4WRZ/H(E) Series Pilot Operated Proportional Directional Hydraulic Valve

The 4WRZ/H(E) series pilot-operated proportional directional hydraulic valve is a state-of-the-art component designed to provide exceptional precision, control, and efficiency in hydraulic systems. With its advanced pilot-operated proportional control technology, this valve enables accurate flow regulation and seamless directional changes.

The 4WRZ/H(E) series pilot-operated proportional directional hydraulic valve empowers hydraulic systems with precise flow control, versatile directional changes, and energy efficiency. Its pilot-operated proportional control technology ensures accurate and responsive flow adjustment, while the high flow capacity guarantees reliable performance even in demanding applications. By following the recommended usage methods and maintenance guidelines, you can maximize the benefits and longevity of the 4WRZ/H(E) series valve, elevating your hydraulic system to new levels of precision and control. Upgrade your hydraulic setup today and experience the power of the 4WRZ/H(E) series pilot-operated proportional directional hydraulic valve.

4WRZ/H(E) Series Pilot Operated Proportional Directional Hydraulic Valve Key Characteristics:

1. Pilot-Operated Proportional Control

• The 4WRZ/H(E) series valve utilizes pilot-operated proportional control technology, allowing precise and proportional flow adjustment based on control signals.
• This feature ensures accurate and responsive control, resulting in improved system performance, reduced energy consumption, and enhanced productivity.

2. Versatile Directional Control

• This valve offers versatile control over hydraulic fluid direction, making it suitable for a wide range of applications.
• It enables seamless activation and deactivation of hydraulic components such as cylinders, motors, and actuators in different directions, enhancing system flexibility and adaptability.

3. High Flow Capacity

• The 4WRZ/H(E) series valve is engineered to handle high flow rates, making it ideal for applications that require substantial hydraulic power.
• Its robust construction ensures reliable performance even under demanding conditions, providing consistent and efficient flow control.

4. Efficienza energetica

• By incorporating pilot-operated proportional control, this valve minimizes pressure drops and optimizes energy usage.
• It helps reduce energy consumption, resulting in cost savings and environmental benefits.

4WRZ/H(E) Series Pilot Operated Proportional Directional Hydraulic Valve Parameter:

4WRZ/H(E) Series Pilot Operated Proportional Directional Hydraulic Valve Advantages:

• Pilot-operated two-stage proportional directional valve, used to control the size and direction of the liquid flow
• Threaded connection type proportional solenoid, the coil can be disassembled separately
• Sub-plate mounting connection structure, connection size conforms to DIN2430 and ISO4401 standards
• Allineamento della molla della bobina
• WRZE type with integrated proportional amplifierr
• WRZ type external amplifier (order separately)

Usage Method Of 4WRZ/H(E) Series Pilot Operated Proportional Directional Hydraulic Valve:

1. System Evaluation

• Evaluate your hydraulic system and identify the specific flow and directional control requirements.
• Determine if the 4WRZ/H(E) series valve is suitable based on its flow capacity, pressure rating, and compatibility with your system.

2. Valve Selection

• Select the appropriate variant of the 4WRZ/H(E) series valve based on your system parameters, flow requirements, and directional control needs.
• Considerare fattori quali la portata massima, la pressione nominale, il tempo di risposta e le condizioni operative.

3. Installazione

• Follow the manufacturer’s installation instructions carefully, ensuring proper alignment and secure mounting of the valve.
• Make leak-free connections and ensure the correct flow direction alignment to guarantee optimal performance.

4. Control Signal Connection

• Collegare i cavi del segnale di controllo della valvola a un dispositivo di controllo idoneo, come un amplificatore proporzionale o un'unità di controllo elettronica.
• Ensure proper wiring and compatibility between the valve and the control device for accurate and responsive control.

How To Bleed Hydraulic Control Valve?

Bleeding a hydraulic control valve is an essential maintenance procedure to remove any trapped air or gas from the system, ensuring optimal performance and efficiency. Here’s a step-by-step guide on how to bleed a hydraulic control valve:

1. Preparare il sistema:
   • Ensure that the hydraulic system is turned off and that the pressure is relieved. This step is crucial for your safety and to prevent any accidental movement or release of high-pressure fluids.
   • Locate the bleeder valve or bleed screw on the hydraulic control valve. It is typically located on the top or side of the valve body and may have a protective cap or cover.
2. Positioning and Safety Measures:
   • Place a suitable container or absorbent material beneath the bleed valve to catch any fluid that may be expelled during the bleeding process.
   • Wear appropriate personal protective equipment (PPE), such as safety goggles and gloves, to protect yourself from hydraulic fluid splashes.
3. Opening the Bleed Valve:
   • Using an appropriate wrench or tool, carefully loosen the bleed valve or screw counterclockwise. Be cautious not to fully remove it at this stage.
   • The bleed valve may have an O-ring or sealing washer. Take note of its position and ensure it is in good condition.
4. System Activation:
   • Activate the hydraulic system by turning on the power source, such as an engine or hydraulic pump.
   • Operate the control mechanism associated with the hydraulic control valve, such as a joystick or lever, to allow fluid flow through the valve.
5. Bleeding Process:
   • Slowly open the bleed valve by turning it counterclockwise until you start to see hydraulic fluid or air bubbles escaping from the valve.
   • Allow the fluid to flow for a few seconds or until you observe a steady stream of fluid without any air bubbles. This indicates that the air has been purged from the system.
   • Be cautious not to open the bleed valve too much, as it may lead to excessive fluid loss or system damage.
6. Closing the Bleed Valve:
   • Once you have successfully bled the system, close the bleed valve by turning it clockwise. Ensure it is tightened securely but avoid over-tightening.
   • Check for any leaks around the bleed valve or other connections. If you notice any leaks, address them promptly to prevent further issues.
7. System Check:
   • Turn off the hydraulic system and inspect the fluid level in the reservoir. Add hydraulic fluid as necessary to maintain the recommended level.
   • Test the operation of the hydraulic control valve and associated components to ensure proper functionality.

Capacità e capacità della fabbrica:

(1) Montaggio

Disponiamo di una piattaforma di assemblaggio indipendente di ricerca e sviluppo di prima classe. L'officina di produzione di cilindri idraulici dispone di quattro linee di assemblaggio semiautomatiche per cilindri di sollevamento e una linea di assemblaggio automatica per cilindri di inclinazione, con una capacità produttiva annua progettata di 1 milione di pezzi. L'officina per cilindri speciali è dotata di un sistema di assemblaggio semiautomatico per la pulizia con diverse specifiche, con una capacità produttiva annua progettata di 200.000 pezzi e dotata di rinomate macchine per lavorazioni meccaniche CNC, un centro di lavoro, attrezzature speciali per la lavorazione di cilindri ad alta precisione, una macchina per saldatura robotizzata, una macchina per la pulizia automatica, una macchina per l'assemblaggio automatico dei cilindri e una linea di produzione per la verniciatura automatica. Sono disponibili oltre 300 set di attrezzature critiche. L'allocazione ottimale e l'uso efficiente delle risorse delle attrezzature garantiscono i requisiti di precisione dei prodotti e ne soddisfano le elevate esigenze di qualità.

(2) Lavorazione

L'officina di lavorazione è dotata di un centro di tornitura su rotaia inclinata personalizzato, di un centro di lavorazione, di una levigatrice ad alta velocità, di un robot di saldatura e di altre attrezzature correlate, in grado di gestire la lavorazione di tubi cilindrici con un diametro interno massimo di 400 mm e una lunghezza massima di 6 metri.

(3) Saldatura

(4) Verniciatura e rivestimento

Con linee automatiche di verniciatura a base d'acqua a cilindro di piccole e medie dimensioni, per realizzare il carico e lo scarico automatico con robot e la spruzzatura automatica, la capacità di progettazione è di 4000 pezzi per turno;
Disponiamo anche di una linea di produzione semiautomatica di vernici per cilindri di grandi dimensioni alimentata da una catena di potenza, con una capacità di progettazione di 60 casse per turno.

(5) Test

Disponiamo di strutture di ispezione e banchi di prova di prim'ordine per garantire che le prestazioni del cilindro siano conformi ai requisiti.

Siamo uno dei migliori produttori di cilindri idraulici. Offriamo una gamma completa di cilindri idraulici. Forniamo anche i relativi componenti. riduttori agricoliAbbiamo esportato i nostri prodotti a clienti in tutto il mondo e ci siamo guadagnati un'ottima reputazione grazie alla qualità superiore dei nostri prodotti e al servizio post-vendita. Invitiamo i clienti nazionali e internazionali a contattarci per negoziare affari, scambiare informazioni e collaborare con noi!