Teleskopski cilinder za mobilno dvigalo

The mobile crane telescopic cylinder is vital in mobile crane systems and is specifically designed to enhance reach and lifting performance. This hydraulic cylinder enables crane operators to extend the boom sections of the crane, allowing for increased vertical and horizontal reach and improved lifting capacity.

The mobile crane telescopic cylinder is a crucial component that enhances mobile cranes’ reach, lifting capacity, and overall performance. With its robust construction, telescopic design, extended reach, and improved lifting capacity, this hydraulic cylinder empowers operators to tackle diverse lifting tasks easily and efficiently. By following the recommended usage methods and maintenance practices, operators can maximize the longevity and performance of the mobile crane telescopic cylinder, contributing to increased productivity, versatility, and safety on construction sites and industrial applications. Invest in this essential hydraulic component to elevate the capabilities of your mobile crane, ensuring successful and efficient lifting operations.

Mobile Crane Telescopic Cylinder Key Characteristics:

1. Robustna konstrukcija:

• The mobile crane telescopic cylinder is engineered with high-quality materials, ensuring durability and longevity even in demanding operating conditions.
• It is designed to withstand heavy loads, vibrations, and extreme weather conditions, providing reliable performance throughout its lifespan.

2. Telescopic Design:

• This hydraulic cylinder features a telescoping mechanism that allows for the extension and retraction of multiple boom sections.
• The telescopic design enables the crane to reach greater heights and distances, making it suitable for a wide range of lifting tasks.

3. Enhanced Reach and Flexibility:

• By extending the boom sections, the telescopic cylinder significantly increases the crane’s reach, both vertically and horizontally.
• It enables operators to access elevated work areas, maneuver around obstacles, and reach over obstacles, enhancing the crane’s versatility on the job site.

4. Improved Lifting Capacity:

• The telescopic cylinder enhances the crane’s lifting capacity by providing greater stability and reducing the stress on individual boom sections.
• It distributes the load more evenly across the extended boom, allowing for safer and more efficient lifting operations.

Mobile Crane Telescopic Cylinder Parameter:

Ime izdelka	Teleskopski cilinder za mobilno dvigalo
Značilnosti:	Uresničite linearno teleskopsko gibanje roke
Premer izvrtine:	75mm～360mm
Premer palice:	50mm～320mm Stroke≤22000mm
Tlak:	Največ 42 MPa
Hydraulic Steering Cylinder Applications:	Mobilni žerjav

Diagram identifikacije mobilnega žerjava:

Usage Method Of Mobile Crane Telescopic Cylinder:

1. Varnostni ukrepi:

• Pred uporabo mobilnega žerjava se prepričajte, da so upoštevani vsi varnostni predpisi in smernice.
• Conduct a thorough inspection of the crane and its components, including the telescopic cylinder, to ensure they are in proper working condition.

2. Seznanite se s kontrolami:

• Razumeti morate krmilne mehanizme in operativne postopke, specifične za vaš model mobilnega žerjava.
• Identify the controls responsible for extending and retracting the telescopic boom sections.

3. Extending the Boom:

• Activate the appropriate control to extend the telescopic cylinder, allowing the boom sections to develop fully.
• Follow the manufacturer’s guidelines and load charts to determine the safe extension limits based on the load weight and radius.

4. Retracting the Boom:

• When the lifting operation is complete, activate the control to retract the telescopic cylinder, bringing the boom sections back to their resting position.
• Ensure that each section retracts smoothly and aligns properly with the adjacent areas.

Kako odzračiti hidravlični sistem?

Bleeding air from a hydraulic system is necessary to ensure proper operation and prevent issues such as reduced performance, spongy response, or erratic behavior. Here’s a step-by-step guide on how to bleed air from a hydraulic system:

1. Prepoznajte mesta krvavitve:
   • Determine the locations in the hydraulic system where air can be trapped. Common bleed points include air bleed valves, bleed screws, or fittings with removable caps.
   • Consult the system’s manual or manufacturer guidelines for specific information on bleed points.
2. Priprava sistema:
   • Ensure the hydraulic system is turned off and the pressure is fully released.
   • If applicable, locate the hydraulic fluid reservoir and check the fluid level. Maintain the liquid level within the recommended range.
3. Začnite na najnižji točki:
   • Begin the bleeding process at the lowest point in the system where air can accumulate.
   • Zrahljajte ventil za odzračevanje ali odstranite pokrovček priključka, da odkrijete odzračevalni vijak.
4. Odprite točko odzračevanja:
   • Z ustreznim orodjem, kot je ključ ali izvijač, počasi odprite ventil za odzračevanje ali zrahljajte odzračevalni vijak.
   • Be cautious not to remove the valve or screw, which may result in fluid leakage.
5. Očistite zrak:
   • Ko se odzračevalna točka odpre, lahko skupaj s hidravlično tekočino začnejo uhajati zračni mehurčki.
   • Allow the air to purge from the system until a steady fluid flow without air bubbles is observed.
   • Keep a container or absorbent material handy to catch any fluid that may spill during this process.
6. Zaprite točko krvavitve:
   • Ko je zrak odzračen, zaprite ventil za odzračevanje ali trdno privijte odzračevalni vijak.
   • Ensure the valve or screw is adequately sealed to prevent further air entry.
7. Premakni se na naslednjo točko odzračevanja:
   • Proceed to the next highest point in the system where air can accumulate, and repeat steps 4-6.
   • Nadaljujte z odzračevanjem sistema na vsaki identificirani točki odzračevanja, vse do najvišje točke.
8. Preverite nivo tekočine:
   • Monitor the fluid level in the reservoir throughout the bleeding process and top up if necessary.
   • Use the recommended hydraulic fluid specified in the system’s manual or by the manufacturer.
9. Preizkus in preverjanje:
   • After bleeding all the identified points, operate the hydraulic system to ensure proper functionality.
   • Preverite morebitne znake gobastega odziva, nenavadnih zvokov ali neenakomernega vedenja.
   • Repeat the bleeding process if issues persist or consult a qualified technician for further assistance.

Zmogljivost in zmogljivost tovarne:

(1) Sestavljanje

Imamo prvovrstno neodvisno platformo za raziskave in razvoj. Delavnica za proizvodnjo hidravličnih cilindrov ima štiri polavtomatske montažne linije za dvižne cilindre in eno avtomatsko montažno linijo za nagibne cilindre z letno proizvodno zmogljivostjo 1 milijona kosov. Delavnica za posebne cilindre je opremljena z različnimi specifikacijami polavtomatskega sistema za čiščenje in montažo z letno proizvodno zmogljivostjo 200.000 kosov ter znano CNC obdelovalno opremo, obdelovalnim centrom, visoko precizno posebno opremo za obdelavo cilindrov, robotskim varilnim strojem, avtomatskim čistilnim strojem, avtomatskim strojem za montažo cilindrov in avtomatsko proizvodno linijo za barvanje. Obstoječa kritična oprema obsega več kot 300 kompletov (kompletov). Optimalna razporeditev in učinkovita uporaba opremnih virov zagotavljata zahteve glede natančnosti izdelkov in izpolnjujeta visoke zahteve glede kakovosti izdelkov.

(2) Strojna obdelava

Strojna delavnica je opremljena s prilagojenim centrom za struženje nagnjenih tirnic, obdelovalnim centrom, visokohitrostnim strojem za honanje, varilnim robotom in drugo sorodno opremo, ki lahko obdeluje cilindrične cevi z največjim notranjim premerom 400 mm in največjo dolžino 6 metrov.

(3) Varjenje

(4) Barvanje in premazovanje

Z majhnimi in srednje velikimi cilindričnimi avtomatskimi linijami za barvanje na vodni osnovi, za doseganje avtomatskega nakladanja in razkladanja robotov ter avtomatskega brizganja, je projektna zmogljivost 4000 kosov na izmeno;
Imamo tudi polavtomatsko linijo za proizvodnjo barv za velike jeklenke, ki jo poganja veriga, s projektno zmogljivostjo 60 zabojev na izmeno.

(5) Testiranje

Imamo prvovrstne inšpekcijske prostore in testne postaje, s katerimi zagotavljamo, da delovanje jeklenke izpolnjuje zahteve.

 

 

Smo eden najboljših proizvajalcev hidravličnih cilindrov. Ponujamo vam celovite hidravlične cilindre. Zagotavljamo tudi ustrezne kmetijski menjalnikiNaše izdelke smo izvozili strankam po vsem svetu in si prislužili dober ugled zaradi vrhunske kakovosti izdelkov in poprodajnih storitev. Z veseljem vas vabimo, da nas kontaktirate za poslovne dogovore, izmenjavo informacij in ... sodelujte z nami!