Select Page

Eesmine kate Nelja varda hüdrosilinder

Üheks hüdrosilindrite tootjaks, tarnijaks ja mehaaniliste toodete eksportijaks pakume hüdrosilindreid ja paljusid teisi tooteid.

Palun võtke meiega ühendust üksikasjade saamiseks.

Post:sales@hydraulic-cylinders.net

Tootja tarnija eksportija hüdrosilindrid.

Eesmine kate Nelja varda hüdrosilinder

The front trunnion four rod hydraulic cylinder is a high-performance hydraulic element that provides superior power, precise control, and unmatched versatility in various industrial applications. With its innovative front cover trunnion design and four-bar configuration, this four rod hydraulic cylinder offers increased stability, durability, and load-carrying capacity, making it an indispensable asset in demanding hydraulic systems.

Essential Characteristics Of Four Rod Hydraulic Cylinder:

Front Cover Trunnion Design:

    • The front cover trunnion design provides a safe and efficient installation solution that ensures reliable operation even under heavy loads and extreme conditions.
    • It simplifies installation and can be easily integrated into various hydraulic systems or equipment.

Four Rod Configuration:

    • The four rod configuration enhances the bearing capacity of the four rod hydraulic cylinder and ensures optimal stability and precise positioning.
    • It enables the four rod hydraulic cylinder to withstand side loads effectively, providing exceptional resistance to torsion and side forces.

High Power Output:

    • This four rod hydraulic cylinder has an impressive power output, allowing it to handle heavy loads efficiently.
    • It provides superior power and thrust, making it suitable for strength and lifting capacity applications.

Täpne kontroll:

    • The front cover trunnion four-bar hydraulic cylinder provides precise linear motion control to ensure accurate positioning and smooth operation.
    • It provides excellent stroke control, enabling operators to achieve the speed and precision required for specific tasks.

Front Cover Trunnion Four Rod Hydraulic Cylinder Parameter:

Usage Method Of Front Cover Trunnion Four Rod Hydraulic Cylinder:

Paigaldamine ja paigaldamine:

    • Consider load requirements and space constraints to determine the appropriate installation location of the four rod hydraulic cylinder within the system or equipment.
    • Ensure the mounting surface is clean, level, and can support the weight of the cylinder.
    • Place the front cover trunnions flush with the mounting face and secure them using recommended bolts or fasteners.

Hydraulic Connections:

    • Connect the hydraulic supply line to the cylinder port, ensuring proper seal to prevent leakage.
    • Follow the manufacturer’s recommendations for the type of hydraulic oil and fill the system to the recommended level.

Operation:

    • Activate the hydraulic system and control the movement of the cylinder using a hydraulic control valve or other suitable control mechanism.
    • Adjust flow and pressure Settings to achieve the desired speed and force output.
    • Regularly monitor four rod hydraulic cylinder operation for abnormal behavior, such as leakage, overheating, or unusual noise.

Maintenance Of Front Cover Trunnion Four Rod Hydraulic Cylinder:

Regular Inspection:

    • Perform routine visual inspections to check for signs of wear, leakage, or damage.
    • Check tie rod surfaces, seals and mounting connections for abnormalities and resolve any problems in a timely manner.

Lubrication:

    • Follow the manufacturer’s lubrication interval guidelines and use recommended lubricants to ensure smooth operation.
    • Lubricate rods, seals and other moving parts to reduce friction and extend cylinder life.

Seal Replacement:

    • Over time, seals may wear out and need to be replaced. If a leak is detected, carefully remove the old seal and install the new seal according to the manufacturer’s specifications.

How Do You Measure A Hydraulic Cylinder?

You will need a few basic tools to measure a hydraulic cylinder, such as a tape measure, calipers, or a micrometer. Here’s a step-by-step guide on how to measure a hydraulic cylinder:

  1. Determine the Purpose of Measurement:
    • Decide whether to measure the entire cylinder length or specific dimensions such as the rod diameter or stroke length.
  2. Measure the Overall Cylinder Length:
    • Extend the hydraulic cylinder to its maximum length for an accurate measurement.
    • Use a tape measure or ruler to measure from one end of the cylinder to the other, including any mounting brackets or clevises.
  3. Measure the Rod Diameter:
    • If you need to measure the rod diameter, retract the cylinder fully so that the rod is completely exposed.
    • Use calipers or a micrometer to measure the diameter of the rod. Place the measuring tool perpendicular to the rod’s axis and measure multiple points to ensure accuracy. Take note of the largest diameter measurement.
  4. Measure the Stroke Length:
    • The stroke length refers to the distance the rod can travel from fully retracted to fully extended.
    • Retract the cylinder completely and measure the distance from the base or mounting surface to the end of the rod.
  5. Measure the Bore Diameter:
    • The bore diameter refers to the internal diameter of the cylinder barrel.
    • If you need to measure the bore diameter, remove the cylinder from the equipment (if possible) and inspect the open end of the barrel.
    • Use calipers or a micrometer to measure the internal diameter of the barrel at multiple points. Take note of the largest diameter measurement.
  6. Record and Verify Measurements:
    • After obtaining the measurements, record them accurately for future reference.
    • Double-check the measurements to ensure they are correct and consistent.

Tehase võimekus ja suutlikkus:

(1) Kokkupanek

Meil on esmaklassiline sõltumatu teadus- ja arendustegevuse montaažiplatvorm. Hüdrosilindrite tootmistöökojas on neli poolautomaatset tõstesilindrite koosteliini ja üks automaatne kallutussilindrite koosteliin, mille kavandatud aastane tootmisvõimsus on 1 miljon tükki. Spetsiaalsete silindrite töökoda on varustatud erinevate spetsifikatsioonidega poolautomaatse puhastusmontaažisüsteemiga, mille kavandatud aastane tootmisvõimsus on 200 000 ja mis on varustatud kuulsate CNC-töötlemisseadmete, mehaanilise töötlemise keskuse, suure täpsusega silindrite töötlemise eriseadmete, robotkeevitusmasina, automaatse puhastusmasina, automaatse silindri kokkupanemise masina ja automaatse värvimise tootmisliiniga. Olemasolevad kriitilised seadmed rohkem kui 300 komplekti (komplekti). Seadmete ressursside optimaalne jaotamine ja tõhus kasutamine tagavad toodete täpsusnõuded ja vastavad toodete kvaliteedinõuetele.

(2) Töötlemine

Töödeldav töökoda on varustatud kohandatud kallutatud rööpse treipingi keskuse, mehaanilise keskuse, kiire lihvimismasina, keevitusroboti ja muude seotud seadmetega, mis suudavad töödelda silindritorusid, mille maksimaalne siseläbimõõt on 400 mm ja maksimaalne pikkus on 6 meetrit.

(3) Keevitamine

(4) Värvimine ja katmine

Väikese ja keskmise suurusega silindri automaatse veepõhise värvipinnakattega liinide abil, et saavutada automaatne robotlaadimine ja mahalaadimine ning automaatne pihustamine, projekteerimisvõimsus 4000 tükki vahetuse kohta;
Meil on ka poolautomaatne suurte balloonide värvimise tootmisliin, mis töötab jõukettaga ja mille projekteerimisvõimsus on 60 kasti ühe vahetuse kohta.

(5) Testimine

Meil on esmaklassilised kontrolliseadmed ja katsestendid, et tagada silindri jõudlus vastavus nõuetele.

 

 

Me oleme üks parimaid kergeid nelja vardaga hüdrosilindrite tootjaid. Me saame pakkuda terviklikku kerget nelja vardaga hüdrosilindri varu. Pakume ka vastavaid põllumajanduslikud käigukastid. Oleme eksportinud oma tooteid klientidele üle kogu maailma ja teeninud hea maine tänu meie suurepärasele tootekvaliteedile ja müügijärgsele teenindusele. Me tervitame soojalt kliente nii kodus kui ka välismaal, et võtta meiega ühendust, et pidada läbirääkimisi äri, vahetada teavet ja teha meiega koostööd!

Tehke ekskursioon meie VR-tehases:

Tehke ekskursioon meie VR-tehases koos järgmisega

Kuidas töötab kahveltõstuki hüdrosilinder?

Hüdrosilindri kasutamine:

Hüdrosilindri kaks põhitüüpi ja tööpõhimõtted:

    etET