Axiálne piestové hydraulické čerpadlo s premenlivým objemom série V30E
The V30E series axial piston variable displacement hydraulic pump is an exceptional solution designed to elevate the performance and efficiency of hydraulic systems. With its advanced features, precise control, and robust construction, this hydraulic pump sets a new standard in the industry.
The V30E series axial piston variable displacement hydraulic pump is a game-changer in hydraulic systems. Its variable displacement capability, high performance, and versatile design offer precise control, enhanced efficiency, and exceptional power delivery. By following the recommended usage methods and adhering to regular maintenance practices, the V30E series pump will continue to deliver outstanding performance, efficiency, and reliability. Embrace the power and efficiency of the V30E series axial piston variable displacement hydraulic pump to unlock the full potential of your hydraulic system.
V30E Series Axial Piston Variable Displacement Hydraulic Pump Key Characteristics:
- Variable Displacement Capability: The V30E series pump boasts advanced variable displacement technology, allowing it to adjust its output according to the system’s demand. This feature ensures optimal energy utilization, enhancing efficiency and reducing power consumption.
- High Performance and Power: With its exceptional design and engineering, the V30E series pump delivers outstanding performance and power. It operates seamlessly across various pressures and speeds, providing precise control and efficient power delivery for superior system performance.
- Versatile Design for Diverse Applications: The V30E series pump is designed to adapt to various hydraulic systems and applications. It offers versatility in mounting options, fluid compatibility, and control methods, making it suitable for various industries and machinery.
- Efficiency at Any Load: The variable displacement feature of the V30E series pump ensures efficiency across a broad range of loads. It minimizes energy losses and productivity, even under varying operating conditions by automatically adjusting the output to match the system’s requirements.
V30E Series Axial Piston Variable Displacement Hydraulic Pump Parameter:
| Veľkosť | Zdvihový objem cm³/ot. | Tlaková tyč | Rýchlosť otáčania ot/min | ||
| Hodnotené | Vrchol | Max. pre samonasávanie*1 | Max*2 | ||
| V30E75 | 75 | 400 | 450 | 2800 | 3000 |
| V30E95 | 98 | 350 | 420 | 2500 | 2900 |
| V30E160 | 160 | 350 | 420 | 2100 | 2500 |
| V30E270 | 270 | 350 | 420 | 1800 | 2000 |
| V30E280 | 280 | 350 | 420 | 2300 | 2300 |
V30E Series Axial Piston Variable Displacement Hydraulic Pump Advantages:
• Používa sa v hydraulických systémoch s otvoreným okruhom
• Nízka hlučnosť
• Viaceré riadiace moduly
• Strong structure
• Compact structure, high power density
• Long life
Axiálne piestové hydraulické čerpadlo s premenlivým objemom série V30E Aplikácia:
Usage Method Of V30E Series Axial Piston Variable Displacement Hydraulic Pump:
- Inštalácia a integrácia: Select an appropriate location within the hydraulic system to install the V30E series axial piston variable displacement hydraulic pump. Ensure proper alignment and securely mount the pump using suitable brackets or accessories. Connect the pump to the hydraulic system using compatible fittings and hoses, ensuring leak-free connections.
- Kompatibilita kvapalín: Verify that the hydraulic fluid used in the system is compatible with the V30E series pump. Refer to the manufacturer’s recommended fluid type, viscosity, and temperature range. Regularly monitor and maintain the hydraulic fluid to ensure optimal pump operation and longevity.
- Ovládanie a nastavenie: Familiarize yourself with the control options provided with the V30E series pump. Depending on the specific model, it may offer various control methods, such as manual, proportional, or electronic control. Understand the recommended control settings and adjust them accordingly to optimize pump performance.
- Optimalizácia systému: The V30E series pump allows system optimization by adjusting the pump’s displacement to match the load requirements. Take advantage of this feature to maximize energy efficiency and overall system performance.
Ako rozobrať hydraulický valec?
Disassembling a hydraulic cylinder requires careful handling and knowledge of the cylinder’s components. Here is a general guide to help you disassemble a hydraulic cylinder:
- Bezpečnosť na prvom mieste: Before starting the disassembly process, ensure the hydraulic system is depressurized and the hydraulic fluid is drained completely. Use appropriate personal protective equipment, such as gloves and safety glasses, to protect yourself from potential hazards.
- Gather Tools and Equipment: Prepare the necessary tools and equipment for disassembly. This may include wrenches, sockets, pliers, a rubber mallet, a pry bar, and a clean work surface.
- Cylinder Preparation: Remove any external attachments or accessories from the hydraulic cylinder, such as mounting brackets or hoses. Clean the exterior of the cylinder to prevent dirt or debris from entering during disassembly.
- Odpojenie hydraulických potrubí: Identify the hydraulic lines connected to the cylinder. Use appropriate tools to disconnect the fittings or couplings, ensuring you catch any residual hydraulic fluid in a suitable container.
- Remove End Caps and Retaining Bolts: Locate the end caps on the cylinder. These are typically secured with retaining bolts or screws. Remove the retaining bolts to release the end caps using the appropriate tools.
- Release Piston and Rod: With the end caps removed, the piston and rod assembly should be accessible. Tap the rod with a rubber mallet to loosen it from the cylinder. Slowly pull the piston and rod assembly out of the cylinder bore. Take note of any seals or bearings that may come with the community.
- Inspect and Replace Components: Once the cylinder is disassembled, carefully inspect each component for wear, damage, or leaks. Replace any worn or damaged seals, bearings, or other details. Clean all parts thoroughly using an appropriate solvent.
- Opätovná montáž: To reassemble the hydraulic cylinder, follow the reverse order of disassembly. Lubricate the seals and components with hydraulic fluid to ensure smooth assembly. Care to properly align the piston and rod assembly within the cylinder bore. Secure the end caps with the retaining bolts, ensuring proper torque specifications.
- Otestujte a preinštalujte: After reassembly, thoroughly inspect the cylinder to ensure all components are correctly installed. Reconnect the hydraulic lines and pressurize the system gradually. Check for any leaks or abnormal operations. If everything functions correctly, reinstall the hydraulic cylinder into its intended location.
Schopnosť a kapacita továrne:
(1) Montáž
Disponujeme prvotriednou nezávislou výskumnou a vývojovou montážnou platformou. Dielňa na výrobu hydraulických valcov má štyri poloautomatické montážne linky zdvíhacích valcov a jednu automatickú montážnu linku naklápacích valcov s projektovanou ročnou výrobnou kapacitou 1 milión kusov. Dielňa na výrobu špeciálnych valcov je vybavená rôznymi špecifikáciami poloautomatického systému čistenia a montáže s projektovanou ročnou výrobnou kapacitou 200 000 kusov a je vybavená známym CNC obrábacím zariadením, obrábacím centrom, špeciálnym zariadením na vysoko presné spracovanie valcov, robotickým zváracím strojom, automatickým čistiacim strojom, automatickým montážnym strojom valcov a automatickou lakovacou výrobnou linkou. Existujúce kritické zariadenia majú viac ako 300 súprav (sád). Optimálne alokovanie a efektívne využívanie zdrojov zariadení zabezpečuje požiadavky na presnosť výrobkov a spĺňa požiadavky na vysokú kvalitu výrobkov.
(2) Obrábanie
Obrábacia dielňa je vybavená prispôsobeným sústružníckym centrom na šikmé koľajnice, obrábacím centrom, vysokorýchlostným honovacím strojom, zváracím robotom a ďalším súvisiacim zariadením, ktoré dokáže spracovať valcové rúry s maximálnym vnútorným priemerom 400 mm a maximálnou dĺžkou 6 metrov.
(3) Zváranie
(4) Maľovanie a natieranie
S malými a stredne veľkými valcovými automatickými linkami na nanášanie farieb na vodnej báze, na dosiahnutie automatického nakladania a vykladania robotmi a automatického striekania, je projektovaná kapacita 4000 kusov za smenu;
Máme tiež poloautomatickú linku na výrobu farieb pre veľké valce poháňané reťazou s projektovanou kapacitou 60 kusov za smenu.
(5) Testovanie
Disponujeme prvotriednymi kontrolnými zariadeniami a skúšobnými zariadeniami, ktoré zabezpečujú, že výkonnosť valca spĺňa požiadavky.
Sme jedným z najlepších výrobcov hydraulických valcov. Ponúkame komplexné hydraulické valce. Poskytujeme aj zodpovedajúce poľnohospodárske prevodovkyNaše produkty sme vyvážali klientom po celom svete a vďaka vynikajúcej kvalite produktov a popredajnému servisu sme si získali dobrú reputáciu. Vítame zákazníkov doma aj v zahraničí, ktorí nás kontaktujú za účelom rokovania o obchodných záležitostiach, výmeny informácií a spolupracovať s nami!