Cilindro hidráulico de quatro hastes do munhão da tampa traseira

The rear cover trunnion four rod hydraulic cylinder is a cutting-edge component designed to provide exceptional power, precise control, and unmatched performance in various industrial applications. With its innovative rear cover trunnion design and four rod configuration, this four rod hydraulic cylinder offers enhanced stability, durability, and load-bearing capacity, making it an indispensable asset in demanding hydraulic systems.

Essential Characteristics Of Four Rod Hydraulic Cylinder:

Rear Cover Trunnion Design:

1. • The rear cover trunnion design provides a safe and efficient installation solution that ensures reliable operation even under heavy loads and extreme conditions.
   • It simplifies installation and can be easily integrated into various hydraulic systems or equipment.

Four Rod Configuration:

1. • The four rod configuration enhances the bearing capacity of the four rod hydraulic cylinder and ensures optimal stability and precise positioning.
   • It enables the four rod hydraulic cylinder to withstand side loads effectively, providing exceptional resistance to torsion and side forces.

High Power Output:

1. • This four rod hydraulic cylinder has an impressive power output, allowing it to handle heavy loads easily.
   • It provides superior power and thrust, making it suitable for applications that require a lot of strength and lifting capacity.

Precise Control:

• • The rear cover trunnion four rod hydraulic cylinder provides precise linear motion control to ensure accurate positioning and smooth operation.
  • It provides excellent stroke control, enabling operators to achieve the speed and precision required for specific tasks.

Rear Cover Trunnion Four Rod Hydraulic Cylinder Parameter:

Cilindro hidráulico de quatro hastes do munhão da tampa traseira Método de uso:

Mounting and Installation:

1. • Consider load requirements and space constraints to determine the appropriate installation location of the hydraulic cylinder within the system or equipment.
   • Make sure the mounting surface is clean, level, and able to support the weight of the cylinder.
   • Place the rear cover trunnions flush with the mounting face and secure them using recommended bolts or fasteners.

Hydraulic Connections:

1. • Connect the four rod hydraulic cylinder supply line to the cylinder port to ensure proper sealing to prevent leakage.
   • Follow the manufacturer’s recommendations for the type of hydraulic oil and fill the system to the recommended level.

Operation:

• • Activate the hydraulic system and control the movement of the cylinder using a hydraulic control valve or other suitable control mechanism.
  • Adjust flow and pressure Settings to achieve the desired speed and force output.
  • Regularly monitor cylinder operation for any signs of abnormal behavior, such as leaks, overheating, or unusual noise.

Maintenance Of Rear Cover Trunnion Four Rod Hydraulic Cylinder:

1. Regular Inspection:
   • Perform routine visual inspections to check for signs of wear, leaks, or damage.
   • Inspect the rod surface, seals, and mounting connections for any abnormalities and address any issues promptly.
2. Lubrication:
   • Follow the manufacturer’s guidelines for lubrication intervals and use a recommended lubricant to ensure smooth operation.
   • Apply lubrication to the rod, seals, and other moving parts to minimize friction and extend the cylinder’s lifespan.
3. Seal Replacement:
   • Over time, seals may wear out and require replacement. If leakage is detected, carefully remove the old seals and install new ones according to the manufacturer’s specifications.

How Do You Rebuild A Hydraulic Cylinder？

Rebuilding a hydraulic cylinder involves disassembling the cylinder, inspecting its components, replacing worn or damaged parts, and reassembling it to restore its functionality. Here’s a general step-by-step guide on how to rebuild a hydraulic cylinder:

1. Gather the Necessary Tools and Equipment:
   • Before starting the rebuild process, gather the required tools, such as wrenches, pliers, a rubber mallet, a cylinder hone, new seals and O-rings, a seal installation tool, and a hydraulic cylinder repair kit.
2. Precauções de segurança:
   • Ensure the hydraulic system is depressurized and the cylinder is disconnected from any power source.
   • Use appropriate protective equipment (PPE), such as gloves and safety glasses, to protect yourself during the rebuild.
3. Desmontagem do cilindro:
   • Remove the hydraulic cylinder from the equipment or system.
   • Carefully disassemble the cylinder, starting with removing end caps or retaining rings.
   • Release the pressure within the cylinder by retracting the rod fully.
   • Take note of the sequence of the removed components for accurate reassembly.
4. Component Inspection:
   • Inspect all cylinder components, including the rod, piston, seals, and bearings, for signs of wear, damage, or corrosion.
   • Measure the dimensions of critical components, such as the rod and bore diameter, to ensure they are within specifications.
   • Pay close attention to the condition of seals and O-rings, as they are familiar sources of hydraulic cylinder issues.
5. Replacement of Worn or Damaged Parts:
   • Replace any seals, O-rings, or other damaged components identified during the inspection.
   • Ensure the replacement parts are compatible with the cylinder model and meet the required specifications.
   • Lubricate the new seals or O-rings with hydraulic oil before installation.
6. Cylinder Reassembly:
   • Clean all disassembled components thoroughly to remove any dirt or debris.
   • Apply a thin film of hydraulic oil to the components during reassembly to provide lubrication.
   • Follow the manufacturer’s instructions or repair manual to ensure correct fastener reassembly and torque specifications.
7. Testing and Installation:
   • Once the cylinder is reassembled, test its functionality by applying hydraulic pressure.
   • Check for leaks, abnormal noises, or erratic movements during testing.
   • If the cylinder operates smoothly without issues, it can be reinstalled into the equipment or system.

Aptidão e capacidade da fábrica:

(1) Montagem

Temos uma plataforma de montagem de pesquisa e desenvolvimento independente de primeira classe. A oficina de produção de cilindros hidráulicos tem quatro linhas de montagem semiautomáticas de cilindros de elevação e uma linha de montagem automática de cilindros de inclinação, com uma capacidade de produção anual projetada de 1 milhão de peças. A oficina de cilindros especiais é equipada com várias especificações de um sistema de montagem de limpeza semiautomática com uma capacidade de produção anual projetada de 200.000 peças e equipada com famosos equipamentos de usinagem CNC, um centro de usinagem, um equipamento especial de processamento de cilindros de alta precisão, uma máquina de solda robotizada, uma máquina de limpeza automática, uma máquina de montagem automática de cilindros e uma linha de produção de pintura automática. O equipamento crítico existente é de mais de 300 conjuntos (conjuntos). A alocação ideal e o uso eficiente dos recursos do equipamento garantem os requisitos de precisão dos produtos e atendem às necessidades de alta qualidade dos produtos.

(2) Usinagem

A oficina de usinagem é equipada com um centro de torneamento de trilho inclinado personalizado, um centro de usinagem, uma máquina de brunimento de alta velocidade, um robô de soldagem e outros equipamentos relacionados, que podem lidar com o processamento de tubos de cilindros com diâmetro interno máximo de 400 mm e comprimento máximo de 6 metros.

(3) Soldagem

(4) Pintura e revestimento

Com linhas de revestimento de tinta à base de água automáticas de cilindros de pequeno e médio porte, para obter carregamento e descarregamento automáticos de robôs e pulverização automática, a capacidade projetada é de 4.000 peças por turno;
Também temos uma linha de produção de tinta semiautomática para cilindros grandes, acionada por uma corrente elétrica, com capacidade de projeto de 60 caixas por turno.

(5) Testes

Temos instalações de inspeção e bancos de teste de primeira classe para garantir que o desempenho do cilindro atenda aos requisitos.

We are one of the best light four rod hydraulic cylinder manufacturers. We can offer comprehensive light four rod hydraulic cylinder stock. We also provide corresponding caixas de câmbio agrícolas. Exportamos nossos produtos para clientes em todo o mundo e conquistamos uma boa reputação devido à qualidade superior de nossos produtos e ao serviço pós-venda. Damos as boas-vindas aos clientes nacionais e estrangeiros que queiram entrar em contato conosco para negociar negócios, trocar informações e cooperar conosco!