✦ ISO 9001  ·  ISO 45001  ·  ISO 14001  ·  China's largest forklift cylinder base
sales@hydraulic-cylinders.net
Boom Cylinder for Caterpillar Large Excavator E336DZGC

Boom Cylinder for Caterpillar Large Excavator E336DZGC

Categoria: Tag: ,
Request Engineering Quote
ISO 9001:2015 Certified
100% Hydraulic Pressure Tested
12-Month Quality Warranty

Boom Cylinder for Caterpillar Large Excavator E336DZGC

Boom cylinder for Caterpillar large E336DZGC excavator — OEM replacement hydraulic cylinder
OEM-specification replacement boom cylinder for Caterpillar Large excavator E336DZGC — direct-fit, pressure tested, factory direct supply
Parametro Specifica Notes
Cylinder type Boom cylinder — double-acting OEM-equivalent replacement for Caterpillar E336DZGC
Applicazione Caterpillar Large excavator E336DZGC Direct-fit, no modification required
Bore range 160–250 mm Matches OEM bore diameter, H8 honed tolerance
Diametro dell'asta 115–180 mm C45 induction-hardened, hard chrome plated, Ra ≤ 0.2 μm
Stroke range 1,300–1,800 mm OEM-matched stroke lengths for all Caterpillar E336DZGC variants
Pressione di esercizio 30–35 MPa 250–350 bar continuous duty rating
Push force range 603–1,718 kN At maximum working pressure — full bore area
Seal package PU rod seal + NBR piston seal High-pressure large-bore compound, compatible with ISO VG 46–68 mineral oil
Port thread BSP / JIS — OEM matched Verified against Caterpillar E336DZGC port standard
Bore finish H8 tolerance, Ra 0.2–0.4 μm honed In-process air gauging on every barrel
Chrome thickness Minimum 25 μm hard chrome Eddy-current measured before seal assembly
Pressure test 100% at 1.5× rated pressure Dynamic test at 60 °C, serialised test certificate per unit
Certifications ISO 9001:2015 · ISO 14001 · ISO 45001 Full material traceability available on request

The Caterpillar large E336DZGC excavator boom cylinder is a precision-replacement hydraulic cylinder engineered for direct OEM-fit installation on Caterpillar large excavators. This Caterpillar boom cylinder matches the original bore diameter, stroke length, rod specification, port thread, and mounting pin geometry of the Caterpillar OEM component, ensuring direct-fit compatibility without modification to the Caterpillar E336DZGC excavator hydraulic circuit or attachment structure.

Excavator boom cylinder structure — barrel bore piston rod seals end cap mounting pins
Boom cylinder internal structure — key components and specifications for Caterpillar excavator replacement

Key Technical Facts

  • ✦ Cylinder type: Boom cylinder for Caterpillar large excavator E336DZGC — double-acting, OEM-fit replacement
  • ✦ Bore range: 160–250 mm — rod diameter 115–180 mm, working pressure 30–35 MPa
  • ✦ Stroke range: 1,300–1,800 mm — push force 603–1,718 kN at max pressure
  • ✦ Seal package: PU rod seal + NBR piston seal — High-pressure large-bore compound, compatible with ISO VG 46–68 mineral oil
  • ✦ Manufacturing standard: Bore H8 tolerance, rod Ra ≤ 0.2 μm hard chrome, 100% pressure test at 1.5× rated pressure
  • ✦ Supply: 3–7 working days standard catalog sizes · Custom bore-stroke 15–25 working days · ISO 9001:2015

Caterpillar Large Excavator Boom Cylinder — Technical Overview

The Caterpillar E336DZGC boom cylinder performs support and elevate the full boom assembly under maximum load as the between the upperstructure and large boom on paired mounting actuator in the excavator front attachment. High-frequency cycling — up to 600 cycles per shift in construction and quarrying applications — subjects the Caterpillar boom cylinder to progressive seal wear and rod chrome wear. Monitoring cylinder performance and replacing the unit before internal bypass develops protects the Caterpillar hydraulic pump and control valves from contamination by worn seal particles.

Mounting pin diameter tolerance is a critical but often underspecified parameter when sourcing replacement Caterpillar boom cylinders. The Caterpillar E336DZGC uses specific pin bore diameters at the cap-end and rod-end attachments. A replacement cylinder with oversized pin bores will introduce free play into the Caterpillar excavator front attachment, causing fatigue cracking at the pin boss welds within hundreds of operating hours. Our engineers verify pin bore diameter, pin bore centre distance (pin-to-pin length), and lug offset against Caterpillar OEM drawings before confirming supply.

For a complete listing of Caterpillar excavator boom cylinders, see our boom cylinder category page. Technical guidance on identifying which components are failing is in our hydraulic cylinder bypass diagnostic guide.

Caterpillar excavator boom cylinder — typical field application
Caterpillar Large excavator boom cylinder in field operation — support and elevate the full boom assembly under maximum load

OEM Compatibility — Caterpillar E336DZGC: This boom cylinder is manufactured to match the Caterpillar OEM bore, stroke, rod diameter, port thread standard, and mounting pin geometry for the E336DZGC series. The replacement Caterpillar boom cylinder installs directly into the Caterpillar E336DZGC excavator without machining, shimming, or modification. Provide the Caterpillar OEM part number when ordering for dimensional verification before despatch. Non-standard Caterpillar E336DZGC variants — including long-reach and heavy-lift arm configurations — are available as custom-manufactured units within 15 to 25 working days.

Excavator hydraulic cylinder installation positions — boom arm bucket cylinder location
Excavator front attachment cylinder positions — Boom cylinder (upperstructure to boom) · Arm cylinder (boom to arm) · Bucket cylinder (arm tip to bucket linkage)

OEM vs Replacement — Caterpillar Excavator Boom Cylinder Comparison

* Ever-Power Huachang supplies OEM-equivalent dimensional accuracy at aftermarket pricing, with 100% pressure test certification.
Specifica Ever-Power Replacement (this product) Caterpillar OEM E336DZGC
Diametro del foro OEM-matched, H8 honed Caterpillar OEM bore specification
Diametro dell'asta OEM-matched, Ra ≤ 0.2 μm hard chrome Caterpillar OEM rod specification
Port thread standard BSP / JIS — verified to Caterpillar E336DZGC Caterpillar original port standard
Seal compound PU/NBR standard · FKM on request Caterpillar OEM seal type
Mounting pin bores OEM-matched — both ends verified Caterpillar original pin geometry
Pressure test 100% dynamic at 1.5× rated — certificated Caterpillar OEM production standard
Serial traceability Serial no. + full test and material record OEM documentation standard
Lead time 3–7 days standard catalog Dependent on Caterpillar dealer stock

Seal Package — Caterpillar E336DZGC Boom Cylinder

Excavator hydraulic cylinder seal kit — PU wiper NBR piston seal components for Caterpillar E336DZGC
Caterpillar excavator boom cylinder seal kit components — PU wiper seal · NBR rod seal · piston seal · O-rings · guide bushing

The Caterpillar E336DZGC boom cylinder seal package consists of: a PU (polyurethane) rod wiper seal that excludes abrasive particles from the chrome rod surface on retraction; a primary PU or NBR rod seal that retains hydraulic oil under working pressure; NBR O-rings at the port fittings and end-cap interface; and a polyurethane piston seal that maintains the pressure differential between cap-end and rod-end chambers. Standard seals are rated for mineral hydraulic oil (ISO VG 32–68) at −20 °C to +80 °C continuous operation. For cold-climate Caterpillar excavator operation below −20 °C, specify PU/NBR-55 low-temperature compound. For high-temperature or fire-resistant fluid applications, FKM (Viton) seals are available on request. The full seal kit for the Caterpillar E336DZGC boom cylinder is available separately — contact us with the Caterpillar OEM part number to verify compatibility. See our hydraulic cylinder parts and seal guide for further information on seal selection.

Excavator hydraulic cylinder worn vs new — chrome rod condition showing replacement requirement
When to replace vs reseal — worn Caterpillar excavator boom cylinder (left) showing chrome rod damage vs new OEM-specification replacement (right)
Caterpillar E336DZGC Boom Cylinder — Replacement Selection Process:
Step 1 — Identify cylinder position: boom cylinder (between the upperstructure and large boom on paired mounting)
Step 2 — Locate OEM part number: stamped on cylinder barrel or listed in Caterpillar E336DZGC service manual
Step 3 — If part number not available: measure bore diameter (inside barrel), rod diameter (chrome surface),
stroke length (extended minus retracted), and collapsed length (pin-to-pin fully retracted)
Step 4 — Verify pin diameters at cap end and rod end — note mounting style (pin-eye, clevis, flange)
Step 5 — Submit OEM part number or measurements — receive compatibility verification and price within 24 hours

Caterpillar Boom Cylinder — Specification Reference:
Bore range: 160–250 mm Rod diameter: 115–180 mm
Stroke range: 1,300–1,800 mm Working pressure: 30–35 MPa
Push force: 603–1,718 kN at max working pressure

Application Areas — Caterpillar Excavator Boom Cylinder

Applicazione Details
Attrezzature per l'edilizia Raising and positioning the front attachment on Caterpillar E336DZGC during earthmoving and foundation work
Operazioni minerarie Heavy lift and material positioning in open-pit and underground mining with Caterpillar E336DZGC
Large Infrastructure Deep foundation, large-scale earthmoving and slope stabilisation using Caterpillar boom cylinder power
Equipment Maintenance Lowering front attachment for service access — Caterpillar E336DZGC boom cylinder must hold load without drift

Verify dimensions before ordering: Caterpillar excavator boom cylinders vary in bore, stroke, rod diameter, and pin geometry between model series and production years. Always supply the Caterpillar OEM part number or a full dimensional drawing to verify correct supply. Our engineering team verifies compatibility against Caterpillar dimensional data before processing every order.

When to replace vs reseal: Reseal the Caterpillar E336DZGC boom cylinder when rod seal leakage is present but the chrome rod surface is undamaged (no pitting, scoring, or peeling). Replace the full cylinder if: (1) chrome rod shows scoring deeper than 0.3 mm; (2) bore is out-of-round beyond 0.05 mm; (3) cylinder fails to hold load under pressure (internal bypass); or (4) barrel shows bending or weld failure. A damaged chrome rod will destroy any new seal set within 200 to 500 operating hours.

Installation Guidelines — Caterpillar E336DZGC Boom Cylinder

Install the replacement Caterpillar E336DZGC boom cylinder by first verifying pin diameter compatibility with the excavator’s existing pin set. Apply molybdenum disulphide grease to pin journals before insertion. Reconnect hydraulic hoses in their original positions — cap-end to cap-end, rod-end to rod-end. Tighten port fittings to the torque specified in the Caterpillar E336DZGC hydraulic service manual. Start the engine at idle and cycle the boom cylinder slowly five times to bleed trapped air. Inspect for external leakage at the rod seal and all port connections before returning the Caterpillar excavator to productive work.

For pre-replacement diagnostics on the Caterpillar E336DZGC, refer to our cylinder bypass diagnostic guide. Review our manufacturing quality standards for full details of our production and testing process.

Manufacturing Capability: Ever-Power Huachang

Ever-Power Huachang hydraulic cylinder manufacturing facility — Caterpillar excavator cylinder production
Ever-Power Huachang — hydraulic cylinder manufacturing facility, Hangzhou, China · ISO 9001:2015 · ISO 14001 · ISO 45001 · 100% pressure tested

Ever-Power Huachang was established in 1978 and has manufactured hydraulic cylinders continuously for 46 years. Our Caterpillar excavator boom cylinder program began with the introduction of Caterpillar machines to the Chinese market and has expanded to cover every major Caterpillar excavator model in production globally. We maintain direct relationships with Caterpillar parts distributors and technical documentation sources, allowing us to cross-reference OEM part numbers and dimensional drawings for both current production and discontinued Caterpillar E336DZGC variants.

Learn more about our manufacturing facility and engineering team on our company capability page.

Frequently Asked Questions: Caterpillar E336DZGC Boom Cylinder

How do I identify the correct boom cylinder for my Caterpillar E336DZGC?
The most reliable method is to locate the OEM part number stamped on the cylinder barrel or listed in the Caterpillar E336DZGC service manual parts list. If the number is worn or unavailable, measure: (1) bore diameter — inside the barrel after cleaning; (2) rod diameter — outside diameter of the chrome surface; (3) stroke — fully extended length minus fully retracted length; (4) collapsed length — pin-to-pin or mounting-face-to-mounting-face fully retracted. Note pin diameters at both mounting ends. Supply these four dimensions and we will identify the correct Caterpillar boom cylinder from our drawing database within 24 hours.
What is the difference between OEM and aftermarket Caterpillar E336DZGC boom cylinders?
An OEM Caterpillar boom cylinder is manufactured by Caterpillar or its designated OEM supplier and supplied through the Caterpillar dealer network. An aftermarket replacement — such as our Ever-Power Huachang unit — is manufactured by an independent producer to the same dimensional specification. The key performance factors — bore tolerance, rod chrome finish Ra ≤ 0.2 μm, seal compound selection, and pressure test standard — are the same for both. The primary practical difference is price and lead time: aftermarket Caterpillar boom cylinders are typically 30 to 50% lower cost and available with shorter lead times than Caterpillar dealer parts.
What seal material should I specify for my Caterpillar E336DZGC boom cylinder?
Standard supply includes PU (polyurethane) rod wiper seals and NBR (nitrile) piston seals, rated for mineral hydraulic oil (ISO VG 46) at −20 °C to +80 °C. For Caterpillar excavator operation in cold climates below −20 °C, specify PU/NBR-55 low-temperature compound. For high-ambient-temperature environments (steel plants, foundries, hot-climate mining) above +45 °C, specify FKM (Viton) seals rated to +150 °C continuous. Specify your operating environment when ordering and we will supply the correct seal compound for your Caterpillar E336DZGC boom cylinder.
How long does a replacement Caterpillar E336DZGC boom cylinder last?
Service life depends primarily on operating environment and maintenance practice. In standard construction applications with regular hydraulic oil changes and correct filtration (10 micron return line filter), a properly specified Caterpillar boom cylinder with Ra ≤ 0.2 μm chrome rod and correctly selected seal compound can achieve 5,000 to 10,000 operating hours before seal replacement is required. In abrasive environments — sandy ground, demolition dust, open-cut mining — wiper seal condition should be checked every 500 hours, as a failed wiper seal will score the chrome rod and dramatically reduce subsequent seal life.
What is the lead time for a Caterpillar E336DZGC boom cylinder?
Standard catalog Caterpillar boom cylinders ship within 3 to 7 working days ex-works Hangzhou for the most common Caterpillar E336DZGC sizes. Less common Caterpillar E336DZGC variants may require 7 to 15 working days. Custom bore-and-stroke combinations or non-standard port configurations require 15 to 25 working days depending on material availability. Contact us with your Caterpillar OEM part number for specific stock status and verified delivery time.
Can I fit this Caterpillar E336DZGC boom cylinder without removing the front attachment?
Boom cylinder replacement on the Caterpillar E336DZGC typically requires front attachment removal or at minimum controlled lowering to a safe position. The hydraulic circuit must be fully depressurised before disconnecting any fittings — residual accumulator pressure can cause serious injury. Depending on the Caterpillar E336DZGC variant, the cylinder mounting pins may be accessible from ground level or may require the attachment to be positioned in a specific angle for pin extraction. Refer to the Caterpillar E336DZGC service manual for the correct boom cylinder replacement procedure for your specific machine configuration.
Does the Caterpillar E336DZGC boom cylinder come with a warranty?
Yes. Ever-Power Huachang Caterpillar excavator boom cylinders are warranted against defects in materials and workmanship. Each cylinder is supplied with a serialised 100% pressure-test certificate — the serial number links to the full production record including material certificates, machining data, and pressure-test results. Warranty claims require the cylinder serial number and a description of the failure mode. For catastrophic failures within the warranty period, we request the failed cylinder be returned for inspection. Contact our after-sales team with the serial number for warranty assessment.

Caterpillar Excavator Cylinder — OEM Replacement Program

Discuss Your Caterpillar Excavator Boom Cylinder Requirement

Our engineering team has detailed Caterpillar dimensional data for all E336DZGC variants. Provide the Caterpillar OEM part number or machine serial number for fastest compatibility verification. We respond within one business day with stock availability and pricing.

✉ Contatto · Capacità di produzione · ISO 9001:2015 · 3–7 day standard lead time · 60+ countries served

Prodotti correlati

it_ITIT
it_ITIT en_USEN pt_BRPT es_ESES de_DEDE fr_FRFR arAR zh_CNZH ru_RURU ko_KRKO ka_GEKA bg_BGBG cs_CZCS da_DKDA elEL etET fiFI hu_HUHU id_IDID lt_LTLT lvLV nb_NONB nl_NLNL pl_PLPL ro_RORO sk_SKSK sl_SISL sv_SESV tr_TRTR ukUK