SV/SL Series Pilot Operated Check Hydraulic Valve

作为液压缸制造商、供应商和机械产品出口商之一，我们提供液压缸和许多其他产品。

详情请与我们联系。

液压缸制造商、供应商和出口商。

SV/SL Series Pilot Operated Check Hydraulic Valve

The SV/SL series pilot operated check hydraulic valve is a versatile and reliable valve that is ideal for a wide range of hydraulic applications. It is a direct-operated check valve with an integrated pilot valve that allows the valve to be opened against the pressure of the main flow. The SV/SL series pilot operated check hydraulic valve is known for its high pressure capacity, low pressure drop, excellent flow control, durable construction, and easy maintenance.

The SV/SL series pilot operated check hydraulic valve is a high-quality, reliable, and versatile valve that is ideal for a wide range of hydraulic applications. It offers a number of benefits, including improved system performance, increased reliability, reduced maintenance costs, and extended service life. If you are looking for a check valve for your hydraulic system, the SV/SL series is a great option.

SV/SL Series Pilot Operated Check Hydraulic Valve Key Characteristics:

High Pressure Capacity: The SV/SL series pilot operated check hydraulic valve can withstand operating pressures up to 5000 psi (350 bar).
Low Pressure Drop: The SV/SL series pilot operated check hydraulic valve has a very low pressure drop, which maximizes system efficiency.
Excellent Flow Control: The SV/SL series pilot operated check hydraulic valve provides precise flow control, even at high flow rates.
Durable Construction: The SV/SL series pilot operated check hydraulic valve is made from high-quality materials and is built to withstand the rigors of demanding hydraulic applications.
Easy Maintenance: The SV/SL series pilot operated check hydraulic valve is easy to disassemble and inspect, making it simple to maintain and repair.

SV/SL Series Pilot Operated Check Hydraulic Valve Parameter:

尺寸		6	10	16	22
重量	公斤	0.8	2.3	8.5	13
最大流量	升/分钟	42	100	200	400
最大工作压力	酒吧	至 315
破裂压力	酒吧	0.5，3，5
粘度范围	毫米²/秒	2.8 至 500
流体温度范围	℃	-20 至 +70
体液		适用于 NBR 和 FKM 密封件的矿物油
体液		FKM密封用磷酸酯
污染程度		允许的最大流体污染程度：9级。NAS 1638或20/18/15，ISO4406

SV/SL Series Pilot Operated Check Hydraulic Valve Advantages:

NG6

• For base sub-plate mounting follow DIN 24340 A 、
• ISO 4401 and CETOP 121H base plates
• With or without oil release orifice
• Four opening pressure

NG10~32

• For base sub-plate mounting conform to
• DIN24340 D and ISO5781
• For screw connection
• With or without drain port
• With or without unloading function
• Four opening pressure

Usage Method Of SV/SL Series Pilot Operated Check Hydraulic Valve:

The SV/SL series pilot operated check hydraulic valve is typically used in the following applications:

防止液压系统回流
保护液压元件免受损坏
控制液压油在一个方向上的流动
保持系统中的液压

The SV/SL series pilot operated check hydraulic valve can also be used to create a variety of hydraulic circuits, such as:

Counterbalance Circuits: Counterbalance circuits prevent a load from falling under gravity when the hydraulic system is deactivated.
Regenerative Circuits: Regenerative circuits return hydraulic fluid to the reservoir when the load is moving in a direction that opposes the hydraulic force.
Sequence Circuits: Sequence circuits actuate hydraulic components in a specific order.

Maintenance Of SV/SL Series Pilot Operated Check Hydraulic Valve:

The SV/SL series pilot operated check hydraulic valve requires minimal maintenance. However, it is important to inspect the valve regularly for signs of wear or damage. If any problems are found, the valve should be replaced immediately.

Here are some tips for maintaining your SV/SL series pilot operated check hydraulic valve:

定期检查阀门是否有磨损或损坏的迹象。注意是否有裂缝、泄漏和其他缺陷。
定期用温和的肥皂水溶液清洁阀门。避免使用刺激性化学品或溶剂。
使用轻质油或油脂润滑阀门的运动部件。
如果阀门工作不正常，请立即更换。

如何控制液压缸速度？

There are a few ways to control the speed of a hydraulic cylinder:

Flow control valve: A flow control valve is a valve that restricts the flow of hydraulic fluid to the cylinder. This can be done by using a needle valve, a gate valve, or a globe valve. The more the valve is closed, the less flow there is to the cylinder, and the slower the cylinder will move.
Relief valve: A relief valve is a valve that opens when the pressure in the hydraulic system exceeds a set point. This can be used to control the speed of the cylinder by setting the relief valve to a lower pressure than the operating pressure of the system. When the cylinder extends or retracts, the pressure in the system will increase. When the pressure reaches the set point of the relief valve, the valve will open and allow some of the hydraulic fluid to flow back to the reservoir. This will reduce the pressure in the system and slow down the cylinder.
Proportional valve: A proportional valve is a valve that can be controlled electronically to vary the flow of hydraulic fluid to the cylinder. This allows for very precise control of the cylinder speed.

The best way to control the speed of a hydraulic cylinder will depend on the specific application. For example, if you need to control the speed of a cylinder very precisely, then you would use a proportional valve. If you need to control the speed of a cylinder moving very slowly, then use a relief valve.

Here are some additional tips for controlling the speed of a hydraulic cylinder:

Use the smallest cylinder possible for the application. A smaller cylinder will require less flow to move, making it easier to control the speed.
Use a hydraulic pump that is sized for the application. A pump that is too large will produce more flow than the cylinder needs, making it more difficult to control the speed.
Use a hydraulic accumulator to dampen the flow of hydraulic fluid to the cylinder. An accumulator is a device that stores hydraulic fluid under pressure. It can be used to provide a constant flow of hydraulic fluid to the cylinder, which can help to improve speed control.

工厂的能力和产能：

(1) 装配

我们拥有一流的自主研发装配平台。液压油缸生产车间拥有 4 条半自动提升油缸装配线和 1 条全自动倾斜油缸装配线，设计年生产能力 100 万支。特种油缸车间配备了各种规格的半自动清洗装配系统，设计年生产能力 20 万只，并配备了知名数控加工设备、加工中心、高精度油缸加工专用设备、机器人焊接机、自动清洗机、油缸自动装配机、自动喷漆生产线等。现有关键设备 300 多台（套）。设备资源的优化配置和高效利用，保证了产品的精度要求，满足了产品的高质量需求。