30SD10-42 Solenoid Directional Valve

The 30SD10-42 solenoid directional valve is a cutting-edge hydraulic component that offers unmatched efficiency and control in various applications. Designed with precision engineering and advanced technology, this valve ensures seamless directional control of hydraulic fluid, allowing for precise and reliable operation in various industries. From industrial machinery to mobile equipment, the 30SD10-42 solenoid directional valve is a trusted solution for optimizing hydraulic systems.

The 30SD10-42 solenoid directional valve is a game-changer for hydraulic systems, providing unparalleled efficiency, control, and reliability. By following the proper usage and maintenance guidelines, you can optimize the performance and longevity of this valve. Invest in the 30SD10-42 solenoid directional valve today and experience the benefits of enhanced precision and efficiency in your hydraulic systems.

30SD10-42 Solenoid Directional Valve Characteristics:

• Precision Control: With its advanced design and technology, the valve ensures precise and reliable directional control of hydraulic fluid, allowing for smooth and efficient operation.
• Durability: Built with high-quality materials and subjected to rigorous testing, the valve is designed to withstand demanding environments and provide long-lasting performance.
• Versatility: The valve’s versatile design suits various applications across industries, including industrial machinery and mobile equipment.
• Efficient Flow Control: The valve’s optimized flow path minimizes pressure drop, enhancing the hydraulic system’s efficiency.
• Safety Features: The valve incorporates safety mechanisms such as pressure relief and overload protection, ensuring the security of equipment and personnel during operation.

30SD10-42 Solenoid Directional Valve Parameter:

Rated pressure	207 bar(3000 psi)
Peak flow	See performance chart
Fluid	Mineral-based or synthetics with lubricating properties
Fluid temperature range ℃	-54 to 107 ℃ (Polyurethane seals)
	-40 to 100 ℃ (Buna N seals)
	-26 to 204 ℃ (Fluorocarbon seals)
Viscosity range	7.4 to 420 mm2/s
Degree of contamination	The minimum pollution level is ISO4406 level 20/18/14, and level 17/15/13 is recommended to prolong the service life
Internal Leakage	≤ 82 mL/min@207bar
Cavity	VC10-4
Coil Duty Rating	Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20℃	E-coil	1.7A at 12VDC; 0.85A at 24VDC
	D-coil	1.67A at 12VDC; 0.83A at 24VDC
Minimum pull-in voltage	85% of nominal at 207 bar

30SD10-42 Solenoid Directional Valve Advantages:

• Continuous-duty rated coil
• Cartridges are voltage interchangeable
• Optional waterproof E-Coils rated up to IP69K
• Efficient wet-armature construction
• Industry common cavity
• Hardened parts for long life

Usage Method Of 30SD10-42 Solenoid Directional Valve:

• Installation: Begin by ensuring that your hydraulic system is powered off and depressurized. Identify the appropriate location for the valve and securely mount it using the recommended mounting techniques, ensuring proper alignment.
• Connection: Connect the hydraulic lines to the designated inlet and outlet ports of the valve. Ensure that all connections are tight, leak-free, and properly sealed to prevent fluid loss.
• Electrical Wiring: Wire the solenoid valve to the control system using the specified electrical connections. Follow the manufacturer’s instructions to ensure proper voltage, polarity, and grounding.
• System Calibration: Power on the hydraulic system and activate the control mechanism. Adjust the control settings to calibrate the valve’s performance according to your specific application requirements.
• Operation: Engage the control mechanism to activate the 30SD10-42 Solenoid Directional Valve. Experience the precision and efficiency as the valve directs hydraulic fluid flow, enabling seamless operation of your machinery or equipment.

How To Identify Delta Shower Valve Cartridge?

Identifying a Delta shower valve cartridge can be essential when it comes to troubleshooting or replacing a faulty cartridge in your Delta shower system. Here are the steps to help you identify the Delta shower valve cartridge:

1. Turn off the Water: Before starting any work on your shower, make sure to turn off the water supply to the shower. You can typically find the shut-off valve near the shower or in the main water supply line of your house.
2. Remove the Handle: Depending on the type of Delta shower faucet you have, the handle removal method may vary. Most Delta shower handles have a small cap covering the screw that holds the handle in place. Use a flathead screwdriver to pry off the cap. Once the screw is exposed, use a screwdriver to remove it and gently pull off the handle.
3. Remove the Trim Plate: After removing the handle, you’ll find a trim plate or escutcheon surrounding the valve. This plate is usually secured with screws or is a threaded piece that can be unscrewed. Use a screwdriver or pliers to remove the screws or twist the trim plate counterclockwise to remove it.
4. Identify the Cartridge: With the trim plate removed, you will now have access to the cartridge. The cartridge is a cylindrical component that controls the flow and temperature of the water. Delta shower cartridges come in different types, so it’s important to identify the specific cartridge you have.
   • Single-Handle Cartridge: If you have a single-handle Delta shower faucet, the cartridge will usually be a single unit with a round or hexagonal top. It may also have a colored cap, such as blue or red, indicating hot or cold water.
   • Dual-Handle Cartridge: For dual-handle Delta shower faucets, you will have two separate cartridges—one for hot water and one for cold water. These cartridges typically have a stem with a square or hexagonal top.
5. Note the Cartridge Model: Once you have identified the cartridge, take note of its model number or series. This information is usually imprinted on the side of the cartridge or can be found in the documentation that came with your Delta shower system.
6. Replace or Troubleshoot: If you need to replace the cartridge, having the model number or series will help you find the exact replacement cartridge. You can visit a local plumbing supply store or contact Delta customer service for assistance. If you’re experiencing specific issues with your shower, such as leaks or temperature control problems, knowing the cartridge model will also aid in troubleshooting the problem.

Aptidão e capacidade da fábrica:

(1) Montagem

Temos uma plataforma de montagem de pesquisa e desenvolvimento independente de primeira classe. A oficina de produção de cilindros hidráulicos tem quatro linhas de montagem semiautomáticas de cilindros de elevação e uma linha de montagem automática de cilindros de inclinação, com uma capacidade de produção anual projetada de 1 milhão de peças. A oficina de cilindros especiais é equipada com várias especificações de um sistema de montagem de limpeza semiautomática com uma capacidade de produção anual projetada de 200.000 peças e equipada com famosos equipamentos de usinagem CNC, um centro de usinagem, um equipamento especial de processamento de cilindros de alta precisão, uma máquina de solda robotizada, uma máquina de limpeza automática, uma máquina de montagem automática de cilindros e uma linha de produção de pintura automática. O equipamento crítico existente é de mais de 300 conjuntos (conjuntos). A alocação ideal e o uso eficiente dos recursos do equipamento garantem os requisitos de precisão dos produtos e atendem às necessidades de alta qualidade dos produtos.

(2) Usinagem

A oficina de usinagem é equipada com um centro de torneamento de trilho inclinado personalizado, um centro de usinagem, uma máquina de brunimento de alta velocidade, um robô de soldagem e outros equipamentos relacionados, que podem lidar com o processamento de tubos de cilindros com diâmetro interno máximo de 400 mm e comprimento máximo de 6 metros.

(3) Soldagem

(4) Pintura e revestimento

Com linhas de revestimento de tinta à base de água automáticas de cilindros de pequeno e médio porte, para obter carregamento e descarregamento automáticos de robôs e pulverização automática, a capacidade projetada é de 4.000 peças por turno;
Também temos uma linha de produção de tinta semiautomática para cilindros grandes, acionada por uma corrente elétrica, com capacidade de projeto de 60 caixas por turno.

(5) Testes

Temos instalações de inspeção e bancos de teste de primeira classe para garantir que o desempenho do cilindro atenda aos requisitos.

 

 

We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding caixas de câmbio agrícolas. Exportamos nossos produtos para clientes em todo o mundo e conquistamos uma boa reputação devido à qualidade superior de nossos produtos e ao serviço pós-venda. Convidamos clientes nacionais e estrangeiros a entrar em contato conosco para negociar negócios, trocar informações e cooperar conosco!