后耳环带球面轴承四连杆液压缸

The rear earring with a spherical bearing four rod hydraulic cylinder is an innovative hydraulic element designed to provide superior performance and versatility in various industrial applications. With its unique rear earring design, spherical bearings, and four rod configuration, this four rod hydraulic cylinder offers enhanced stability, precise control, and increased load-bearing capacity.

Essential Characteristics Of Four Rod Hydraulic Cylinder:

Rear Earring Design:

1. • The rear stud design provides a safe and stable installation solution that ensures reliable operation even under heavy loads and extreme conditions.
   • It simplifies installation and allows easy integration into various hydraulic systems or equipment.

Spherical Bearing:

1. • The inclusion of spherical bearings enhances four rod hydraulic cylinder flexibility and compensates for misalignment, reducing stress and wear on cylinder components.
   • The spherical bearing allows for smooth and precise movement, even when dealing with angular or off-center loads.

Four Rod Configuration:

1. • The four rod configuration increases cylinder load-bearing capacity and stability, prevents deflection, and ensures accurate linear motion control.
   • It evenly distributes the load across the rod surface, reducing the risk of premature wear or failure.

High Performance and Efficiency:

• • This four rod hydraulic cylinder provides high force output and precise control, allowing efficient and effective operation.
  • It enables accurate positioning, rapid cycle times, and optimized productivity in various industrial applications.

Rear Earring With Spherical Bearing Four Rod Hydraulic Cylinder Parameter:

后耳环带球面轴承四连杆液压缸 Usage Method:

Mounting and Installation:

1. • Consider factors such as load requirements and space constraints to determine the appropriate installation location of the four rod hydraulic cylinder within the system or equipment.
   • Ensure that the mounting surface is clean, flat and able to support the weight of the cylinder.
   • Align the rear earring with the mounting surface and secure it firmly using recommended bolts or fasteners.

Hydraulic Connections:

1. • Connect the hydraulic supply lines to the cylinder ports, ensuring proper sealing to prevent leaks.
   • Follow the manufacturer’s recommendations for the type of hydraulic oil and fill the system to the recommended level.

Operation:

• • Activate the hydraulic system and control the movement of the cylinder using a hydraulic control valve or other appropriate control mechanism.
  • Adjust flow and pressure Settings to achieve the desired speed and force output.
  • Regularly monitor four rod hydraulic cylinder operation for any signs of abnormal behavior, such as leaks, overheating, or unusual noise.

后耳环带球面轴承四连杆液压缸 Maintenance:

定期检查：

1. • Perform routine visual inspections to check for signs of wear, leakage, or damage.
   • Inspect rod surfaces, seals, and mounting connections for abnormalities and address any problems promptly.

润滑：

1. • Follow the manufacturer’s lubrication interval guidelines and use the recommended lubricant to ensure smooth operation.
   • Lubricate rods, seals, and other moving parts to minimize friction and extend four rod hydraulic cylinder life.

更换密封件：

• • Over time, seals may wear out and need to be replaced. If a leak is detected, carefully remove the old seal and install the new seal according to the manufacturer’s specifications.

How To Remove Hydraulic Cylinder Pins？

Removing hydraulic cylinder pins requires careful handling to ensure safety and prevent damage to the cylinder or surrounding components. Here is a general step-by-step guide on how to remove hydraulic cylinder pins:

1. Prepare the Work Area:
   • Ensure you have a clean and well-lit work area.
   • Wear appropriate personal protective equipment, such as safety goggles and gloves.
2. Release Hydraulic Pressure:
   • If the cylinder is part of an active hydraulic system, relieve the pressure by retracting or deactivating the system. Consult the equipment’s manual for specific instructions.
3. Secure the Cylinder:
   • Use a suitable lifting device or support to secure the cylinder in place, ensuring it is stable and won’t move during the pin removal process.
4. Locate the Pins:
   • Identify the pins that need to be removed. Hydraulic cylinders typically have pins at each end connecting them to the mounting brackets or other components.
5. Remove Retaining Clips:
   • Some pins may be secured with retaining clips. Use pliers or a suitable tool to remove the retaining clips, taking care not to damage them.
6. Position a Punch or Drift:
   • Place a punch or drift tool against the end of the pin. Ensure the punch or drift is appropriately sized to fit within the pin’s diameter.
7. Strike the Punch or Drift:
   • Using a hammer, carefully strike the punch or drift tool to apply force to the pin. Start with light taps and gradually increase the force until the pin begins to move.
8. Remove the Pin:
   • Continue striking the punch or drift tool until the pin is fully dislodged. Apply force evenly to prevent any bending or damage to the pin.
9. Repeat the Process:
   • If there are multiple pins to remove, repeat steps 4 to 8 for each pin until all have been successfully extracted.
10. Inspect the Pins:

• Once the pins are removed, inspect them for any signs of wear, damage, or deformation. If necessary, clean or replace the pins before reinstallation.

工厂的能力和产能：

(1) 装配

我们拥有一流的自主研发装配平台。液压油缸生产车间拥有 4 条半自动提升油缸装配线和 1 条全自动倾斜油缸装配线，设计年生产能力 100 万支。特种油缸车间配备了各种规格的半自动清洗装配系统，设计年生产能力 20 万只，并配备了知名数控加工设备、加工中心、高精度油缸加工专用设备、机器人焊接机、自动清洗机、油缸自动装配机、自动喷漆生产线等。现有关键设备 300 多台（套）。设备资源的优化配置和高效利用，保证了产品的精度要求，满足了产品的高质量需求。

(2) 机加工

加工车间配备了定制的斜轨车削中心、加工中心、高速珩磨机、焊接机器人及其他相关设备，可加工最大内径 400 毫米、最大长度 6 米的气缸管。

(3) 焊接

(4) 油漆和涂料

配备中小型圆筒自动水性漆喷涂线，实现机器人自动上下料和自动喷涂，设计产能为每班 4000 件；
我们还拥有一条由动力链驱动的大型油缸半自动喷漆生产线，设计产能为每班 60 箱。

(5) 测试

我们拥有一流的检验设施和试验台，确保气缸的性能符合要求。

We are one of the best light four rod hydraulic cylinder manufacturers. We can offer comprehensive light four rod hydraulic cylinder stock. We also provide corresponding 农用齿轮箱.我们的产品已出口到世界各地，并凭借卓越的产品质量和售后服务赢得了良好的声誉。我们热忱欢迎海内外客户与我们联系，洽谈业务，交流信息，共谋发展。 与我们合作!