35SD10-47A Solenoid Directional Valve

The 35SD10-47A solenoid directional valve is a high-performance hydraulic component designed to provide exceptional efficiency and precise control in various applications. With advanced engineering and cutting-edge technology, this valve allows for seamless directional control of hydraulic fluid, enabling reliable operation in various industries. From industrial machinery to mobile equipment, the 35SD10-47A solenoid directional valve is the trusted solution for optimizing hydraulic systems.

The 35SD10-47A solenoid directional valve offers exceptional hydraulic systems efficiency, control, and durability. Its precise directional control capabilities, robust construction, and easy installation make it an excellent choice for various applications. By following the recommended maintenance practices, you can ensure optimal performance and extend the lifespan of this valve. Invest in the 35SD10-47A solenoid directional valve today and experience enhanced efficiency and control in your hydraulic systems.

35SD10-47A Solenoid Directional Valve Characteristics:

• Robust Construction: The 35SD10-47A solenoid directional valve is built to withstand demanding environments. Constructed from high-quality materials, it offers exceptional durability and longevity, ensuring reliable performance even in harsh conditions.
• High Flow Capacity: This valve boasts a high flow capacity, enabling efficient and rapid movement of hydraulic fluid. It facilitates quick response times and enhances the overall productivity of hydraulic systems.
• Precise Control: The 35SD10-47A solenoid directional valve allows precise control over the direction of hydraulic flow. It offers excellent accuracy and repeatability, ensuring your hydraulic system operates strictly as intended.
• Low Pressure Drop: With its optimized design, this valve minimizes pressure drop, maximizing the efficiency of your hydraulic system. It allows for smooth fluid flow without unnecessary energy losses.

35SD10-47A Solenoid Directional Valve Parameter:

35SD10-47A Solenoid Directional Valve Advantages:

• Continuous-duty rated coil
• Cartridges are voltage interchangeable
• Optional waterproof E-Coils rated up to IP69K
• Efficient wet-armature construction
• Industry common cavity
• Hardened parts for long life

Maintenance Of 35SD10-47A Solenoid Directional Valve:

Using the 35SD10-47A Solenoid Directional Valve is straightforward and user-friendly. Here’s a step-by-step guide to get you started:

1. System Preparation: Ensure the hydraulic system is appropriately set up and all necessary components are in place.
2. Mounting: Install the 35SD10-47A solenoid directional valve in the desired location within the hydraulic system and secure it tightly using appropriate mounting brackets or fasteners.
3. Plumbing Connections: Connect the hydraulic lines to the designated ports on the valve. Ensure proper alignment and tighten the connections to prevent any leaks.
4. Electrical Connections: Connect the solenoid valve to the electrical power supply. Follow the wiring diagram provided with the valve to connect the wires and ensure safe operation correctly.
5. Test and Adjust: Once the valve is installed and connected, test its functionality by activating the solenoid and observing the directional control of the hydraulic fluid. Make any necessary adjustments to ensure proper operation.

How To Remove A Moen Shower Valve Cartridge?

Removing a Moen shower valve cartridge is a crucial step when replacing or repairing your shower valve. Here’s a step-by-step guide to help you remove the cartridge:

1. Gather the Required Tools: Before starting, gather the necessary tools, including an adjustable wrench, pliers, a cartridge puller (if needed), and a screwdriver.
2. Turn Off the Water Supply: Locate the main water shut-off valve for your house and turn it off to stop the water flow to the shower. If you have a dedicated shut-off valve for the shower, you can use that instead.
3. Remove the Handle and Trim: Remove the handle by locating the set screw or screw cover on the handle and using a screwdriver or Allen wrench to loosen and remove it. Once the screw is removed, pull the handle off. Next, remove the trim plate or escutcheon surrounding the valve using a screwdriver.
4. Identify the Retaining Clip: Behind the trim plate, you will find a retaining clip or pin that holds the cartridge in place. This clip might be circular or horseshoe-shaped, depending on the Moen shower valve model.
5. Remove the Retaining Clip: Use pliers to grip the retaining clip and carefully pull it out. Be cautious as the clip may spring out when released. Set the clip aside for reinstallation later.
6. Extract the Cartridge: With the retaining clip removed, the cartridge is ready to be taken out. Grasp the cartridge firmly with pliers or use a cartridge puller if necessary. Slowly and steadily pull the cartridge straight out of the valve body.
7. Clean and Inspect: Once the cartridge is removed, inspect it for any signs of damage or wear. Also, take a moment to clean the valve body and remove any debris or buildup that may affect the new cartridge’s performance.

Aptidão e capacidade da fábrica:

(1) Montagem

Temos uma plataforma de montagem de pesquisa e desenvolvimento independente de primeira classe. A oficina de produção de cilindros hidráulicos tem quatro linhas de montagem semiautomáticas de cilindros de elevação e uma linha de montagem automática de cilindros de inclinação, com uma capacidade de produção anual projetada de 1 milhão de peças. A oficina de cilindros especiais é equipada com várias especificações de um sistema de montagem de limpeza semiautomática com uma capacidade de produção anual projetada de 200.000 peças e equipada com famosos equipamentos de usinagem CNC, um centro de usinagem, um equipamento especial de processamento de cilindros de alta precisão, uma máquina de solda robotizada, uma máquina de limpeza automática, uma máquina de montagem automática de cilindros e uma linha de produção de pintura automática. O equipamento crítico existente é de mais de 300 conjuntos (conjuntos). A alocação ideal e o uso eficiente dos recursos do equipamento garantem os requisitos de precisão dos produtos e atendem às necessidades de alta qualidade dos produtos.

(2) Usinagem

A oficina de usinagem é equipada com um centro de torneamento de trilho inclinado personalizado, um centro de usinagem, uma máquina de brunimento de alta velocidade, um robô de soldagem e outros equipamentos relacionados, que podem lidar com o processamento de tubos de cilindros com diâmetro interno máximo de 400 mm e comprimento máximo de 6 metros.

(3) Soldagem

(4) Pintura e revestimento

Com linhas de revestimento de tinta à base de água automáticas de cilindros de pequeno e médio porte, para obter carregamento e descarregamento automáticos de robôs e pulverização automática, a capacidade projetada é de 4.000 peças por turno;
Também temos uma linha de produção de tinta semiautomática para cilindros grandes, acionada por uma corrente elétrica, com capacidade de projeto de 60 caixas por turno.

(5) Testes

Temos instalações de inspeção e bancos de teste de primeira classe para garantir que o desempenho do cilindro atenda aos requisitos.

We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding caixas de câmbio agrícolas. Exportamos nossos produtos para clientes em todo o mundo e conquistamos uma boa reputação devido à qualidade superior de nossos produtos e ao serviço pós-venda. Convidamos clientes nacionais e estrangeiros a entrar em contato conosco para negociar negócios, trocar informações e cooperar conosco!