Selectează o Pagină

Capacul din spate Buton cu patru tije Cilindru hidraulic cu patru tije

Fiind unul dintre producătorii, furnizorii și exportatorii de cilindri hidraulici, oferim cilindri hidraulici și multe alte produse.

Vă rugăm să luați legătura cu noi pentru detalii.

Mail:sales@hydraulic-cylinders.net

Producător, furnizor, exportator de cilindri hidraulici.

Capacul din spate Buton cu patru tije Cilindru hidraulic cu patru tije

The rear cover trunnion four rod hydraulic cylinder is a cutting-edge component designed to provide exceptional power, precise control, and unmatched performance in various industrial applications. With its innovative rear cover trunnion design and four rod configuration, this four rod hydraulic cylinder offers enhanced stability, durability, and load-bearing capacity, making it an indispensable asset in demanding hydraulic systems.

Caracteristicile esențiale ale cilindrului hidraulic cu patru tije:

Rear Cover Trunnion Design:

    • The rear cover trunnion design provides a safe and efficient installation solution that ensures reliable operation even under heavy loads and extreme conditions.
    • It simplifies installation and can be easily integrated into various hydraulic systems or equipment.

Four Rod Configuration:

    • The four rod configuration enhances the bearing capacity of the four rod hydraulic cylinder and ensures optimal stability and precise positioning.
    • It enables the four rod hydraulic cylinder to withstand side loads effectively, providing exceptional resistance to torsion and side forces.

High Power Output:

    • This four rod hydraulic cylinder has an impressive power output, allowing it to handle heavy loads easily.
    • It provides superior power and thrust, making it suitable for applications that require a lot of strength and lifting capacity.

Precise Control:

    • The rear cover trunnion four rod hydraulic cylinder provides precise linear motion control to ensure accurate positioning and smooth operation.
    • It provides excellent stroke control, enabling operators to achieve the speed and precision required for specific tasks.

Rear Cover Trunnion Four Rod Hydraulic Cylinder Parameter:

Capacul din spate Buton cu patru tije Cilindru hidraulic cu patru tije Usage Method:

Mounting and Installation:

    • Consider load requirements and space constraints to determine the appropriate installation location of the hydraulic cylinder within the system or equipment.
    • Make sure the mounting surface is clean, level, and able to support the weight of the cylinder.
    • Place the rear cover trunnions flush with the mounting face and secure them using recommended bolts or fasteners.

Hydraulic Connections:

    • Connect the four rod hydraulic cylinder supply line to the cylinder port to ensure proper sealing to prevent leakage.
    • Follow the manufacturer’s recommendations for the type of hydraulic oil and fill the system to the recommended level.

Operation:

    • Activate the hydraulic system and control the movement of the cylinder using a hydraulic control valve or other suitable control mechanism.
    • Adjust flow and pressure Settings to achieve the desired speed and force output.
    • Regularly monitor cylinder operation for any signs of abnormal behavior, such as leaks, overheating, or unusual noise.

Maintenance Of Rear Cover Trunnion Four Rod Hydraulic Cylinder:

  1. Inspecție periodică:
    • Perform routine visual inspections to check for signs of wear, leaks, or damage.
    • Inspect the rod surface, seals, and mounting connections for any abnormalities and address any issues promptly.
  2. Lubrifiere:
    • Follow the manufacturer’s guidelines for lubrication intervals and use a recommended lubricant to ensure smooth operation.
    • Apply lubrication to the rod, seals, and other moving parts to minimize friction and extend the cylinder’s lifespan.
  3. Seal Replacement:
    • Over time, seals may wear out and require replacement. If leakage is detected, carefully remove the old seals and install new ones according to the manufacturer’s specifications.

How Do You Rebuild A Hydraulic Cylinder?

Rebuilding a hydraulic cylinder involves disassembling the cylinder, inspecting its components, replacing worn or damaged parts, and reassembling it to restore its functionality. Here’s a general step-by-step guide on how to rebuild a hydraulic cylinder:

  1. Gather the Necessary Tools and Equipment:
    • Before starting the rebuild process, gather the required tools, such as wrenches, pliers, a rubber mallet, a cylinder hone, new seals and O-rings, a seal installation tool, and a hydraulic cylinder repair kit.
  2. Safety Precautions:
    • Ensure the hydraulic system is depressurized and the cylinder is disconnected from any power source.
    • Use appropriate protective equipment (PPE), such as gloves and safety glasses, to protect yourself during the rebuild.
  3. Cylinder Disassembly:
    • Remove the hydraulic cylinder from the equipment or system.
    • Carefully disassemble the cylinder, starting with removing end caps or retaining rings.
    • Release the pressure within the cylinder by retracting the rod fully.
    • Take note of the sequence of the removed components for accurate reassembly.
  4. Component Inspection:
    • Inspect all cylinder components, including the rod, piston, seals, and bearings, for signs of wear, damage, or corrosion.
    • Measure the dimensions of critical components, such as the rod and bore diameter, to ensure they are within specifications.
    • Pay close attention to the condition of seals and O-rings, as they are familiar sources of hydraulic cylinder issues.
  5. Replacement of Worn or Damaged Parts:
    • Replace any seals, O-rings, or other damaged components identified during the inspection.
    • Ensure the replacement parts are compatible with the cylinder model and meet the required specifications.
    • Lubricate the new seals or O-rings with hydraulic oil before installation.
  6. Cylinder Reassembly:
    • Clean all disassembled components thoroughly to remove any dirt or debris.
    • Apply a thin film of hydraulic oil to the components during reassembly to provide lubrication.
    • Follow the manufacturer’s instructions or repair manual to ensure correct fastener reassembly and torque specifications.
  7. Testing and Installation:
    • Once the cylinder is reassembled, test its functionality by applying hydraulic pressure.
    • Check for leaks, abnormal noises, or erratic movements during testing.
    • If the cylinder operates smoothly without issues, it can be reinstalled into the equipment or system.

Capabilitatea și capacitatea fabricii:

(1) Montaj

Avem o platformă de asamblare independentă de cercetare și dezvoltare de primă clasă. Atelierul de producție a cilindrilor hidraulici are patru linii de asamblare semiautomate pentru cilindri de ridicare și o linie de asamblare automată a cilindrilor de înclinare, cu o capacitate de producție anuală proiectată de 1 milion de bucăți. Atelierul de cilindri speciali este echipat cu diverse specificații ale unui sistem de asamblare semi-automat de curățare, cu o capacitate de producție anuală proiectată de 200.000 și dotat cu echipamente celebre de prelucrare CNC, un centru de prelucrare, un echipament special de prelucrare a cilindrilor de înaltă precizie, o mașină de sudură robotizată, o mașină de curățare automată, o mașină de asamblare automată a cilindrilor și o linie de producție automată de vopsire. Echipamente critice existente de peste 300 de seturi (seturi). Alocarea optimă și utilizarea eficientă a resurselor de echipamente asigură cerințele de precizie ale produselor și satisface nevoile de înaltă calitate ale produselor.

(2) Prelucrare

Atelierul de prelucrare este echipat cu un centru de strunjire cu șină înclinată personalizat, un centru de prelucrare, o mașină de honuire de mare viteză, un robot de sudură și alte echipamente conexe, care pot gestiona prelucrarea tuburilor cilindrice cu un diametru interior maxim de 400 mm și o lungime maximă de 6 metri.

(3) Sudură

(4) Vopsire și acoperire

Cu linii automate de acoperire cu vopsea pe bază de apă cu cilindru de dimensiuni mici și medii, pentru a realiza încărcarea și descărcarea automată a robotului și pulverizarea automată, capacitatea de proiectare de 4000 de bucăți pe schimb;
Avem, de asemenea, o linie de producție semi-automată de vopsire pentru cilindri mari, acționată de un lanț de putere, cu o capacitate de proiectare de 60 de cutii pe schimb.

(5) Testarea

Dispunem de instalații de inspecție și bancuri de testare de primă clasă pentru a ne asigura că performanța cilindrului îndeplinește cerințele.

 

 

Suntem unul dintre cei mai buni producători de cilindri hidraulici cu patru tije ușoare. Putem oferi un stoc cuprinzător de cilindri hidraulici cu patru tije ușoare. De asemenea, furnizăm cutii de viteze agricole. Am exportat produsele noastre către clienți din întreaga lume și am câștigat o bună reputație datorită calității superioare a produselor noastre și a serviciilor post-vânzare. Salutăm călduros clienții atât din țară, cât și din străinătate să ne contacteze pentru a negocia afaceri, a face schimb de informații și a să coopereze cu noi!

Faceți un tur al fabricii noastre VR:

Faceți un tur al fabricii noastre VR cu următoarele

Cum funcționează cilindrul hidraulic pentru stivuitor?

Cilindru hidraulic Aplicație:

Două tipuri de bază și principiile de funcționare ale cilindrului hidraulic:

    ro_RORO