后盖矩形法兰四连杆液压缸

The rear cover rectangular flange four rod hydraulic cylinder is a versatile and robust four rod hydraulic cylinder designed to provide reliable and efficient linear motion in various industrial applications. With its unique design and exceptional performance, this four rod hydraulic cylinder offers outstanding power and precision, making it an ideal choice for demanding hydraulic systems.

Essential Characteristics Of Four Rod Hydraulic Cylinder:

High Strength Construction:

1. • The four rod hydraulic cylinder has a robust construction and uses high-quality materials to ensure durable and long-lasting performance.
   • It can withstand heavy loads and harsh operating conditions and is suitable for demanding industrial applications.

Rectangular Flange Design:

1. • The back cover of this four rod hydraulic cylinder is fitted with a rectangular flange, providing a safe and stable installation option.
   • Flanges are designed for easy installation and calibration, ensuring an accurate fit within the hydraulic system.

Four Rod Configuration:

1. • The four rod hydraulic cylinder adopts a four-bar design to improve stability and load-carrying capacity.
   • The four rods evenly distribute the load, reducing the stress on each component and ensuring smooth and balanced operation.

Exceptional Performance:

• • The cylinders offer high performance and provide accurate and reliable linear motion control.
  • It provides superior force output and stroke length, allowing efficient operation in a variety of applications.

Rear Cover Rectangular Flange Four Rod Hydraulic Cylinder Parameter:

后盖矩形法兰四连杆液压缸 Usage Method:

安装：

1. • Determine the proper position of the hydraulic cylinder in the hydraulic system.
   • Ensure the mounting surface is clean and free from any debris or contaminants.
   • Place the rectangular flange flush with the mounting face and secure it with appropriate bolts or fasteners.

Hydraulic Connections:

1. • Connect the hydraulic supply line to the cylinder port to ensure proper seal and prevent leakage.
   • Follow the manufacturer’s recommendations for the type of hydraulic oil and fill the system accordingly.

Operation:

• • Start the hydraulic system and use the hydraulic control valve to control the cylinder movement.
  • Adjust flow and pressure Settings to achieve the desired speed and force output.
  • Monitor four rod hydraulic cylinder operation for any anomalies or signs of failure.

后盖矩形法兰四连杆液压缸 Maintenance:

定期检查：

1. • Perform a routine visual inspection to check for any signs of wear, leakage, or damage.
   • Check seals, tie rods, and cylinder blocks for abnormalities and replace worn or damaged parts promptly.

润滑：

1. • Follow the manufacturer’s lubrication interval guidelines and use the recommended lubricant to ensure smooth operation.
   • Lubricate rods and seals to prevent friction and extend cylinder life.

更换密封件：

• • Over time, the seals may wear out and require replacement.
  • When replacing seals, ensure they are of the correct size and type recommended by the manufacturer.
  • When replacing the seal, remove and reassemble the cylinder according to the correct procedure.

How To Control Hydraulic Cylinder Speed？

Controlling the speed of a hydraulic cylinder is essential to ensure safe and efficient operation in various applications. Here are some methods to control the speed of a hydraulic cylinder:

1. Flow Control Valve:

• The most common method to control a hydraulic cylinder’s speed is using a flow control valve.
• A flow control valve regulates the amount of hydraulic fluid flowing into and out of the cylinder, thereby controlling the speed of the cylinder’s movement.
• Flow control valves are available in various types, including needle valves, adjustable orifice valves, and throttle valves.
• By adjusting the opening of the flow control valve, you can regulate the flow rate of the hydraulic fluid and, consequently, the speed of the cylinder.

2. Proportional Control Valves:

• Proportional control valves provide more precise speed control than standard flow control valves.
• These valves allow for continuous flow rate adjustment, providing finer control over the cylinder’s speed.
• Proportional control valves are often used in applications where precise positioning and speed control are critical, such as in robotics or automation systems.

3. Pressure Control:

• The speed of a hydraulic cylinder can also be indirectly controlled by adjusting the system’s pressure.
• Increasing the pressure will result in faster cylinder movement while reducing the pressure will slow it down.
• Pressure control can be achieved by using a pressure relief valve or a pressure-compensated flow control valve in the hydraulic system.

4. Load Control:

• The load on the hydraulic cylinder can affect its speed of operation.
• Increasing the load will generally slow down the cylinder due to the increased resistance.
• To control the speed under different load conditions, you can incorporate load-sensing valves or load-compensated flow control valves into the hydraulic system.
• These valves adjust the flow rate based on the load, ensuring consistent speed regardless of the load variation.

5. Cylinder Size and Design:

• The size and design of the hydraulic cylinder itself can influence its speed characteristics.
• A larger cylinder diameter generally provides higher speed due to the larger piston area, while a smaller diameter cylinder will result in slower speed.
• The cylinder’s design, including the diameter of the ports and the internal passages, can also impact the speed of the cylinder’s movement.
• When selecting a hydraulic cylinder, consider the desired speed requirements and consult the manufacturer’s specifications to choose an appropriate size and design.

工厂的能力和产能：

(1) 装配

我们拥有一流的自主研发装配平台。液压油缸生产车间拥有 4 条半自动提升油缸装配线和 1 条全自动倾斜油缸装配线，设计年生产能力 100 万支。特种油缸车间配备了各种规格的半自动清洗装配系统，设计年生产能力 20 万只，并配备了知名数控加工设备、加工中心、高精度油缸加工专用设备、机器人焊接机、自动清洗机、油缸自动装配机、自动喷漆生产线等。现有关键设备 300 多台（套）。设备资源的优化配置和高效利用，保证了产品的精度要求，满足了产品的高质量需求。

(2) 机加工

加工车间配备了定制的斜轨车削中心、加工中心、高速珩磨机、焊接机器人及其他相关设备，可加工最大内径 400 毫米、最大长度 6 米的气缸管。

(3) 焊接

(4) 油漆和涂料

配备中小型圆筒自动水性漆喷涂线，实现机器人自动上下料和自动喷涂，设计产能为每班 4000 件；
我们还拥有一条由动力链驱动的大型油缸半自动喷漆生产线，设计产能为每班 60 箱。

(5) 测试

我们拥有一流的检验设施和试验台，确保气缸的性能符合要求。

 

 

We are one of the best light four rod hydraulic cylinder manufacturers. We can offer comprehensive light four rod hydraulic cylinder stock. We also provide corresponding 农用齿轮箱.我们的产品已出口到世界各地，并凭借卓越的产品质量和售后服务赢得了良好的声誉。我们热忱欢迎海内外客户与我们联系，洽谈业务，交流信息，共谋发展。 与我们合作!