Štandardný hydraulický valec MOB Light Rod

MOB light rod hydraulic cylinder is composed of a front cylinder head, rear cylinder head, piston, cylinder, piston rod, four screw rods, eight locking nuts and gaskets, a piston locking nut, with the gasket, a piston rod end matching locking nut, a set of seals, rod end protective sleeve, oil plug. Since the cylinder of this series is only 7Mpa, the front and back covers are cast HT200, the piston rod is No. 45 chrome plated layer thickness 2-3 wires, the cylinder barrel is No. 20 roll tube, and the rod material is A3.

“Lamp rod hydraulic cylinder” usually refers to a special type of hydraulic cylinder that is designed to be light and compact. These cylinders are often used in applications where space is limited, or weight is limited.

Standard MOB Light Rod Hydraulic Cylinder Parameter:

Ľahký tyčový hydraulický valec Characteristics:

The main features and characteristics of a lamp pole hydraulic cylinder may include the following:

Compact Design: The light rod hydraulic cylinder design has a small footprint and slim shape, making it suitable for narrow Spaces or applications with limited space.

Lightweight Construction: These cylinders are made of lightweight materials such as aluminum or composite materials to reduce overall weight. This makes them suitable for applications where weight is a key factor, such as mobile devices or aerospace applications.

High Strength-to-weight Ratio: Despite lightweight construction, light-rod hydraulic cylinders are designed for high strength and durability. They are designed to withstand the forces and pressures associated with hydraulic operation while maintaining structural integrity.

Smooth Operation: These cylinders usually employ advanced sealing technology and precision machining to ensure smooth and reliable operation. This helps reduce friction and increase efficiency.

Custom Options: Light rod hydraulic cylinders can often be customized to meet specific application requirements. This includes options for stroke length, mounting configuration and hydraulic connections.

How To Take Apart A Hydraulic Cylinder?

Taking apart a hydraulic cylinder requires caution and adherence to proper safety procedures. Here is a general step-by-step guide on how to disassemble a hydraulic cylinder:

1. Safety Precautions:
   • Ensure the hydraulic system is depressurized and the cylinder is not under any load.
   • Put on personal protective equipment such as gloves and safety goggles.
   • Have a clean workspace and necessary tools readily available.
2. Removal from the System:
   • Disconnect the hydraulic hoses or fittings from the cylinder, ensuring the system is depressurized and there is no residual pressure.
   • Remove any mounting brackets or hardware that secure the cylinder to the equipment or machinery.
3. Secure the Cylinder:
   • Place the hydraulic cylinder in a secure position, such as a vise or cylinder holding fixture, to prevent it from rolling or moving during disassembly.
4. Remove the Rod End Cap:
   • Locate the rod end cap, which is typically situated on the opposite end of the piston rod.
   • If there are bolts or fasteners, carefully remove them using the appropriate tools.
   • Gently tap the end cap with a soft-faced mallet or use a rubber mallet to loosen it. Avoid using excessive force to prevent damage.
5. Extraction of the Piston Assembly:
   • Once the rod end cap is removed, the piston assembly should be accessible.
   • Slide or gently tap the piston assembly out of the cylinder barrel using a wooden dowel or a soft-faced mallet. Be cautious not to damage the piston or cylinder surfaces.
6. Removal of the Piston Rod:
   • With the piston assembly extracted, the piston rod will be exposed.
   • Inspect the piston rod for any retaining clips, snap rings, or other retaining mechanisms that may be holding it in place.
   • If present, carefully remove the retaining hardware using suitable tools.
   • Gently slide or tap the piston rod out of the cylinder barrel. Take care to avoid bending or damaging the rod during removal.
7. Disassembly of Additional Components:
   • Depending on the specific design of the hydraulic cylinder, there may be additional components such as seals, bearings, or wear rings.
   • Remove these components as needed for inspection, replacement, or maintenance purposes. Refer to the manufacturer’s documentation or specifications for guidance on dismantling specific parts.

Schopnosť a kapacita továrne:

(1) Montáž

We have a first-class independent research and development assembly platform. The forklift cylinder production workshop has four semi-automatic lifting cylinder assembly lines and one automatic tilt cylinder assembly line, with a designed annual production capacity of 1 million pieces; Special cylinder workshop is equipped with various specifications semi-automatic cleaning assembly system, designed annual production capacity of 200,000. Equipped with famous CNC machining equipment, machining center, high-precision cylinder processing special equipment, robot welding machine, automatic cleaning machine, automatic cylinder assembly machine, and automatic painting production line. Existing key equipment of more than 300 sets (sets). The optimal allocation and efficient use of equipment resources ensure the accuracy requirements of products and meet the high-quality requirements of products.

(2) Machining

Obrábacia dielňa je vybavená prispôsobeným sústružníckym centrom so šikmou koľajnicou, obrábacím centrom, vysokorýchlostným honovacím strojom, zváracím robotom a ďalšími súvisiacimi zariadeniami, ktoré zvládnu spracovanie valcových rúr s maximálnym vnútorným priemerom 400 mm a maximálnou dĺžkou 6 metrov.

(3) Zváranie

(4) Maľovanie a natieranie

S malou a strednou automatickou linkou na nanášanie farieb na báze vody, ktorá umožňuje automatické nakladanie a vykladanie robotov a automatické striekanie, s konštrukčnou kapacitou 4000 kusov za zmenu;
Máme tiež poloautomatickú linku na výrobu farieb pre veľké fľaše, poháňanú reťazovým pohonom, s konštrukčnou kapacitou 60 debien za zmenu.

(5) Testovanie

Disponujeme prvotriednymi kontrolnými zariadeniami a skúšobnými zariadeniami, ktoré zabezpečujú, že výkonnosť valca spĺňa požiadavky.

We are one of the best low-pressure hydraulic cylinder manufacturers. We can offer wide low-pressure hydraulic cylinder stock. We also provide corresponding poľnohospodárske prevodovky. Naše výrobky sme vyviezli zákazníkom do celého sveta a získali sme si dobrú povesť vďaka vynikajúcej kvalite našich výrobkov a popredajnému servisu. Srdečne vítame zákazníkov doma aj v zahraničí, aby nás kontaktovali a dohodli sa na obchodných rokovaniach, vymenili si informácie. spolupracovať s nami!