedures, so consult the manufacturer’s documentation or guidelines specific to your cylinder model.
3. Cylinder Removal: Disconnect any hydraulic lines connected to the cylinder. Remove any external components, such as mounting brackets or covers that may obstruct access to the cylinder.
4. Drain Hydraulic Fluid: Place a suitable container beneath the cylinder to catch any hydraulic fluid draining during disassembly. Carefully drain the fluid by loosening the fittings or removing the drain plugs.
5. Disassemble End Caps: Identify the cylinder’s end caps, usually located at each end of the cylinder. Remove any retaining bolts, screws, or fasteners securing the end caps in place. Gently tap the end caps with a rubber mallet to loosen them if necessary.
6. Separate End Caps: Once the end cap fasteners are removed, carefully pry off the end caps using a pry bar or a soft-faced mallet. Take note of the orientation and order of any components inside the cylinder as you disassemble it.
7. Remove Piston Assembly: With the end caps removed, the piston assembly should be accessible. Slide the piston out of the cylinder bore not damaging the piston or cylinder walls. If the piston is stubborn, apply a suitable lubricant and use gentle force to facilitate its removal.
8. Inspect and Clean Components: Inspect all disassembled components for signs of wear, damage, or contamination. Clean each component using a suitable cleaner or solvent to remove dirt, debris, or hydraulic fluid residue. Dry the components thoroughly before further inspection or reassembly.
9. Replace Worn or Damaged Parts: If any components show signs of excessive wear or damage, they should be replaced with new ones. Consult the manufacturer’s guidelines or seek professional advice to ensure you select the correct replacement parts.
10. Reassembly: To reassemble the hydraulic cylinder, follow the reverse order of disassembly. Ensure that all components are properly aligned, and that any seals or O-rings are lubricated with hydraulic oil or a compatible lubricant before installation. Tighten fasteners and fittings to the manufacturer’s recommended torque specifications.

Możliwości i pojemność fabryki:

(1) Montaż

Dysponujemy najwyższej klasy niezależną platformą badawczo-rozwojową. Warsztat produkcji siłowników hydraulicznych posiada cztery półautomatyczne linie montażowe siłowników podnoszących i jedną automatyczną linię montażową siłowników przechyłu, o projektowanej rocznej zdolności produkcyjnej 1 miliona sztuk. Specjalny warsztat cylindrów jest wyposażony w różne specyfikacje półautomatycznego systemu montażu czyszczącego o projektowanej rocznej zdolności produkcyjnej 200 000 i wyposażony w słynny sprzęt do obróbki CNC, centrum obróbcze, specjalny sprzęt do precyzyjnej obróbki cylindrów, robot spawalniczy, automatyczna maszyna czyszcząca, automatyczna maszyna do montażu cylindrów i automatyczna linia produkcyjna do malowania. Istniejący krytyczny sprzęt składa się z ponad 300 zestawów. Optymalna alokacja i efektywne wykorzystanie zasobów sprzętowych zapewniają wymagania dotyczące dokładności produktów i spełniają potrzeby wysokiej jakości produktów.

(2) Obróbka

Warsztat obróbki skrawaniem jest wyposażony w niestandardowe centrum tokarskie z pochyloną szyną, centrum obróbcze, szybkobieżną honownicę, robota spawalniczego i inny powiązany sprzęt, który może obsługiwać przetwarzanie rur cylindrycznych o maksymalnej średnicy wewnętrznej 400 mm i maksymalnej długości 6 metrów.

(3) Spawanie

(4) Malowanie i powlekanie

Z małymi i średnimi automatycznymi liniami do powlekania farbami na bazie wody, w celu osiągnięcia automatycznego załadunku i rozładunku robota oraz automatycznego natryskiwania, wydajność projektowa 4000 sztuk na zmianę;
Posiadamy również półautomatyczną linię do produkcji farb do dużych cylindrów napędzaną łańcuchem napędowym, o wydajności 60 skrzyń na zmianę.

(5) Testowanie

Dysponujemy najwyższej klasy urządzeniami kontrolnymi i stanowiskami testowymi, aby zapewnić, że wydajność cylindra spełnia wymagania.

We are one of the best heavy rod hydraulic cylinder manufacturers. We can offer wide heavy rod hydraulic cylinder stock. We also provide corresponding przekładnie rolnicze. We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service. We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information, and współpracować z nami!