V30D Series Axial Piston Variable Displacement Hydraulic Pump

The V30D series axial piston variable displacement hydraulic pump is a state-of-the-art solution designed to deliver exceptional performance and efficiency in various hydraulic applications. With its advanced engineering, versatile design, and precise control, this hydraulic pump is a game-changer in the industry.

The V30D series axial piston variable displacement hydraulic pump sets a new standard for efficiency and performance in hydraulic systems. With its variable displacement technology, high performance, and versatile design, this pump offers superior control and optimized energy utilization. By following the recommended usage methods and adhering to regular maintenance practices, the V30D series pump will continue to deliver exceptional efficiency and power, contributing to the success of various industrial applications. Harness the power and efficiency of the V30D series axial piston variable displacement hydraulic pump to elevate the performance of your hydraulic system.

V30D Series Axial Piston Variable Displacement Hydraulic PumpKey Characteristics:

• Variable Displacement Technology: The V30D series pump incorporates cutting-edge variable displacement technology, allowing it to adjust the pump’s output based on the system’s demand. This feature ensures optimal energy utilization, resulting in increased efficiency and reduced power consumption.
• High Performance: This hydraulic pump sets new benchmarks in terms of performance. With a wide range of operating pressures and speeds, the V30D Series Pump provides precise control and efficient power delivery, enabling superior system performance and productivity.
• Versatile Design: The V30D series pump is designed to accommodate various hydraulic systems and applications. It offers flexibility in mounting options, fluid compatibility, and control methods, making it suitable for a wide range of industries and machinery.
• Efficiency at Any Load: The V30D series pump ensures efficiency across a wide range of loads thanks to its variable displacement feature. It automatically adjusts the output to match the system’s requirements, minimizing energy losses and maximizing productivity.

V30D Series Axial Piston Variable Displacement Hydraulic Pump Parameter:

V30D Series Axial Piston Variable Displacement Hydraulic Pump Advantages:

• Applied in open circuit hydraulic systems
• Low noise
• Multiple control modules
• Provides sufficient torque for the rear pump when a tandem pump application is required

V30D Series Axial Piston Variable Displacement Hydraulic Pump Application:

Usage Method Of V30D Series Axial Piston Variable Displacement Hydraulic Pump:

• Installation and Integration: Choose an appropriate location within the hydraulic system to install the V30D series axial piston variable displacement hydraulic pump. Ensure proper alignment and securely mount the pump using suitable brackets or accessories. Connect the pump to the hydraulic system using compatible fittings and hoses, ensuring leak-free connections.
• Fluid Compatibility: Verify that the hydraulic fluid used in the system is compatible with the V30D series pump. Refer to the manufacturer’s recommended fluid type, viscosity, and temperature range. Regularly monitor and maintain the hydraulic fluid to ensure optimal pump operation and longevity.
• Control and Adjustment: Familiarize yourself with the control options provided with the V30D series pump. Depending on the specific model, it may offer various control methods such as manual, proportional, or electronic control. Understand the recommended control settings and adjust them accordingly to optimize pump performance.
• System Optimization: The V30D series pump allows system optimization by adjusting the pump’s displacement to match the load requirements. Take advantage of this feature to maximize energy efficiency and overall system performance.

How To Bleed A Hydraulic Cylinder Without Bleeder Valve?

Bleeding a hydraulic cylinder without a bleeder valve can be a bit more challenging, but it is still possible. Here’s a step-by-step guide on how to bleed a hydraulic cylinder without a bleeder valve:

1. Safety First: Before working on the hydraulic cylinder, ensure that the system is depressurized. Please turn off the power supply and relieve any residual pressure by activating the pressure release valve or operating the system to its maximum extension or retraction point.
2. Position the Cylinder: Place the hydraulic cylinder in a position where air bubbles can easily rise to the highest point. This typically means having the cylinder vertically with the rod pointing upward.
3. Remove the Fitting: Locate the fitting that connects the hydraulic line to the cylinder. Use appropriate tools to disconnect the fitting and remove it. Be prepared for some hydraulic fluid to leak out during this process, so have a container or rags ready to catch any spills.
4. Raise the Cylinder: If possible, raise the cylinder to its maximum extension position. This helps minimize the amount of air trapped inside the cylinder.
5. Tap the Cylinder: Lightly tap the sides of the cylinder with a rubber mallet or a soft-faced hammer. This helps dislodge any air bubbles that may be trapped inside the cylinder. Start from the bottom and work your way up, tapping around the cylinder’s circumference.
6. Cycle the Cylinder: Operate the hydraulic system to cycle the cylinder a few times. Extend and retract the cylinder fully, allowing the hydraulic fluid to flow through and potentially push out any air bubbles. Repeat this process several times to ensure thorough bleeding.
7. Reconnect the Fitting: Once you have cycled the cylinder and feel that most of the air has been purged, reconnect the fitting to the hydraulic line. Ensure it is tightened securely but not overtightened, as it may damage the fitting or cause leaks.
8. Test the Cylinder: After bleeding the cylinder, test its operation by extending and retracting it fully. Monitor the cylinder for any signs of air bubbles or abnormal behavior. If you notice any issues, repeat the bleeding process or seek assistance from a hydraulic professional.

Aptidão e capacidade da fábrica:

(1) Montagem

Temos uma plataforma de montagem de pesquisa e desenvolvimento independente de primeira classe. A oficina de produção de cilindros hidráulicos tem quatro linhas de montagem semiautomáticas de cilindros de elevação e uma linha de montagem automática de cilindros de inclinação, com uma capacidade de produção anual projetada de 1 milhão de peças. A oficina de cilindros especiais é equipada com várias especificações de um sistema de montagem de limpeza semiautomática com uma capacidade de produção anual projetada de 200.000 peças e equipada com famosos equipamentos de usinagem CNC, um centro de usinagem, um equipamento especial de processamento de cilindros de alta precisão, uma máquina de solda robotizada, uma máquina de limpeza automática, uma máquina de montagem automática de cilindros e uma linha de produção de pintura automática. O equipamento crítico existente é de mais de 300 conjuntos (conjuntos). A alocação ideal e o uso eficiente dos recursos do equipamento garantem os requisitos de precisão dos produtos e atendem às necessidades de alta qualidade dos produtos.

(2) Usinagem

A oficina de usinagem é equipada com um centro de torneamento de trilho inclinado personalizado, um centro de usinagem, uma máquina de brunimento de alta velocidade, um robô de soldagem e outros equipamentos relacionados, que podem lidar com o processamento de tubos de cilindros com diâmetro interno máximo de 400 mm e comprimento máximo de 6 metros.

(3) Soldagem

(4) Pintura e revestimento

Com linhas de revestimento de tinta à base de água automáticas de cilindros de pequeno e médio porte, para obter carregamento e descarregamento automáticos de robôs e pulverização automática, a capacidade projetada é de 4.000 peças por turno;
Também temos uma linha de produção de tinta semiautomática para cilindros grandes, acionada por uma corrente elétrica, com capacidade de projeto de 60 caixas por turno.

(5) Testes

Temos instalações de inspeção e bancos de teste de primeira classe para garantir que o desempenho do cilindro atenda aos requisitos.

We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding caixas de câmbio agrícolas. Exportamos nossos produtos para clientes em todo o mundo e conquistamos uma boa reputação devido à qualidade superior de nossos produtos e ao serviço pós-venda. Convidamos clientes nacionais e estrangeiros a entrar em contato conosco para negociar negócios, trocar informações e cooperar conosco!