50SD08-20 Solenoid Directional Valve
The 50SD08-20 solenoid directional valve is an advanced hydraulic component designed to provide precise control and efficient operation in a wide range of industrial applications. With its cutting-edge features, reliable performance, and robust construction, this valve offers an optimal solution for directing hydraulic fluid flow.
The 50SD08-20 solenoid directional valve offers enhanced control and efficient operation for hydraulic systems. With its versatile functionality, high flow capacity, quick response time, and robust construction, this valve provides optimal fluid flow control, enhancing system performance and productivity. By following the recommended usage methods and maintenance guidelines, you can maximize the potential of this valve and achieve improved efficiency in your hydraulic applications. Upgrade your hydraulic system today with the 50SD08-20 solenoid directional valve and experience enhanced control, reliability, and productivity.
50SD08-20 Solenoid Directional Valve Characteristics:
- Versatile Functionality:
- The 50SD08-20 solenoid directional valve offers versatile functionality, making it suitable for various hydraulic applications.
- It enables precise fluid flow control, allowing efficient operation and improved system performance.
- High Flow Capacity:
- With its high flow capacity, this valve can handle substantial fluid volumes, making it ideal for applications that require large flow rates.
- The valve’s ability to accommodate high flow rates ensures efficient and reliable operation, even in demanding industrial environments.
- Quick Response Time:
- The solenoid technology incorporated in this valve ensures a rapid response time, enabling swift and accurate control of hydraulic fluid flow.
- The quick response time enhances system efficiency and enables precise adjustments during operation.
- Robust Construction:
- The 50SD08-20 solenoid directional Valve is built to withstand harsh operating conditions and provide long-lasting performance.
- Its sturdy construction and high-quality materials ensure durability, minimizing downtime and reducing maintenance requirements.
50SD08-20 Solenoid Directional Valve Parameter:
| Rated pressure | 345 bar (5000 psi) | |
| Peak flow | See performance chart | |
| Fluid | Mineral-based or synthetics with lubricating properties | |
| Fluid temperature range ℃ | -54 to 107 ℃ (Polyurethane seals） | |
| -40 to 100 ℃ (Buna N seals) | ||
| -26 to 204 ℃ (Fluorocarbon seals) | ||
| Viscosity range | 7.4 to 420 mm2/s | |
| Degree of contamination | The minimum pollution level is ISO4406 level 18/16/13, and level 15/13/11 is recommended to prolong the service life | |
| Internal Leakage | ≤ 0.15 mL/min (3 drops/min) @ 345 bar | |
| Cavity | VC08-2 | |
| Coil Duty Rating | Continuous from 85% to 115% of nominal voltage | |
| Initial Coil Current Draw at 20℃ | 1.4A at 12VDC; 0.7A at 24VDC | |
| Minimum pull-in voltage | 85% of nominal at 345 bar | |
50SD08-20 Solenoid Directional Valve Advantages:
• Continuous-duty rated coil
• Cartridges are voltage interchangeable
• Optional waterproof E-Coils rated up to IP69K
• Industry common cavity
• Hardened parts for long life and low leakage
Usage Method Of 50SD08-20 Solenoid Directional Valve:
- System Evaluation:
- Start by evaluating your hydraulic system’s requirements, including factors such as flow rate, pressure, and system dynamics.
- Determine if the 50SD08-20 Solenoid Directional Valve aligns with the specific needs of your system.
- Valve Selection:
- Select the appropriate variant of the 50SD08-20 Solenoid Directional Valve based on your system parameters and performance requirements.
- Consider factors such as flow capacity, pressure ratings, and compatibility with other system components for optimal functionality.
- Installation:
- Follow the manufacturer’s installation instructions carefully to ensure proper placement and secure mounting of the valve.
- Position the valve correctly within the hydraulic system, considering factors such as fluid flow direction and accessibility for maintenance.
- Electrical Connections:
- Connect the solenoid valve to the appropriate power source according to the manufacturer’s specifications.
- Ensure that the electrical connections are secure and comply with safety standards.
How To Remove A Shower Valve Cartridge?
Removing a shower valve cartridge may vary depending on the specific model and manufacturer. However, here is a general step-by-step guide that can help you remove a shower valve cartridge:
- Turn off the Water Supply: Locate the main water shut-off valve for your shower and turn it off to cut off the water supply. This step is essential to prevent any water flow while you work on removing the cartridge.
- Remove the Shower Handle: Most shower handles have a screw or decorative cap at the base. Look for this screw or cap and remove it using a screwdriver or by gently prying it off. Once removed, take off the handle by pulling it straight out.
- Access the Cartridge: Depending on the type of shower valve you have, you may need to remove additional parts to access the cartridge. This can include a trim plate or escutcheon that covers the valve. Use a screwdriver to remove any screws holding these parts in place and gently pull them away.
- Remove the Retaining Clip or Nut: Look for a retaining clip or nut that holds the cartridge in place. This clip or nut is usually located on the top of the cartridge and secures it to the valve body. Use pliers or an adjustable wrench to loosen and remove the clip or nut.
- Remove the Cartridge: Once the retaining clip or nut is removed, you can proceed to pull out the cartridge. Grip the cartridge firmly and pull it straight out of the valve body. If it is stuck, you may need to wiggle it gently or use a cartridge removal tool specific to your shower valve model.
- Clean and Inspect: With the cartridge removed, take a moment to clean any debris or sediment from the valve body using a soft brush or cloth. Inspect the cartridge for any signs of damage or wear. If necessary, replace the cartridge with a new one that matches the model and make of your shower valve.
- Reassemble and Test: Once you have cleaned or replaced the cartridge, reassemble the shower valve by following the steps in reverse order. Make sure all parts are securely in place. Turn on the water supply and test the shower to ensure there are no leaks and that the new cartridge is functioning properly.
Capability & Capacity Of Factory:
(1) Assembly
We have a first-class independent research and development assembly platform. The hydraulic cylinder production workshop has four semi-automatic lifting cylinder assembly lines and one automatic tilt cylinder assembly line, with a designed annual production capacity of 1 million pieces. The special cylinder workshop is equipped with various specifications of a semi-automatic cleaning assembly system with a designed annual production capacity of 200,000 and equipped with famous CNC machining equipment, a machining center, a high-precision cylinder processing special equipment, a robot welding machine, an automatic cleaning machine, automatic cylinder assembly machine, and automatic painting production line. Existing critical equipment of more than 300 sets (sets). The optimal allocation and efficient use of equipment resources ensure the accuracy requirements of products and meet the high-quality needs of products.
(2) Machining
The machining shop is equipped with a customized inclined rail turning center, machining center, high-speed honing machine, welding robot, and other related equipment, which can handle the processing of cylinder tubes with a maximum inner diameter of 400mm and a maximum length of 6 meters.
(3) Welding
(4) Painting & coating
With small and medium-sized cylinder automatic water-based paint coating lines, to achieve automatic robot loading and unloading and automatic spraying, the design capacity of 4000 pieces per shift;
We also have a semi-automatic paint production line for large cylinders powered by a power chain, with 60 cases per shift design capacity.
(5) Testing
We have first-class inspection facilities and test beds to ensure that the performance of the cylinder meets the requirements.
We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding agricultural gearboxes. We have exported our products to clients worldwide and earned a good reputation because of our superior product quality and after-sales service. We welcome customers at home and abroad to contact us to negotiate business, exchange information, and cooperate with us!