HM3V Series Axial Piston Variable Displacement Motor

The HM3V series axial piston variable displacement hydraulic motor is a cutting-edge product that delivers exceptional performance and versatility in hydraulic systems. With its advanced features, reliable construction, and precise control, this hydraulic motor sets new standards in the industry.

The HM3V series axial piston variable displacement hydraulic motor is a powerful and efficient solution for hydraulic systems. Its variable displacement capability, high power-to-size ratio, and precise control offer unparalleled performance and versatility. By following the recommended usage methods and adhering to regular maintenance practices, the HM3V series motor will continue to deliver outstanding power and efficiency. Harness the power and efficiency of the HM3V series axial piston variable displacement hydraulic motor to elevate the performance of your hydraulic system.

HM3V Series Axial Piston Variable Displacement Hydraulic Motor Key Characteristics:

• Variable Displacement Capability:
  • The HM3V series motor incorporates variable displacement technology, enabling operators to adjust the motor’s displacement and output to match specific application requirements.
  • This feature provides enhanced control, efficiency, and versatility, making it suitable for various hydraulic systems.
• High Power-to-Size Ratio:
  • Despite its compact size, the HM3V series motor offers an impressive power-to-size ratio, delivering substantial power output while occupying minimal space.
  • This characteristic is particularly advantageous in applications with limited installation area or weight restrictions.
• Efficient Performance:
  • The axial piston design of the HM3V series motor ensures efficient power transmission, minimizing energy losses and maximizing overall system efficiency.
  • This results in reduced fuel consumption, lower operating costs, and improved environmental sustainability.
• Precise Speed Control:
  • The HM3V series motor provides precise control over motor speed, allowing operators to match the output speed to the desired application requirements.
  • This level of control ensures optimal performance, smooth operation, and increased productivity.

HM3V Series Axial Piston Variable Displacement Hydraulic Motor Parameter:

HM3V Series Axial Piston Variable Displacement Hydraulic Motor Advantages:

• Applied in closed circuit hydraulic systems
• Insertion design, compact installation space, facilitating wheelside application
• Double digit variable motor integrates servo variable piston, can set the minimum displacement of the motor
• Oil orifices of the motor are concentrated on one side to facilitate installation and circuit configuring

HM3V Series Axial Piston Variable Displacement Hydraulic Motor Application:

Usage Method Of HM3V Series Axial Piston Variable Displacement Hydraulic Motor:

• Mounting and Integration:
  • Select an appropriate location within the hydraulic system to mount the HM3V Series axial piston variable displacement hydraulic motor.
  • Ensure proper alignment and securely mount the motor using suitable brackets or accessories.
  • Connect the motor to the hydraulic system using compatible fittings and hoses, ensuring tight and leak-free connections.
• Displacement Adjustment:
  • Familiarize yourself with the displacement adjustment mechanism provided with the HM3V series motor.
  • Depending on the specific model, it may offer manual adjustment or electronic control options.
  • Understand the recommended adjustment procedures and settings to optimize motor performance for your application.
• System Integration:
  • Integrate the HM3V series motor into the hydraulic system by connecting it to other components, such as pumps, valves, and actuators.
  • Ensure the motor’s displacement and performance are compatible with the system requirements.
• Load Considerations:
  • Consider the load requirements of your application when using the HM3V series motor.
  • Ensure the motor’s power and torque ratings align with the intended task.
  • Avoid overloading the motor to prevent excessive wear and potential damage.

Como desmontar um cilindro hidráulico?

Taking apart a hydraulic cylinder requires careful handling and adherence to safety precautions. Here’s a general guide on how to disassemble a hydraulic cylinder:

1. Preparation:
   • Ensure that the hydraulic system is depressurized and the cylinder is not under any load.
   • Use appropriate personal protective equipment, such as gloves and safety glasses, to protect yourself from potential hazards.
2. Remove External Components:
   • Identify and remove any external components attached to the hydraulic cylinder, such as mounting brackets, hoses, and fittings.
   • Please take note of their positions and connections for reassembly later.
3. Secure the Cylinder:
   • Secure the cylinder in a vise or suitable holding fixture to prevent it from moving during disassembly.
   • Ensure the vise or fixture does not damage or deform the cylinder body.
4. Remove Cylinder End Caps:
   • Hydraulic cylinders typically have two end caps: the cap end and the rod end.
   • Use tools like wrenches or sockets to carefully loosen and remove the end cap bolts or retaining nuts.
   • Slowly and evenly release the pressure on both end caps to prevent sudden movement or damage.
5. Release the Piston:
   • Once the end caps are removed, the piston will be accessible.
   • Gently tap the piston or apply controlled pressure to one side to start releasing it from the cylinder barrel.
   • Slowly slide the piston out of the cylinder barrel, not damaging the piston seal or barrel surface.
6. Inspect and Clean Components:
   • Inspect all disassembled components, including the piston, piston seals, rod, and cylinder barrel, for signs of wear, damage, or contamination.
   • Clean the components using an appropriate solvent or cleaning agent to remove dirt, debris, and old lubricants.
   • Be cautious not to use solvents that could damage seals or other sensitive components.

Aptidão e capacidade da fábrica:

(1) Montagem

Temos uma plataforma de montagem de pesquisa e desenvolvimento independente de primeira classe. A oficina de produção de cilindros hidráulicos tem quatro linhas de montagem semiautomáticas de cilindros de elevação e uma linha de montagem automática de cilindros de inclinação, com uma capacidade de produção anual projetada de 1 milhão de peças. A oficina de cilindros especiais é equipada com várias especificações de um sistema de montagem de limpeza semiautomática com uma capacidade de produção anual projetada de 200.000 peças e equipada com famosos equipamentos de usinagem CNC, um centro de usinagem, um equipamento especial de processamento de cilindros de alta precisão, uma máquina de solda robotizada, uma máquina de limpeza automática, uma máquina de montagem automática de cilindros e uma linha de produção de pintura automática. O equipamento crítico existente é de mais de 300 conjuntos (conjuntos). A alocação ideal e o uso eficiente dos recursos do equipamento garantem os requisitos de precisão dos produtos e atendem às necessidades de alta qualidade dos produtos.

(2) Usinagem

A oficina de usinagem é equipada com um centro de torneamento de trilho inclinado personalizado, um centro de usinagem, uma máquina de brunimento de alta velocidade, um robô de soldagem e outros equipamentos relacionados, que podem lidar com o processamento de tubos de cilindros com diâmetro interno máximo de 400 mm e comprimento máximo de 6 metros.

(3) Soldagem

(4) Pintura e revestimento

Com linhas de revestimento de tinta à base de água automáticas de cilindros de pequeno e médio porte, para obter carregamento e descarregamento automáticos de robôs e pulverização automática, a capacidade projetada é de 4.000 peças por turno;
Também temos uma linha de produção de tinta semiautomática para cilindros grandes, acionada por uma corrente elétrica, com capacidade de projeto de 60 caixas por turno.

(5) Testes

Temos instalações de inspeção e bancos de teste de primeira classe para garantir que o desempenho do cilindro atenda aos requisitos.

We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding caixas de câmbio agrícolas. Exportamos nossos produtos para clientes em todo o mundo e conquistamos uma boa reputação devido à qualidade superior de nossos produtos e ao serviço pós-venda. Convidamos clientes nacionais e estrangeiros a entrar em contato conosco para negociar negócios, trocar informações e cooperar conosco!