Hydraulic System For Metallic Equipment

The hydraulic system for metallic equipment is a robust and reliable solution designed to meet the hydraulic needs of various metal equipment in industrial applications. This advanced hydraulic system offers superior performance, efficiency, and versatility, making it essential for driving and controlling metal machinery. From metal processing to heavy equipment, metal equipment hydraulic systems provide reliable power delivery, precise control, and increased productivity.

Hydraulic System For Metallic Equipment Parameter:

Motor Power:4KW
Oil Tank:60L
System Pressure:14Mpa
System Flow:14/min

Custom Hydraulic System Model Description:

Structure Of Oil Tank:

Oil Tank Cleaning Cap:

Custom Hydraulic System:

(1)Vertical Hydraulic System

(2)Horizontal Hydraulic System

(3)Side Mounting Hydraulic System

The side mounting hydraulic pump station, that is, the oil pump device, is horizontally installed on the basis of a separate tank, and the side type can be equipped with a spare pump, which is mainly used for the system with a large mailbox capacity of 250 liters and an electric power of 7.5KW or more.

Hydraulic System For Metallic Equipment Maintenance:

• The Hydraulic System for Metallic Equipment is highly versatile and can be integrated into various metallic equipment, including presses, shears, bending machines, etc.
• Its adaptability makes it suitable for various industries, such as metal fabrication, automotive manufacturing, and heavy machinery.

How To Bleed Air From A Hydraulic System?

Bleeding air from a hydraulic system is a necessary maintenance procedure to ensure optimal performance and prevent spongy or erratic hydraulic operation. Here’s a step-by-step guide on how to bleed air from a hydraulic system:

1. Identify Bleed Points:
   • Locate the bleed points in your hydraulic system. These are typically air vent valves or bleed screws placed at high points in the system where air tends to accumulate.
2. Prepare the System:
   • Ensure that the hydraulic system is turned off and depressurized. This is crucial for safety reasons.
3. Position the Equipment:
   • Position the equipment or machinery so that the bleed points are easily accessible. It may require adjusting the orientation or tilting the equipment to allow air to escape effectively.
4. Loosen the Bleed Points:
   • Carefully loosen the air vent valves or bleed screws using the appropriate wrench or tool. Loosen them just enough to allow trapped air to escape without entirely removing them.
5. Start Bleeding:
   • Activate the hydraulic system or start the equipment, and allow the hydraulic fluid to circulate. This will create pressure and push the air towards the bleed points.
6. Bleed Air:
   • Gradually open the air vent valve or bleed screw at the system’s highest point, allowing air to escape. You may notice air bubbles or a hissing sound as air is released.
   • Maintain the bleed point open until you observe a steady flow of hydraulic fluid without any air bubbles. This indicates that air has been purged from the system.
7. Close the Bleed Points:
   • Once all the air has been bled from the system, carefully close the air vent valves or bleed screws. Ensure that they are tight enough to prevent any leaks.
8. Repeat the Process:
   • If your hydraulic system has multiple bleed points or you suspect air presence in different sections of the system, repeat steps 4 to 7 for each bleed point until all air is removed.
9. Check Fluid Level:
   • Verify the hydraulic fluid level in the reservoir or tank. If necessary, add fluid to maintain the recommended level.
10. Test System Operation:
    • With the hydraulic system fully bled, test its operation to ensure that it functions smoothly without any issues. Activate the equipment or machinery and observe its performance.

工厂的能力和产能：

(1) 装配

我们拥有一流的自主研发装配平台。液压油缸生产车间拥有 4 条半自动提升油缸装配线和 1 条全自动倾斜油缸装配线，设计年生产能力 100 万支。特种油缸车间配备了各种规格的半自动清洗装配系统，设计年生产能力 20 万只，并配备了知名数控加工设备、加工中心、高精度油缸加工专用设备、机器人焊接机、自动清洗机、油缸自动装配机、自动喷漆生产线等。现有关键设备 300 多台（套）。设备资源的优化配置和高效利用，保证了产品的精度要求，满足了产品的高质量需求。

(2) 机加工

加工车间配备了定制的斜轨车削中心、加工中心、高速珩磨机、焊接机器人及其他相关设备，可加工最大内径 400 毫米、最大长度 6 米的气缸管。

(3) 焊接

(4) 油漆和涂料

配备中小型圆筒自动水性漆喷涂线，实现机器人自动上下料和自动喷涂，设计产能为每班 4000 件；
我们还拥有一条由动力链驱动的大型油缸半自动喷漆生产线，设计产能为每班 60 箱。

(5) 测试

我们拥有一流的检验设施和试验台，确保气缸的性能符合要求。

We are one of the best hydraulic system manufacturers. We can offer comprehensive hydraulic system. We also provide corresponding 农用齿轮箱. We have exported our products to clients worldwide and earned a good reputation because of our superior product quality and after-sales service. We welcome customers at home and abroad to contact us to negotiate business, exchange information, and 与我们合作!