CA Monoaural Type PHS Fisheye Connector Light Rod Hydraulic Cylinder

The CA Monoaural Type PHS Fisheye Connector Light Rod Hydraulic Cylinder is an innovative hydraulic cylinder designed to deliver enhanced precision, connectivity, and efficiency in industrial applications. This cylinder combines the advantages of a monoaural design, PHS fisheye connector, and light rod construction to provide reliable and high-performance hydraulic power.

Key Characteristics and Benefits Of Light Rod Hydraulic Cylinder:

Monoaural Design: The light rod hydraulic cylinder features a monoaural design with a single rod extending from one end. This design ensures compactness and simplifies installation, making it suitable for applications with limited space.

PHS Fisheye Connector: The PHS fisheye connector is a unique feature of this hydraulic cylinder. It provides a secure and efficient connection between the cylinder and other hydraulic components, ensuring reliable power transmission and minimizing the risk of leaks.

Light Rod Construction: The light rod construction utilizes lightweight materials such as aluminum or composites. This reduces overall weight, enabling faster operation, reduced energy consumption, and improved efficiency.

Enhanced Precision: The CA monoaural type PHS fisheye connector light rod hydraulic cylinder ensures precise linear motion control. It delivers accurate positioning and smooth movement, making it ideal for applications that require high precision, such as robotics, automation systems, and packaging machinery.

CA Monoaural Type PHS Fisheye Connector Light Rod Hydraulic Cylinder Parameter:

CA Monoaural Type Y Connector Light Rod Hydraulic Cylinder Usage Method:

Installation: Use appropriate fasteners to safely install the light rod hydraulic cylinder to ensure stability and proper alignment.

Hydraulic Connection: Use the PHS fisheye connector to connect the hydraulic line to the specified port on the cylinder. Ensure the joint is tight to prevent leakage and ensure efficient power transmission.

Power Supply: Connect the cylinder to a reliable hydraulic power source, such as a pump or power unit, through appropriate hydraulic lines.

Test And Adjust: Thoroughly check all connections and ensure their safety before operation—test cylinder movement by starting the hydraulic system and verifying smooth, linear motion.

CA Monoaural Type Y Connector Light Rod Hydraulic Cylinder Maintenance:

Proper maintenance is essential to maximize the life and performance of the CA monaural PHS fisheye connector light pole hydraulic cylinder. Here are some maintenance guidelines:

Regular Inspection: Check the cylinder for wear, damage, or leakage. Pay attention to seals, fittings, and PHS fisheye joints.
Lubrication: Apply the recommended lubricant to the moving parts of the cylinder, including the rods and seals, according to the manufacturer’s guidelines. Regular lubrication ensures smooth operation and minimizes friction-related problems.

Replace Seals: If seals are deteriorating or leaking, replace seals with authentic parts approved by the manufacturer. Follow appropriate seal replacement procedures.

Cleaning: Keep the cylinder clean and remove dirt, debris, and contaminants that may affect the cylinder’s performance. Before reassembling, use a non-abrasive cleaner and make sure all parts are arid.

How To Remove Hydraulic Cylinder From Front End Loader?

Removing a hydraulic cylinder from a front-end loader typically involves the following steps:

1. Preparation: Ensure the loader is safely parked on a level surface and the engine is turned off. Engage the parking brake and chock the wheels to prevent any unintended movement.
2. Identify the Cylinder: Locate the specific hydraulic cylinder you intend to remove. Front-end loaders usually have multiple hydraulic cylinders for various functions, such as lifting, tilting, or extending the loader arms.
3. Relieve Pressure: Hydraulic systems operate under high pressure, so relieving the stress before disconnecting any hydraulic components is essential. Start by using the loader controls to lower or retract the cylinder fully. Then, shut off the engine to prevent accidental activation of the hydraulic system.
4. Disconnect Hydraulic Lines: Locate the hydraulic lines connected to the cylinder. Depending on the specific setup, one or two hydraulic lines may be connected to the cylinder. Use tools like wrenches or socket sets to loosen and disconnect the hydraulic fittings from the cylinder. Be prepared for some hydraulic fluid to leak during this process, so have a drain pan or absorbent material ready.
5. Remove Mounting Hardware: Examine the mounting points of the hydraulic cylinder. Typically, cylinders are secured by bolts or pins. Use the appropriate tools to remove these fasteners and detach the cylinder from its mounting points. Keep track of any washers or spacers that may be present during removal.
6. Remove the Cylinder: Once the hydraulic lines and mounting hardware are disconnected, carefully slide or lift the cylinder out of its position. Hydraulic cylinders can be heavy, so exercise caution and use proper lifting techniques or equipment to prevent injury.
7. Inspection and Maintenance: With the cylinder removed, it’s a good opportunity to inspect it for any signs of damage, wear, or leaks. If necessary, perform maintenance tasks such as replacing seals or repairing any issues before reinstalling the cylinder.

Capability & Capacity Of Factory:

(1) Assembly

We have a first-class independent research and development assembly platform. The hydraulic cylinder production workshop has four semi-automatic lifting cylinder assembly lines and one automatic tilt cylinder assembly line, with a designed annual production capacity of 1 million pieces. The special cylinder workshop is equipped with various specifications of a semi-automatic cleaning assembly system with a designed annual production capacity of 200,000 and equipped with famous CNC machining equipment, a machining center, a high-precision cylinder processing special equipment, a robot welding machine, an automatic cleaning machine, automatic cylinder assembly machine, and automatic painting production line. Existing critical equipment of more than 300 sets (sets). The optimal allocation and efficient use of equipment resources ensure the accuracy requirements of products and meet the high-quality needs of products.

(2) Machining

The machining shop is equipped with a customized inclined rail turning center, machining center, high-speed honing machine, welding robot, and other related equipment, which can handle the processing of cylinder tubes with a maximum inner diameter of 400mm and a maximum length of 6 meters.

(3) Welding

(4) Painting & coating

With small and medium-sized cylinder automatic water-based paint coating lines, to achieve automatic robot loading and unloading and automatic spraying, the design capacity of 4000 pieces per shift;
We also have a semi-automatic paint production line for large cylinders powered by a power chain, with 60 cases per shift design capacity.

(5) Testing

We have first-class inspection facilities and test beds to ensure that the performance of the cylinder meets the requirements.

We are one of the best light rod hydraulic cylinder manufacturers. We can offer wide light rod hydraulic cylinder stock. We also provide corresponding agricultural gearboxes. We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service. We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information, and cooperate with us!