Tylna pokrywa Siłownik hydrauliczny z czterema tłoczyskami
Jako jeden z producentów, dostawców i eksporterów produktów mechanicznych, oferujemy cylindry hydrauliczne i wiele innych produktów.
Prosimy o kontakt w celu uzyskania szczegółowych informacji.
Poczta:sales@hydraulic-cylinders.net
Producent dostawca eksporter siłowników hydraulicznych.
Tylna pokrywa Siłownik hydrauliczny z czterema tłoczyskami
The rear cover trunnion four rod hydraulic cylinder is a cutting-edge component designed to provide exceptional power, precise control, and unmatched performance in various industrial applications. With its innovative rear cover trunnion design and four rod configuration, this four rod hydraulic cylinder offers enhanced stability, durability, and load-bearing capacity, making it an indispensable asset in demanding hydraulic systems.
Essential Characteristics Of Four Rod Hydraulic Cylinder:
Rear Cover Trunnion Design:
- The rear cover trunnion design provides a safe and efficient installation solution that ensures reliable operation even under heavy loads and extreme conditions.
- It simplifies installation and can be easily integrated into various hydraulic systems or equipment.
Four Rod Configuration:
- The four rod configuration enhances the bearing capacity of the four rod hydraulic cylinder and ensures optimal stability and precise positioning.
- It enables the four rod hydraulic cylinder to withstand side loads effectively, providing exceptional resistance to torsion and side forces.
High Power Output:
- This four rod hydraulic cylinder has an impressive power output, allowing it to handle heavy loads easily.
- It provides superior power and thrust, making it suitable for applications that require a lot of strength and lifting capacity.
Precise Control:
- The rear cover trunnion four rod hydraulic cylinder provides precise linear motion control to ensure accurate positioning and smooth operation.
- It provides excellent stroke control, enabling operators to achieve the speed and precision required for specific tasks.
Rear Cover Trunnion Four Rod Hydraulic Cylinder Parameter:
Tylna pokrywa Siłownik hydrauliczny z czterema tłoczyskami Usage Method:
Mounting and Installation:
- Consider load requirements and space constraints to determine the appropriate installation location of the hydraulic cylinder within the system or equipment.
- Make sure the mounting surface is clean, level, and able to support the weight of the cylinder.
- Place the rear cover trunnions flush with the mounting face and secure them using recommended bolts or fasteners.
Hydraulic Connections:
- Connect the four rod hydraulic cylinder supply line to the cylinder port to ensure proper sealing to prevent leakage.
- Follow the manufacturer’s recommendations for the type of hydraulic oil and fill the system to the recommended level.
Operation:
- Activate the hydraulic system and control the movement of the cylinder using a hydraulic control valve or other suitable control mechanism.
- Adjust flow and pressure Settings to achieve the desired speed and force output.
- Regularly monitor cylinder operation for any signs of abnormal behavior, such as leaks, overheating, or unusual noise.
Maintenance Of Rear Cover Trunnion Four Rod Hydraulic Cylinder:
- Regular Inspection:
- Perform routine visual inspections to check for signs of wear, leaks, or damage.
- Inspect the rod surface, seals, and mounting connections for any abnormalities and address any issues promptly.
- Lubrication:
- Follow the manufacturer’s guidelines for lubrication intervals and use a recommended lubricant to ensure smooth operation.
- Apply lubrication to the rod, seals, and other moving parts to minimize friction and extend the cylinder’s lifespan.
- Seal Replacement:
- Over time, seals may wear out and require replacement. If leakage is detected, carefully remove the old seals and install new ones according to the manufacturer’s specifications.
How Do You Rebuild A Hydraulic Cylinder?
Rebuilding a hydraulic cylinder involves disassembling the cylinder, inspecting its components, replacing worn or damaged parts, and reassembling it to restore its functionality. Here’s a general step-by-step guide on how to rebuild a hydraulic cylinder:
- Gather the Necessary Tools and Equipment:
- Before starting the rebuild process, gather the required tools, such as wrenches, pliers, a rubber mallet, a cylinder hone, new seals and O-rings, a seal installation tool, and a hydraulic cylinder repair kit.
- Safety Precautions:
- Ensure the hydraulic system is depressurized and the cylinder is disconnected from any power source.
- Use appropriate protective equipment (PPE), such as gloves and safety glasses, to protect yourself during the rebuild.
- Cylinder Disassembly:
- Remove the hydraulic cylinder from the equipment or system.
- Carefully disassemble the cylinder, starting with removing end caps or retaining rings.
- Release the pressure within the cylinder by retracting the rod fully.
- Take note of the sequence of the removed components for accurate reassembly.
- Component Inspection:
- Inspect all cylinder components, including the rod, piston, seals, and bearings, for signs of wear, damage, or corrosion.
- Measure the dimensions of critical components, such as the rod and bore diameter, to ensure they are within specifications.
- Pay close attention to the condition of seals and O-rings, as they are familiar sources of hydraulic cylinder issues.
- Replacement of Worn or Damaged Parts:
- Replace any seals, O-rings, or other damaged components identified during the inspection.
- Ensure the replacement parts are compatible with the cylinder model and meet the required specifications.
- Lubricate the new seals or O-rings with hydraulic oil before installation.
- Cylinder Reassembly:
- Clean all disassembled components thoroughly to remove any dirt or debris.
- Apply a thin film of hydraulic oil to the components during reassembly to provide lubrication.
- Follow the manufacturer’s instructions or repair manual to ensure correct fastener reassembly and torque specifications.
- Testing and Installation:
- Once the cylinder is reassembled, test its functionality by applying hydraulic pressure.
- Check for leaks, abnormal noises, or erratic movements during testing.
- If the cylinder operates smoothly without issues, it can be reinstalled into the equipment or system.
Możliwości i pojemność fabryki:
(1) Montaż
Dysponujemy najwyższej klasy niezależną platformą badawczo-rozwojową. Warsztat produkcji siłowników hydraulicznych posiada cztery półautomatyczne linie montażowe siłowników podnoszących i jedną automatyczną linię montażową siłowników przechyłu, o projektowanej rocznej zdolności produkcyjnej 1 miliona sztuk. Specjalny warsztat cylindrów jest wyposażony w różne specyfikacje półautomatycznego systemu montażu czyszczącego o projektowanej rocznej zdolności produkcyjnej 200 000 i wyposażony w słynny sprzęt do obróbki CNC, centrum obróbcze, specjalny sprzęt do precyzyjnej obróbki cylindrów, robot spawalniczy, automatyczna maszyna czyszcząca, automatyczna maszyna do montażu cylindrów i automatyczna linia produkcyjna do malowania. Istniejący krytyczny sprzęt składa się z ponad 300 zestawów. Optymalna alokacja i efektywne wykorzystanie zasobów sprzętowych zapewniają wymagania dotyczące dokładności produktów i spełniają potrzeby wysokiej jakości produktów.
(2) Obróbka
Warsztat obróbki skrawaniem jest wyposażony w niestandardowe centrum tokarskie z pochyloną szyną, centrum obróbcze, szybkobieżną honownicę, robota spawalniczego i inny powiązany sprzęt, który może obsługiwać przetwarzanie rur cylindrycznych o maksymalnej średnicy wewnętrznej 400 mm i maksymalnej długości 6 metrów.
(3) Spawanie
(4) Malowanie i powlekanie
Z małymi i średnimi automatycznymi liniami do powlekania farbami na bazie wody, w celu osiągnięcia automatycznego załadunku i rozładunku robota oraz automatycznego natryskiwania, wydajność projektowa 4000 sztuk na zmianę;
Posiadamy również półautomatyczną linię do produkcji farb do dużych cylindrów napędzaną łańcuchem napędowym, o wydajności 60 skrzyń na zmianę.
(5) Testowanie
Dysponujemy najwyższej klasy urządzeniami kontrolnymi i stanowiskami testowymi, aby zapewnić, że wydajność cylindra spełnia wymagania.
We are one of the best light four rod hydraulic cylinder manufacturers. We can offer comprehensive light four rod hydraulic cylinder stock. We also provide corresponding przekładnie rolnicze. We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service. We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information, and współpracować z nami!
Zapraszamy na wycieczkę po naszej fabryce VR:
Wybierz się na wycieczkę po naszej fabryce VR z następującymi elementami
Jak działa siłownik hydrauliczny wózka widłowego?
Siłownik hydrauliczny Zastosowanie:
