30SD08-21 Solenoid Directional Valve
It is introducing the 30SD08-21 solenoid directional valve—a cutting-edge hydraulic component designed to deliver precise control and efficient operation in various industrial applications. With its advanced features, reliable performance, and robust construction, this valve offers an optimal solution for directing hydraulic fluid flow.
The 30SD08-21 solenoid directional valve offers precision control and efficient operation for hydraulic systems. With its versatile functionality, high flow capacity, quick response time, and robust construction, this valve provides optimal fluid flow control, enhancing system performance and productivity. By following the recommended usage methods and maintenance guidelines, you can maximize the potential of this valve and achieve improved efficiency in your hydraulic applications. Upgrade your hydraulic system today with the 30SD08-21 solenoid directional valve and experience enhanced control, reliability, and productivity.
30SD08-21 Solenoid Directional Valve Characteristics:
- Versatile Functionality:
- The 30SD08-21 solenoid directional Valve offers versatile functionality, making it suitable for various hydraulic applications.
- It enables precise fluid flow control, allowing efficient operation and improved system performance.
- High Flow Capacity:
- With its high flow capacity, this valve can handle substantial fluid volumes, making it ideal for applications that require large flow rates.
- The valve’s ability to accommodate high flow rates ensures efficient and reliable operation, even in demanding industrial environments.
- Quick Response Time:
- The solenoid technology incorporated in this valve ensures a rapid response time, enabling swift and accurate control of hydraulic fluid flow.
- The quick response time enhances system efficiency and enables precise adjustments during operation.
- Robust Construction:
- The 30SD08-21 solenoid directional valve is built to withstand harsh operating conditions and provide long-lasting performance.
- Its sturdy construction and high-quality materials ensure durability, minimizing downtime and reducing maintenance requirements.
30SD08-21 Solenoid Directional Valve Parameter:
| Rated pressure | 207 bar(3000 psi) | |
| Peak flow | See performance chart | |
| Fluid | Mineral-based or synthetics with lubricating properties | |
| Rango de temperatura del fluido ℃ | -54 a 107 ℃ (Juntas de poliuretano） | |
| -40 a 100 ℃ (Juntas de Buna N） | ||
| -26 en 204 ℃ (Juntas de fluorocarbono) | ||
| Viscosity range | 7.4 to 420 mm2/s | |
| Degree of contamination | The minimum pollution level is ISO4406 level 20/18/14, and level 17/15/13 is recommended to prolong the service life | |
| Internal Leakage | ≤ 0.15 mL/min (3 drops/min) @207bar | |
| Cavity | VC08-2 | |
| Coil Duty Rating | Continuous from 85% to 115% of nominal voltage | |
| Initial Coil Current Draw at 20℃ | 1.4A at 12VDC; 0.7A at 24VDC | |
| Minimum pull-in voltage | 85% of nominal at 207 bar (3000 psi) | |
30SD08-21 Solenoid Directional Valve Advantages:
• Continuous-duty rated coil
• Efficient wet-armature construction
• Cartridges are voltage interchangeable
• Optional waterproof E-Coils rated up to IP69K
• Industry common cavity
• Hardened parts for long life and low leakage
Usage Method Of 30SD08-21 Solenoid Directional Valve:
- System Evaluation:
- Begin by evaluating your hydraulic system’s requirements, including flow rate, pressure, and system dynamics.
- Determine if the 30SD08-21 solenoid directional valve aligns with the specific needs of your system.
- Valve Selection:
- Select the appropriate variant of the 30SD08-21 solenoid directional valve based on your system parameters and performance requirements.
- Consider factors such as flow capacity, pressure ratings, and compatibility with other system components for optimal functionality.
- Installation:
- Follow the manufacturer’s installation instructions carefully to ensure proper placement and secure valve mounting.
- Position the valve correctly within the hydraulic system, considering factors such as fluid flow direction and accessibility for maintenance.
- Electrical Connections:
- Connect the solenoid valve to the appropriate power source according to the manufacturer’s specifications.
- Ensure that the electrical connections are secure and comply with safety standards.
How To Replace Shower Valve Cartridge?
Replacing a shower valve cartridge is a common maintenance task that can restore proper functioning to your shower. Follow the step-by-step instructions below to successfully replace a shower valve cartridge:
- Gather The Necessary Tools And Materials:
- Replacement shower valve cartridge
- Adjustable wrench or pliers
- Screwdriver (Phillips or flathead, depending on your specific shower valve)
- Plumbing grease or lubricant
- Towels or rags to catch any water or debris
- Turn Off The Water Supply:
- Locate the main water shut-off valve for your home and turn it off to stop the water supply to the shower.
- Open the shower faucet to drain any remaining water in the pipes.
- Remove The Handle:
- Depending on the type of shower handle you have, you may need to remove a decorative cap or cover to access the handle screw.
- Use a screwdriver to remove the screw holding the handle in place.
- Gently pull the handle away from the wall to detach it from the valve.
- Remove The Trim Plate Or Escutcheon:
- The trim plate covers the valve assembly and is usually held in place by screws.
- Unscrew and remove the trim plate to expose the valve cartridge.
- Remove The Old Cartridge:
- Look for a retaining nut or clip securing the cartridge in place.
- Use pliers or an adjustable wrench to loosen and remove the retaining nut or clip.
- Once the retaining mechanism is removed, carefully pull the old cartridge straight out of the valve body.
- Note the orientation of the cartridge for proper installation of the replacement.
- Install The New Cartridge:
- Apply a thin layer of plumbing grease or lubricant to the o-rings of the new cartridge to ensure smooth operation.
- Insert the new cartridge into the valve body, aligning it with the same orientation as the old cartridge.
- Firmly push the new cartridge into place until it is fully seated.
- Reassemble The Valve:
- Replace the retaining nut or clip to secure the new cartridge in place.
- Reattach the trim plate or escutcheon and tighten the screws to hold it securely.
- Slide the shower handle back onto the valve stem and tighten the handle screw to secure it.
- Turn on the water supply:
- Slowly turn on the main water supply valve for your home to allow water to flow back into the shower.
- Check for any leaks around the valve and handle. If you notice any leaks, tighten the necessary connections or seek professional assistance.
- Test The Shower:
- Turn on the shower and check for proper water flow and temperature control.
- Adjust the handle as needed to achieve the desired water temperature and flow.
Możliwości i pojemność fabryki:
(1) Montaż
Dysponujemy najwyższej klasy niezależną platformą badawczo-rozwojową. Warsztat produkcji siłowników hydraulicznych posiada cztery półautomatyczne linie montażowe siłowników podnoszących i jedną automatyczną linię montażową siłowników przechyłu, o projektowanej rocznej zdolności produkcyjnej 1 miliona sztuk. Specjalny warsztat cylindrów jest wyposażony w różne specyfikacje półautomatycznego systemu montażu czyszczącego o projektowanej rocznej zdolności produkcyjnej 200 000 i wyposażony w słynny sprzęt do obróbki CNC, centrum obróbcze, specjalny sprzęt do precyzyjnej obróbki cylindrów, robot spawalniczy, automatyczna maszyna czyszcząca, automatyczna maszyna do montażu cylindrów i automatyczna linia produkcyjna do malowania. Istniejący krytyczny sprzęt składa się z ponad 300 zestawów. Optymalna alokacja i efektywne wykorzystanie zasobów sprzętowych zapewniają wymagania dotyczące dokładności produktów i spełniają potrzeby wysokiej jakości produktów.
(2) Obróbka
Warsztat obróbki skrawaniem jest wyposażony w niestandardowe centrum tokarskie z pochyloną szyną, centrum obróbcze, szybkobieżną honownicę, robota spawalniczego i inny powiązany sprzęt, który może obsługiwać przetwarzanie rur cylindrycznych o maksymalnej średnicy wewnętrznej 400 mm i maksymalnej długości 6 metrów.
(3) Spawanie
(4) Malowanie i powlekanie
Z małymi i średnimi automatycznymi liniami do powlekania farbami na bazie wody, w celu osiągnięcia automatycznego załadunku i rozładunku robota oraz automatycznego natryskiwania, wydajność projektowa 4000 sztuk na zmianę;
Posiadamy również półautomatyczną linię do produkcji farb do dużych cylindrów napędzaną łańcuchem napędowym, o wydajności 60 skrzyń na zmianę.
(5) Testowanie
Dysponujemy najwyższej klasy urządzeniami kontrolnymi i stanowiskami testowymi, aby zapewnić, że wydajność cylindra spełnia wymagania.
We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding przekładnie rolnicze. Eksportowaliśmy nasze produkty do klientów na całym świecie i zdobyliśmy dobrą reputację dzięki najwyższej jakości produktów i usług posprzedażnych. Zapraszamy klientów w kraju i za granicą do kontaktu z nami w celu negocjacji biznesowych, wymiany informacji i współpracować z nami!