Standardni hidravlični cilinder MOB Light Rod

MOB light rod hydraulic cylinder is composed of a front cylinder head, rear cylinder head, piston, cylinder, piston rod, four screw rods, eight locking nuts and gaskets, a piston locking nut, with the gasket, a piston rod end matching locking nut, a set of seals, rod end protective sleeve, oil plug. Since the cylinder of this series is only 7Mpa, the front and back covers are cast HT200, the piston rod is No. 45 chrome plated layer thickness 2-3 wires, the cylinder barrel is No. 20 roll tube, and the rod material is A3.

“Lamp rod hydraulic cylinder” usually refers to a special type of hydraulic cylinder that is designed to be light and compact. These cylinders are often used in applications where space is limited, or weight is limited.

Standard MOB Light Rod Hydraulic Cylinder Parameter:

Hidravlični cilinder Light Rod Značilnosti:

The main features and characteristics of a lamp pole hydraulic cylinder may include the following:

Kompaktna zasnova: The light rod hydraulic cylinder design has a small footprint and slim shape, making it suitable for narrow Spaces or applications with limited space.

Lahka konstrukcija: These cylinders are made of lightweight materials such as aluminum or composite materials to reduce overall weight. This makes them suitable for applications where weight is a key factor, such as mobile devices or aerospace applications.

High Strength-to-weight Ratio: Despite lightweight construction, light-rod hydraulic cylinders are designed for high strength and durability. They are designed to withstand the forces and pressures associated with hydraulic operation while maintaining structural integrity.

Smooth Operation: These cylinders usually employ advanced sealing technology and precision machining to ensure smooth and reliable operation. This helps reduce friction and increase efficiency.

Custom Options: Light rod hydraulic cylinders can often be customized to meet specific application requirements. This includes options for stroke length, mounting configuration and hydraulic connections.

Kako razstaviti hidravlični cilinder?

Taking apart a hydraulic cylinder requires caution and adherence to proper safety procedures. Here is a general step-by-step guide on how to disassemble a hydraulic cylinder:

1. Varnostni ukrepi:
   • Ensure the hydraulic system is depressurized and the cylinder is not under any load.
   • Put on personal protective equipment such as gloves and safety goggles.
   • Have a clean workspace and necessary tools readily available.
2. Removal from the System:
   • Disconnect the hydraulic hoses or fittings from the cylinder, ensuring the system is depressurized and there is no residual pressure.
   • Remove any mounting brackets or hardware that secure the cylinder to the equipment or machinery.
3. Zavarujte valj:
   • Place the hydraulic cylinder in a secure position, such as a vise or cylinder holding fixture, to prevent it from rolling or moving during disassembly.
4. Remove the Rod End Cap:
   • Locate the rod end cap, which is typically situated on the opposite end of the piston rod.
   • If there are bolts or fasteners, carefully remove them using the appropriate tools.
   • Gently tap the end cap with a soft-faced mallet or use a rubber mallet to loosen it. Avoid using excessive force to prevent damage.
5. Extraction of the Piston Assembly:
   • Once the rod end cap is removed, the piston assembly should be accessible.
   • Slide or gently tap the piston assembly out of the cylinder barrel using a wooden dowel or a soft-faced mallet. Be cautious not to damage the piston or cylinder surfaces.
6. Removal of the Piston Rod:
   • With the piston assembly extracted, the piston rod will be exposed.
   • Inspect the piston rod for any retaining clips, snap rings, or other retaining mechanisms that may be holding it in place.
   • If present, carefully remove the retaining hardware using suitable tools.
   • Gently slide or tap the piston rod out of the cylinder barrel. Take care to avoid bending or damaging the rod during removal.
7. Disassembly of Additional Components:
   • Depending on the specific design of the hydraulic cylinder, there may be additional components such as seals, bearings, or wear rings.
   • Remove these components as needed for inspection, replacement, or maintenance purposes. Refer to the manufacturer’s documentation or specifications for guidance on dismantling specific parts.

Zmogljivost in zmogljivost tovarne:

(1) Sestavljanje

Imamo prvovrstno neodvisno platformo za raziskave in razvoj. Proizvodna delavnica za viličarje ima štiri polavtomatske montažne linije za dvižne valje in eno avtomatsko montažno linijo za nagibne valje, z letno proizvodno zmogljivostjo 1 milijona kosov. Delavnica za posebne valje je opremljena z različnimi specifikacijami polavtomatskega sistema za čiščenje in montažo, z letno proizvodno zmogljivostjo 200.000 kosov. Opremljena je z znano CNC obdelovalno opremo, obdelovalnim centrom, visoko precizno posebno opremo za obdelavo valjev, robotskim varilnim strojem, avtomatskim čistilnim strojem, avtomatskim strojem za montažo valjev in avtomatsko proizvodno linijo za barvanje. Obstoječa ključna oprema obsega več kot 300 kompletov. Optimalna razporeditev in učinkovita uporaba opremnih virov zagotavljata zahteve glede natančnosti izdelkov in izpolnjujeta visoke zahteve glede kakovosti izdelkov.

(2) Strojna obdelava

Strojna delavnica je opremljena s prilagojenim centrom za struženje nagnjenih tirnic, obdelovalnim centrom, visokohitrostnim strojem za honanje, varilnim robotom in drugo sorodno opremo, ki lahko obdeluje cilindrične cevi z največjim notranjim premerom 400 mm in največjo dolžino 6 metrov.

(3) Varjenje

(4) Barvanje in premazovanje

Z majhno in srednje veliko avtomatsko linijo za barvanje na vodni osnovi z valjčki, za doseganje avtomatskega nakladanja in razkladanja robotov ter avtomatskega škropljenja, je projektna zmogljivost 4000 kosov na izmeno;
Imamo tudi polavtomatsko linijo za proizvodnjo barv za velike jeklenke, ki jo poganja veriga, s projektno zmogljivostjo 60 zabojev na izmeno.

(5) Testiranje

Imamo prvovrstne inšpekcijske prostore in testne postaje, s katerimi zagotavljamo, da delovanje jeklenke izpolnjuje zahteve.

Smo eden najboljših proizvajalcev nizkotlačnih hidravličnih cilindrov. Ponujamo vam široko zalogo nizkotlačnih hidravličnih cilindrov. Zagotavljamo tudi ustrezne kmetijski menjalnikiNaše izdelke smo izvozili strankam po vsem svetu in si prislužili dober ugled zaradi vrhunske kakovosti izdelkov in poprodajnih storitev. Toplo vabimo stranke tako doma kot v tujini, da nas kontaktirajo za poslovne dogovore, izmenjavo informacij in ... sodelujte z nami!