HSG Engineering Hydraulic Cylinder

HSG series engineering hydraulic cylinder is a double-acting piston rod hydraulic cylinder. Installation mode adopts earring type. According to the connection between the cylinder head and the cylinder block, there are three kinds of external thread connection, internal card critical connection, and flange connection. Engineering hydraulic cylinder is mainly used in construction, lifting, mining, and other hydraulic systems.

Front And Back Earring Installation Features:

The installation of the tail single lifting ring is suitable for the end part to move along the same moving plane curve during the working process of the piston rod. Both sides of the piston rod do not exceed 3°, with the actual meeting the plane path conditions or structural design requirements of the single earring installation conditions. At this time, the tail and rod end spherical bearings can be installed, but attention should be paid to the pressure load allowed by the installation of spherical bearings.

HSG Engineering Hydraulic Cylinder Scope Of Application:

Primarily used in construction, heavy lifting, mining, and other hydraulic systems in the engineering hydraulic cylinder, but not limited to the above aspects – pressure class 16Mpa.
When the force of the cylinder is relatively large (such as 20 tons) and the stroke is rather long (such as 2 meters), the pull rod cylinder is unsuitable for use due to the force limitation of the screw, and the engineering cylinder can be used instead.
Due to the engineering hydraulic cylinder’s enormous pressure and manufacturing process, its material cost and processing costs are higher than those of the tie rod cylinder.

HSG Engineering Hydraulic Cylinder Parameter:

Model Selection Of HSG Engineering Hydraulic Cylinder:

HG-L-01-D/DX100-E2501
HG-Double-acting hydraulic cylinder
L-cylinder head connection mode: L= thread type (cylinder diameter <080); K= clamp type (cylinder diameter >080)
01- Design No.
D/d cylinder diameter mm/ piston rod mm
100- hydraulic cylinder stroke
E-pressure grade: E=16MPa G=21MPa
2- cylinder head, cylinder connection :
1= cylinder head earring with bushing; 2= cylinder head earring with joint bearing; 3= hinge shaft (for cylinder diameter >Φ80 card key connection); 4= end flange (for cylinder diameter >Φ80 card key connection) 5= middle flange (for cylinder diameter >Φ80 card key connection)
5- piston rod end connection:
1= rod end external thread; 2= rod end internal thread (cylinder diameter >Φ63); 3= rod end external thread rod head earring with bushing; 4= rod end internal thread rod head earring with bushing (cylinder diameter >Φ63); 5= rod end external thread rod head earring with joint bearing; 6= rod end internal thread rod head earring with joint bearing (cylinder diameter >Φ63); 7= integral piston rod earring with bushing (only for cylinder diameter =Φ40, diameter 50); 8= integral piston rod earring with joint bearing (only for cylinder diameter = 40, with 50)
0- buffer part:
0= no buffer; 1= buffer at both ends; 2= cylinder head end with buffer; 3= rod head end with buffer 1- oil port connection mode:1= metric internal thread; 2= English internal thread
L1- piston rod end connection mode: L1= rod end external thread; L2= rod end internal thread
0- working medium: 0= oil, hydraulic oil; W= High water base (emulsion). Note: Those marked with A in the model description are treated as non-standard.

HSG Engineering Hydraulic Cylinder Technical Parameter:

You can use the following model notation to select the product you want. Model example: HG-L-50/40 *100-2501

HSG series engineering hydraulic cylinder basic parameters, including cylinder diameter, rod diameter, and maximum stroke.

1, the speed ratio is the ratio of the effective area of the piston cavity to the adequate size of the piston rod cavity.
2, the maximum stroke is in principle: when the speed ratio =1.33, S=8D; When the ratio =1.45, S=10D; When the balance is equal to 2, S is similar to 12D

如何找到液压缸的密封套件？

Finding the correct seal kit for a hydraulic cylinder is crucial to ensure proper fit, functionality, and performance. Here are some steps to help you find the appropriate seal kit:

1. Identify the Cylinder Manufacturer and Model:
   • Determine the manufacturer of the hydraulic cylinder. This information is often stamped or engraved on the cylinder body.
   • If possible, note down the model number or any other identifying markings on the cylinder.
2. Gather Cylinder Specifications:
   • Measure the dimensions of the cylinder, including the bore diameter, rod diameter, and stroke length.
   • Note any specific features or configurations unique to the cylinder, such as flanges, ports, or mounting styles.
3. Research the Manufacturer’s Resources:
   • Visit the manufacturer’s website or contact customer support to inquire about available seal kits for your specific cylinder model.
   • Provide the manufacturer with the cylinder specifications and any identifying information you have gathered.
4. Explore Online Hydraulic Seal Suppliers:
   • Search for reputable online hydraulic seal suppliers or distributors.
   • Utilize search filters or navigation menus on their websites to narrow down the selection based on cylinder specifications or manufacturer.
5. Utilize Seal Kit Cross-Reference Tools:
   • Some seal kit suppliers offer cross-reference tools or databases that help match cylinder models with compatible seal kits.
   • Enter the cylinder manufacturer, model, or other specifications into the cross-reference tool to find suitable seal kits.
6. Consult Hydraulic System Maintenance Manuals:
   • Check if the equipment or machinery that uses the hydraulic cylinder has a maintenance manual.
   • The manual may include information on recommended seal kits or part numbers.
7. Seek Assistance from Hydraulic Experts:
   • Reach out to hydraulic system specialists, maintenance professionals, or engineers with expertise in hydraulic systems.
   • They can guide and recommend finding the correct seal kit for your hydraulic cylinder.
8. Consider Custom Seal Kits:
   • If you cannot find a seal kit specifically designed for your cylinder model, consider contacting a manufacturer or supplier that offers custom seal kits.
   • Provide accurate measurements and cylinder specifications for a seal kit tailored to your requirements.
9. Purchase and Install the Seal Kit:
   • Once you have identified the appropriate seal kit, place an order with the supplier or manufacturer.
   • Follow the installation instructions with the seal kit carefully to ensure proper installation and optimal performance.

工厂的能力和产能：

(1) 装配

我们拥有一流的自主研发装配平台。液压油缸生产车间拥有 4 条半自动提升油缸装配线和 1 条全自动倾斜油缸装配线，设计年生产能力 100 万支。特种油缸车间配备了各种规格的半自动清洗装配系统，设计年生产能力 20 万只，并配备了知名数控加工设备、加工中心、高精度油缸加工专用设备、机器人焊接机、自动清洗机、油缸自动装配机、自动喷漆生产线等。现有关键设备 300 多台（套）。设备资源的优化配置和高效利用，保证了产品的精度要求，满足了产品的高质量需求。

(2) 机加工

加工车间配备了定制的斜轨车削中心、加工中心、高速珩磨机、焊接机器人及其他相关设备，可加工最大内径 400 毫米、最大长度 6 米的气缸管。

(3) 焊接

(4) 油漆和涂料

配备中小型圆筒自动水性漆喷涂线，实现机器人自动上下料和自动喷涂，设计产能为每班 4000 件；
我们还拥有一条由动力链驱动的大型油缸半自动喷漆生产线，设计产能为每班 60 箱。

(5) 测试

我们拥有一流的检验设施和试验台，确保气缸的性能符合要求。

We are one of the best engineering hydraulic cylinder manufacturers. We can offer comprehensive engineering hydraulic cylinder stock. We also provide corresponding 农用齿轮箱. We have exported our products to clients worldwide and earned a good reputation because of our superior product quality and after-sales service. We welcome customers at home and abroad to contact us to negotiate business, exchange information, and 与我们合作!