4WRZ/H(E) Series Pilot Operated Proportional Directional Hydraulic Valve

The 4WRZ/H(E) series pilot-operated proportional directional hydraulic valve is a state-of-the-art component designed to provide exceptional precision, control, and efficiency in hydraulic systems. With its advanced pilot-operated proportional control technology, this valve enables accurate flow regulation and seamless directional changes.

The 4WRZ/H(E) series pilot-operated proportional directional hydraulic valve empowers hydraulic systems with precise flow control, versatile directional changes, and energy efficiency. Its pilot-operated proportional control technology ensures accurate and responsive flow adjustment, while the high flow capacity guarantees reliable performance even in demanding applications. By following the recommended usage methods and maintenance guidelines, you can maximize the benefits and longevity of the 4WRZ/H(E) series valve, elevating your hydraulic system to new levels of precision and control. Upgrade your hydraulic setup today and experience the power of the 4WRZ/H(E) series pilot-operated proportional directional hydraulic valve.

4WRZ/H(E) Series Pilot Operated Proportional Directional Hydraulic Valve Key Characteristics:

1. Pilot-Operated Proportional Control

• The 4WRZ/H(E) series valve utilizes pilot-operated proportional control technology, allowing precise and proportional flow adjustment based on control signals.
• This feature ensures accurate and responsive control, resulting in improved system performance, reduced energy consumption, and enhanced productivity.

2. Versatile Directional Control

• This valve offers versatile control over hydraulic fluid direction, making it suitable for a wide range of applications.
• It enables seamless activation and deactivation of hydraulic components such as cylinders, motors, and actuators in different directions, enhancing system flexibility and adaptability.

3. High Flow Capacity

• The 4WRZ/H(E) series valve is engineered to handle high flow rates, making it ideal for applications that require substantial hydraulic power.
• Its robust construction ensures reliable performance even under demanding conditions, providing consistent and efficient flow control.

4. Eficiență energetică

• By incorporating pilot-operated proportional control, this valve minimizes pressure drops and optimizes energy usage.
• It helps reduce energy consumption, resulting in cost savings and environmental benefits.

4WRZ/H(E) Series Pilot Operated Proportional Directional Hydraulic Valve Parameter:

4WRZ/H(E) Series Pilot Operated Proportional Directional Hydraulic Valve Advantages:

• Pilot-operated two-stage proportional directional valve, used to control the size and direction of the liquid flow
• Threaded connection type proportional solenoid, the coil can be disassembled separately
• Sub-plate mounting connection structure, connection size conforms to DIN2430 and ISO4401 standards
• Aliniere a arcului bobinei
• WRZE type with integrated proportional amplifierr
• WRZ type external amplifier (order separately)

Usage Method Of 4WRZ/H(E) Series Pilot Operated Proportional Directional Hydraulic Valve:

1. System Evaluation

• Evaluate your hydraulic system and identify the specific flow and directional control requirements.
• Determine if the 4WRZ/H(E) series valve is suitable based on its flow capacity, pressure rating, and compatibility with your system.

2. Valve Selection

• Select the appropriate variant of the 4WRZ/H(E) series valve based on your system parameters, flow requirements, and directional control needs.
• Luați în considerare factori precum debitul maxim, presiunea nominală, timpul de răspuns și condițiile de funcționare.

3. Instalare

• Follow the manufacturer’s installation instructions carefully, ensuring proper alignment and secure mounting of the valve.
• Make leak-free connections and ensure the correct flow direction alignment to guarantee optimal performance.

4. Control Signal Connection

• Connect the control signal wires of the valve to a suitable control device, such as a proportional amplifier or electronic control unit.
• Ensure proper wiring and compatibility between the valve and the control device for accurate and responsive control.

How To Bleed Hydraulic Control Valve?

Bleeding a hydraulic control valve is an essential maintenance procedure to remove any trapped air or gas from the system, ensuring optimal performance and efficiency. Here’s a step-by-step guide on how to bleed a hydraulic control valve:

1. Pregătiți sistemul:
   • Ensure that the hydraulic system is turned off and that the pressure is relieved. This step is crucial for your safety and to prevent any accidental movement or release of high-pressure fluids.
   • Locate the bleeder valve or bleed screw on the hydraulic control valve. It is typically located on the top or side of the valve body and may have a protective cap or cover.
2. Positioning and Safety Measures:
   • Place a suitable container or absorbent material beneath the bleed valve to catch any fluid that may be expelled during the bleeding process.
   • Wear appropriate personal protective equipment (PPE), such as safety goggles and gloves, to protect yourself from hydraulic fluid splashes.
3. Opening the Bleed Valve:
   • Using an appropriate wrench or tool, carefully loosen the bleed valve or screw counterclockwise. Be cautious not to fully remove it at this stage.
   • The bleed valve may have an O-ring or sealing washer. Take note of its position and ensure it is in good condition.
4. System Activation:
   • Activate the hydraulic system by turning on the power source, such as an engine or hydraulic pump.
   • Operate the control mechanism associated with the hydraulic control valve, such as a joystick or lever, to allow fluid flow through the valve.
5. Bleeding Process:
   • Slowly open the bleed valve by turning it counterclockwise until you start to see hydraulic fluid or air bubbles escaping from the valve.
   • Allow the fluid to flow for a few seconds or until you observe a steady stream of fluid without any air bubbles. This indicates that the air has been purged from the system.
   • Be cautious not to open the bleed valve too much, as it may lead to excessive fluid loss or system damage.
6. Closing the Bleed Valve:
   • Once you have successfully bled the system, close the bleed valve by turning it clockwise. Ensure it is tightened securely but avoid over-tightening.
   • Check for any leaks around the bleed valve or other connections. If you notice any leaks, address them promptly to prevent further issues.
7. System Check:
   • Turn off the hydraulic system and inspect the fluid level in the reservoir. Add hydraulic fluid as necessary to maintain the recommended level.
   • Test the operation of the hydraulic control valve and associated components to ensure proper functionality.

Capabilitatea și capacitatea fabricii:

(1) Montaj

Avem o platformă de asamblare independentă de cercetare și dezvoltare de primă clasă. Atelierul de producție a cilindrilor hidraulici are patru linii de asamblare semiautomate pentru cilindri de ridicare și o linie de asamblare automată a cilindrilor de înclinare, cu o capacitate de producție anuală proiectată de 1 milion de bucăți. Atelierul de cilindri speciali este echipat cu diverse specificații ale unui sistem de asamblare semi-automat de curățare, cu o capacitate de producție anuală proiectată de 200.000 și dotat cu echipamente celebre de prelucrare CNC, un centru de prelucrare, un echipament special de prelucrare a cilindrilor de înaltă precizie, o mașină de sudură robotizată, o mașină de curățare automată, o mașină de asamblare automată a cilindrilor și o linie de producție automată de vopsire. Echipamente critice existente de peste 300 de seturi (seturi). Alocarea optimă și utilizarea eficientă a resurselor de echipamente asigură cerințele de precizie ale produselor și satisface nevoile de înaltă calitate ale produselor.

(2) Prelucrare

Atelierul de prelucrare este echipat cu un centru de strunjire cu șină înclinată personalizat, un centru de prelucrare, o mașină de honuire de mare viteză, un robot de sudură și alte echipamente conexe, care pot gestiona prelucrarea tuburilor cilindrice cu un diametru interior maxim de 400 mm și o lungime maximă de 6 metri.

(3) Sudură

(4) Vopsire și acoperire

Cu linii automate de acoperire cu vopsea pe bază de apă cu cilindru de dimensiuni mici și medii, pentru a realiza încărcarea și descărcarea automată a robotului și pulverizarea automată, capacitatea de proiectare de 4000 de bucăți pe schimb;
Avem, de asemenea, o linie de producție semi-automată de vopsire pentru cilindri mari, acționată de un lanț de putere, cu o capacitate de proiectare de 60 de cutii pe schimb.

(5) Testarea

Dispunem de instalații de inspecție și bancuri de testare de primă clasă pentru a ne asigura că performanța cilindrului îndeplinește cerințele.

Suntem unul dintre cei mai buni producători de cilindri hidraulici. Putem oferi o gamă completă de cilindri hidraulici. De asemenea, oferim... cutii de viteze agricoleNe-am exportat produsele către clienți din întreaga lume și ne-am câștigat o bună reputație datorită calității superioare a produselor noastre și a serviciilor post-vânzare. Îi invităm pe clienții din țară și din străinătate să ne contacteze pentru a negocia afaceri, a face schimb de informații și... să coopereze cu noi!