DBE6X(E) Series Proportional Pressure Relief Valve

The DBE6X(E) series proportional pressure relief valve is a cutting-edge hydraulic component designed to provide precise and efficient pressure control in various industrial applications. With its advanced features, exceptional performance, and robust construction, this valve offers a solution that optimizes system efficiency and enhances overall performance.

The DBE6X(E) series proportional pressure relief valve offers precise and efficient pressure control for hydraulic systems. With exceptional proportional control, pressure relief function, high flow capacity, and versatility, this valve provides accurate pressure regulation, safeguards system components, and enhances overall performance. By following the recommended usage methods and maintenance guidelines, you can harness the full potential of this valve and achieve optimal results in your hydraulic applications. Upgrade your pressure control system today with the DBE6X(E) series proportional pressure relief valve and experience enhanced performance and reliability.

DBE6X(E) Series Proportional Pressure Relief Valve Characteristics:

1. Proportional Control:

• The DBE6X(E) series valve boasts exceptional proportional control capabilities, allowing precise adjustment of pressure levels.
• This advanced control feature ensures accurate pressure regulation tailored to specific system requirements, facilitating efficient and optimized performance.

2. Pressure Relief Function:

• Equipped with a pressure relief function, this valve effectively regulates pressure by diverting excess fluid flow to maintain a desired setpoint.
• By relieving excess pressure, the valve protects system components from potential damage, ensuring reliable and safe operation.

3. High Flow Capacity:

• The DBE6X(E) series valve is engineered to handle high flow rates, making it suitable for applications requiring substantial fluid volumes.
• Its high flow capacity ensures efficient operation even in demanding industrial environments.

4. Versatility:

• This valve offers versatility in system integration and is compatible with a wide range of hydraulic setups and applications.
• Its adaptability allows for seamless incorporation into existing systems, minimizing downtime and enhancing overall productivity.

DBE6X(E) Series Proportional Pressure Relief Valve Parameter:

DBE6X(E) Series Proportional Pressure Relief Valve Advantages:

• Pilot valve to restrict system pressure (control oil internal only)
• Can adjust by controlling the coil current according to the characteristic curve and the selected electronic control unit
• Solenoid type Imax=0.8 A or 2.5 A
• In the event of electronic control unit failure, the overload protection can function to the highest degree (coil current > Imax)
• Used in valve sub-plate mounting, installation hole follows ISO 441-03-02-0-94，
• Cable sockets follows DIN 43650-AM2
• External electronic control unit with ramp and valve adjustment function VT-SSPA1-508/525-L2X/V0/*

Usage Method Of DBE6X(E) Series Proportional Pressure Relief Valve:

1. System Evaluation:

• Begin by assessing your hydraulic system’s requirements, considering flow rate, pressure range, and system dynamics.
• Determine whether the proportional pressure control offered by the DBE6X(E) series valve aligns with your system’s needs.

2. Valve Selection:

• Select the appropriate variant of the DBE6X(E) series valve based on your system parameters and performance requirements.
• Consider factors like flow capacity, pressure range, and compatibility with other system components to ensure optimal functionality.

3. Installation:

• Follow the manufacturer’s installation instructions carefully to ensure proper placement and secure valve mounting.
• Position the valve correctly within the hydraulic system, considering factors such as fluid flow direction and accessibility for maintenance.

4. Pressure Setting:

• Set the desired pressure level by adjusting the valve’s control mechanism according to the manufacturer’s guidelines.
• Ensure that the setpoint aligns with the specific requirements of your system.

How To Change A Shower Valve Cartridge?

Changing a shower valve cartridge is a relatively straightforward process that can help resolve issues such as leaks, inconsistent water temperature, or low water pressure. Here’s a step-by-step guide on how to change a shower valve cartridge:

1. Gather The Necessary Tools And Materials:
   • Replacement shower valve cartridge
   • Adjustable wrench or pliers
   • Screwdriver (if required)
   • Pipe thread tape or plumber’s putty (if needed)
   • Towels or rags
2. Turn Off The Water Supply:
   • Locate the main water supply valve for your shower and shut it off. This valve is typically found near the water meter or in the basement.
3. Prepare The Work Area:
   • Lay towels or rags in the shower to catch any water or debris that may fall during the process.
   • Remove any shower handles or trim covers to access the valve cartridge. This may involve unscrewing or prying off the cover, depending on the specific shower model.
4. Remove The Existing Cartridge:
   • Use an adjustable wrench or pliers to loosen and remove the cartridge retaining nut.
   • Once the nut is removed, carefully pull out the old cartridge from the valve body. In some cases, you may need to use a screwdriver to gently pry it loose.
5. Install The New Cartridge:
   • Take the replacement cartridge and align it with the valve body, ensuring that any tabs or grooves match up.
   • Push the cartridge firmly into the valve body until it is fully seated.
6. Reassemble The Shower:
   • Place the cartridge retaining nut back onto the valve body and tighten it securely with an adjustable wrench or pliers. Be careful not to overtighten, as it may damage the cartridge or valve.
   • Reattach the shower handle or trim cover, securing it in place according to the manufacturer’s instructions.
7. Turn On The Water Supply:
   • Slowly turn the main water supply valve back on and allow the water to flow through the shower to check for any leaks or issues.
   • If you notice any leaks, tighten the cartridge retaining nut slightly until the leak stops. Be cautious not to overtighten.
8. Test The Shower:
   • Turn on the shower and verify that the water flows properly, adjusting the temperature and pressure as needed.
   • Check for any leaks around the cartridge or handle and make any necessary adjustments or repairs.

Aptidão e capacidade da fábrica:

(1) Montagem

Temos uma plataforma de montagem de pesquisa e desenvolvimento independente de primeira classe. A oficina de produção de cilindros hidráulicos tem quatro linhas de montagem semiautomáticas de cilindros de elevação e uma linha de montagem automática de cilindros de inclinação, com uma capacidade de produção anual projetada de 1 milhão de peças. A oficina de cilindros especiais é equipada com várias especificações de um sistema de montagem de limpeza semiautomática com uma capacidade de produção anual projetada de 200.000 peças e equipada com famosos equipamentos de usinagem CNC, um centro de usinagem, um equipamento especial de processamento de cilindros de alta precisão, uma máquina de solda robotizada, uma máquina de limpeza automática, uma máquina de montagem automática de cilindros e uma linha de produção de pintura automática. O equipamento crítico existente é de mais de 300 conjuntos (conjuntos). A alocação ideal e o uso eficiente dos recursos do equipamento garantem os requisitos de precisão dos produtos e atendem às necessidades de alta qualidade dos produtos.

(2) Usinagem

A oficina de usinagem é equipada com um centro de torneamento de trilho inclinado personalizado, um centro de usinagem, uma máquina de brunimento de alta velocidade, um robô de soldagem e outros equipamentos relacionados, que podem lidar com o processamento de tubos de cilindros com diâmetro interno máximo de 400 mm e comprimento máximo de 6 metros.

(3) Soldagem

(4) Pintura e revestimento

Com linhas de revestimento de tinta à base de água automáticas de cilindros de pequeno e médio porte, para obter carregamento e descarregamento automáticos de robôs e pulverização automática, a capacidade projetada é de 4.000 peças por turno;
Também temos uma linha de produção de tinta semiautomática para cilindros grandes, acionada por uma corrente elétrica, com capacidade de projeto de 60 caixas por turno.

(5) Testes

Temos instalações de inspeção e bancos de teste de primeira classe para garantir que o desempenho do cilindro atenda aos requisitos.

We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding caixas de câmbio agrícolas. Exportamos nossos produtos para clientes em todo o mundo e conquistamos uma boa reputação devido à qualidade superior de nossos produtos e ao serviço pós-venda. Convidamos clientes nacionais e estrangeiros a entrar em contato conosco para negociar negócios, trocar informações e cooperar conosco!