DBK Series Pilot Operated Pressure Relief Hydraulic Valve

The DBK series pilot-operated pressure relief hydraulic valve is a cutting-edge component that provides precise and reliable pressure control in hydraulic systems. With its advanced pilot-operated design and exceptional performance, this valve ensures efficient and safe operation by regulating system pressure within desired limits.

The DBK series pilot-operated pressure relief hydraulic valve is a high-performance solution for precise pressure control in hydraulic systems. With its pilot-operated design, pressure control accuracy, wide pressure range, and fast response time, this valve ensures efficient and safe operation while protecting system components. Following the recommended usage methods and maintenance practices, the DBK series valve delivers reliable performance, extending the lifespan of hydraulic systems. Upgrade your hydraulic system with the DBK series pilot-operated pressure relief hydraulic valve and experience optimal pressure control for enhanced system efficiency and productivity.

DBK Series Pilot Operated Pressure Relief Hydraulic Valve Key Characteristics:

• Pilot-Operated Design:
  • The DBK series valve features a pilot-operated design, allowing it to deliver precise pressure control in hydraulic systems.
  • It utilizes a control pilot to modulate the main valve, providing accurate and responsive pressure relief.
• Pressure Control Accuracy:
  • This valve offers exceptional pressure control accuracy, ensuring the hydraulic system operates within desired pressure limits.
  • It maintains consistent pressure levels, preventing over-pressurization and protecting system components.
• Wide Pressure Range:
  • The DBK Series Valve provides a wide pressure control range, making it suitable for various hydraulic applications.
  • It allows customization to match specific system requirements and optimize performance.
• Fast Response Time:
  • With its pilot-operated mechanism, the DBK series valve exhibits a rapid response time to changes in pressure.
  • It swiftly adjusts the flow path to relieve excess pressure, ensuring stable and reliable system operation.

DBK Series Pilot Operated Pressure Relief Hydraulic Valve Parameter:

DBK Series Pilot Operated Pressure Relief Hydraulic Valve Advantages:

• Plug-in structure
• Four pressure ranges
• Two adjustment types: knob, adjustment screw with protection cap

Usage Method Of DBK Series Pilot Operated Pressure Relief Hydraulic Valve:

• System Analysis:
  • Conduct a comprehensive analysis of the hydraulic system to determine the specific pressure control requirements.
  • Consider factors such as maximum operating pressure, desired pressure range, and flow rates.
• Valve Selection:
  • Select the appropriate DBK series valve variant based on the system’s pressure control specifications.
  • Consider factors such as pressure rating, flow capacity, and compatibility with other system components.
• Installation:
  • Follow the manufacturer’s instructions to correctly install the DBK series pilot operated pressure relief Valve in the hydraulic system.
  • Ensure proper alignment and secure connection to prevent leaks and optimize performance.
• Pressure Adjustment:
  • Adjust the valve’s control pilot to set the desired pressure relief level.
  • Refer to the valve’s technical documentation for guidance on adjusting the pilot pressure accurately.

How Does A Hydraulic Pressure Reducing Valve Work?

A hydraulic pressure reducing valve, also known as a pressure regulator, is a critical component in hydraulic systems. Its primary function is to regulate and reduce the pressure of hydraulic fluid to a desired level. This allows for precise control of pressure and ensures the safe and efficient operation of hydraulic machinery. Let’s explore how a hydraulic pressure reducing valve works:

1. Valve Operation:
   • A hydraulic pressure reducing valve typically consists of a valve body, a spring-loaded control element, and an adjustable spring.
   • The valve body contains an inlet port, an outlet port, and a control chamber connected to the spring-loaded control element.
2. Pressure Adjustment:
   • The adjustable spring in the control chamber determines the desired pressure setting of the valve.
   • By compressing or decompressing the spring, the target pressure can be adjusted.
3. Pressure Reduction:
   • When hydraulic fluid enters the valve through the inlet port at a higher pressure than the desired setpoint, it encounters the control element.
   • The control element, often a piston or diaphragm, is pushed against the spring by the incoming fluid pressure.
4. Spring Force Balance:
   • As the fluid pressure increases, the control element compresses the spring to resist the force exerted by the fluid.
   • Once the spring force is balanced by the fluid pressure, the control element reaches an equilibrium position, maintaining a stable output pressure.
5. Pressure Stabilization:
   • The control element modulates the flow of hydraulic fluid, restricting it to the outlet port.
   • By controlling the flow area, the valve ensures that the pressure at the outlet port remains at or below the desired setpoint.
6. Pressure Monitoring:
   • The valve continuously monitors the pressure at the outlet port.
   • If the pressure exceeds the setpoint, the control element adjusts to restrict the flow, allowing excess fluid to bypass and maintain the desired pressure.

Capacità e capacità della fabbrica:

(1) Montaggio

We have a first-class independent research and development assembly platform. The hydraulic cylinder production workshop has four semi-automatic lifting cylinder assembly lines and one automatic tilt cylinder assembly line, with a designed annual production capacity of 1 million pieces. The special cylinder workshop is equipped with various specifications of a semi-automatic cleaning assembly system with a designed annual production capacity of 200,000 and equipped with famous CNC machining equipment, a machining center, a high-precision cylinder processing special equipment, a robot welding machine, an automatic cleaning machine, automatic cylinder assembly machine, and automatic painting production line. Existing critical equipment of more than 300 sets (sets). The optimal allocation and efficient use of equipment resources ensure the accuracy requirements of products and meet the high-quality needs of products.

(2) Lavorazione

L'officina di lavorazione è dotata di un centro di tornitura su rotaia inclinata personalizzato, di un centro di lavorazione, di una levigatrice ad alta velocità, di un robot di saldatura e di altre attrezzature correlate, in grado di gestire la lavorazione di tubi cilindrici con un diametro interno massimo di 400 mm e una lunghezza massima di 6 metri.

(3) Saldatura

(4) Verniciatura e rivestimento

Con linee automatiche di verniciatura a base d'acqua a cilindro di piccole e medie dimensioni, per realizzare il carico e lo scarico automatico con robot e la spruzzatura automatica, la capacità di progettazione è di 4000 pezzi per turno;
Disponiamo anche di una linea di produzione semiautomatica di vernici per cilindri di grandi dimensioni alimentata da una catena di potenza, con una capacità di progettazione di 60 casse per turno.

(5) Test

Disponiamo di strutture di ispezione e banchi di prova di prim'ordine per garantire che le prestazioni del cilindro siano conformi ai requisiti.

We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding riduttori agricoli. We have exported our products to clients worldwide and earned a good reputation because of our superior product quality and after-sales service. We welcome customers at home and abroad to contact us to negotiate business, exchange information, and collaborare con noi!